EN 60454-3-8:2006

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre

This sheet of IEC 60454 3 contains the requirements for - glass fabric tapes with pressure-sensitive adhesive, - cellulose acetate woven fabric tapes with rubber thermosetting adhesive, - combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with thermosetting adhesive.

Selbstklebende Bänder für elektrotechnische Anwendungen - Teil 3: Bestimmