iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60265-2:1993

(Main)

High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above

High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above

Applicable to three-phase alternating-current switches, having making and breaking current ratings, for indoor and outdoor installations, for rated voltages 52 kV and above, and for rated frequencies up to and including 60 Hz.

Hochspannungs-Lastschalter - Teil 2: Hochspannungs-Lastschalter für Nennspannungen ab 52 kV und darüber

Interrupteurs à haute tension - Partie 2: Interrupteurs à haute tension de tension assignée égale ou supérieure à 52 kV

Applicable aux interrupteurs à courant alternatif triphasé ayant des pouvoirs de coupure et de fermeture assignés, prévus pour l'installation à l'intérieur ou à l'extérieur, de tension assignée égale ou supérieure à 52 kV et de fréquence assignée inférieure ou égale à 60 Hz.

High-voltage switches - Part 2: High voltage switches for rated voltages of 52 kV and above (IEC 265-2:1988 + corrigendum Feb.1990)

General Information

Status
Withdrawn
Publication Date
16-Aug-1993
Withdrawal Date
16-Feb-1994
ICS
29.120.40 - Switches
Technical Committee
CLC/TC 17AC - High-voltage switchgear and controlgear
Drafting Committee
IEC/SC 17A - IEC_SC_17A
Parallel Committee
IEC/SC 17A - IEC_SC_17A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jun-2012
Completion Date
01-Jun-2012
Ref Project
SIST EN 60265-2:1998 - High-voltage switches -- Part 2: High-voltage switches for rated voltages of 52 kV and above

Relations

Replaced By
EN 62271-104:2009 - High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kV and above
Effective Date
29-Jan-2023
Amended By
EN 60265-2:1993/A2:1998 - High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above
Effective Date
29-Jan-2023
Amended By
EN 60265-2:1993/A1:1995 - High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above
Effective Date
28-Jan-2023

Buy Standard

EN 60265-2:1998EN 60265-2:1998
PreviousNext
Standard
EN 60265-2:1998
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60265-2:1998
01-februar-1998
High-voltage switches - Part 2: High voltage switches for rated voltages of 52 kV
and above (IEC 265-2:1988 + corrigendum Feb.1990)
High-voltage switches -- Part 2: High-voltage switches for rated voltages of 52 kV and
above
Hochspannungs-Lastschalter -- Teil 2: Hochspannungs-Lastschalter für
Nennspannungen ab 52 kV und darüber
Interrupteurs à haute tension -- Partie 2: Interrupteurs à haute tension de tension
assignée égale ou supérieure à 52 kV
Ta slovenski standard je istoveten z: EN 60265-2:1993
ICS:
29.120.40 Stikala Switches
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
SIST EN 60265-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 2 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 3 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 4 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 5 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 6 ----------------------

SIST EN 60265-2:1998
CEI
NORME
IEC
INTERNATIONALE
265-2
INTERNATIONAL
Première édition
STANDARD
First edition
1988
Interrupteurs à haute tension
Deuxième partie:
Interrupteurs à haute tension de tension assignée
égale ou supérieure à 52 kV
High-voltage switches
Part 2:
High-voltage switches for rated voltages
of 52 kV and above
© CEI 1988 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms. sans l'accord écrit de l'éditeur. in writing from the publisher.
Genève, Suisse
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE
MewayHapoaHaa 3netsrporexHe9ecnae HoMHccHR
I
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60265-2:1998
IEC Publication 265-2
Publication 265-2 de la CEI
1988) (First edition - 1988)
(Première édition -
High-voltage switches
Interrupteurs à haute tension
Part 2: High-voltage switches
Deuxième partie: Interrupteurs à haute
for rated voltages of 52 kV and above
tension de tension assignée égale
ou supérieure à 52 kV
CORRIGENDUM 1
Page 6
Préface, après le premier paragraphe, insérer:
Elle constitue la deuxième partie de la CEI 265; elle annule et remplace
la première édition de la CEI 265 (1968) ainsi que la CEI 265 A (1969),
265 B (1969) et 265 C (1970) pour les interrupteurs à haute tension de
tension assignée égale ou supérieure à 52 kV.
Page 7
Preface, after the first paragraph, insert:
It forms Part 2 of IEC 265 and supersedes the first edition of IEC 265
(1968) as well as IEC 265 A (1969), 265 B (1969) and 265 C (1970) for
high-voltage switches for rated voltages of 52 kV and above.
February 1990
Février 1990

---------------------- Page: 8 ----------------------

SIST EN 60265-2:1998

---------------------- Page: 9 ----------------------

SIST EN 60265-2:1998
265-2 (1) © I E C 3
CONTENTS
Page
FOREWORD 7
PREFACE 7
Clause
1. Scope and object 9
2. Normal and special service conditions 11
3. Definitions 11
3.101 Switch 11
3.102 Switch-disconnector 11
3.103 General-purpose switch 11
3.104 Limited-purpose switch 11
3.105 Special-purpose switch 11
3.106 Single capacitor bank switch 11
3.107 Back-to-back capacitor bank switch 11
3.108 Shunt reactor switch 13
3.109 Breaking capacity 13
3.110 Mainly active load breaking capacity 13
3.111 No-load transformer breaking capacity 13
3.112 Closed-loop breaking capacity 13
3.113 Cable-charging breaking capacity 13
3.114 Line-charging breaking capacity 13
3.115 Bus-bar charging breaking capacity 13
3.116 Single capacitor bank breaking capacity 13
3.117 Back-to-back capacitor bank breaking capacity 13
3.118 Capacitor bank inrush current 13
3.119 Shunt reactor breaking capacity 13
3.120 Earth-fault breaking capacity 15
3.121 Cable and line charging breaking capacity under earth fault conditions 15
3.122 Breaking current 15
3.123 (Peak) making current 15
3.124 Short-circuit making capacity 15
4. Rating 15
4.1 Rated voltage 15
4.2 Rated insulation level 15
4.3 Rated frequency 15
4.4 Rated normal current and temperature rise 15
4.5 Rated short-time withstand current 15
4.6 Rated peak withstand current 15
4.7 circuit Rated durat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60669-2-1:2022/AC:2024-01(Corrigendum)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
SIST EN IEC 60669-2-1:2023/AC:2024
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-6-2:2023/AC:2023-07(Corrigendum)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SIST EN IEC 60947-6-2:2023/AC:2023
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-6-1:2023(Main)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
SIST EN IEC 60947-6-1:2023

This part of EN 60947applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-6-2:2023(Main)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SIST EN IEC 60947-6-2:2023

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60669-2-1:2022/A11:2022(Amendment)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
SIST EN IEC 60669-2-1:2023/A11:2023

To give requirements and tests for electronic control devices, a general term to cover electronic switches, HBES/BACS switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC. This Part of IEC 60669 also applies to electronic control devices which include integrated radio receivers and transmitters.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60669-2-1:2022(Main)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
SIST EN IEC 60669-2-1:2023

This clause of Part 1 is completely replaced by the following: This part of IEC 60669 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units. It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors. It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons. This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF. Switches including only passive components such as resistors, capacitors, inductors, positive temperature coefficient (PTC) and negative temperature coefficient (NTC) components, varistors, printed wiring boards and connectors are not considered as electronic control devices. This document also applies to electronic switches and HBES/BACS switches for the operation of lighting equipment circuits and the control of the brightness of lighting equipment (dimmers) as well as the control of the speed of motors (for example, those used in ventilating fans) and for other purposes (for example, heating controls). The operation and/or control as mentioned above can be transmitted by an electronic signal via several media, for example, powerline (mains), twisted pair, optical fibre, radio frequency, infrared, etc. and are performed: - intentionally by a person via an actuating member, a key, a card, etc., via a sensing surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal; - by physical means, for example, light, temperature, humidity, time, wind velocity, presence of people; - by any other influence. This document also applies to electronic control devices which include integrated radio receivers and transmitters. This document covers only those requirements for mounting boxes which are necessary for the tests on the electronic control devices. Requirements for general purpose mounting boxes are given in the relevant part, if any, of IEC 60670. This document is not intended to cover devices falling within the scope of IEC 60730 (all parts). Electronic control devices complying with this document are suitable for use at ambient temperature not normally exceeding 25 °C but occasionally reaching 35 °C with a lower limit of the ambient air temperature of −5 °C. NOTE 1 For lower temperatures, see Annex E. Functional safety aspects are not covered by this document. Functional safety requirements are covered by the standards of the controlled devices. In locations where special conditions prevail, such as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special construction and/or additional requirements may be required. This document is not intended to cover devices which are designed to be incorporated in appliances or are intended to be delivered together with a specific appliance and which are within the scope of IEC 60730 (all parts) or IEC 61058-1. Examples of designs of electronic switches and HBES/BACS switches and functions are shown in Annex AA. Additional requirements for electronic control devices using DLT-technology in accordance with IEC 62756-1 are given in Annex CC. Electrical interface specification for phase-cut dimmer used in phase-cut dimmed lighting systems are given for information only in Annex EE. NOTE 2 Electronic switches and HBES/BACS switches without a mechanical switch in the main circuit do not provide a "full off-state". Therefore, the circuit on the load side are to be considered to be live.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-5-2:2020/A11:2022(Amendment)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
SIST EN IEC 60947-5-2:2020/A11:2022

EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-3:2021/AC:2021-11(Corrigendum)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
SIST EN IEC 60947-3:2021/AC:2022

IEC corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-3:2021(Main)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
SIST EN IEC 60947-3:2021

IEC 60947-3:2020 applies to switches, disconnectors, switch-disconnectors and fuse-combination units and their dedicated accessories to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V AC or 1 500 V DC. This fourth edition cancels and replaces the third edition published in 2008, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
addition of critical load current tests for DC switches (see 9.3.9);
addition of requirements for a conditional short-circuit rating for disconnectors, switches, and switch-disconnectors protected by circuit-breakers (see 9.3.7.2);
addition of new categories for high-efficiency motors switching (see Annex A);
addition of new Annex E for connection to aluminium conductors;
addition of new Annex F for power losses measurement.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61058-2-5:2021(Main)
Switches for appliances - Part 2-5: Particular requirements for change-over selectors
SIST EN IEC 61058-2-5:2021

IEC 61058-2-5:2018 is available as IEC 61058-2-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61058-2-5:2018 applies to change-over selectors (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - updated references due to new structure of IEC 61058-1; - changes on conducting the heating test due to the corresponding changes in IEC 61058-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day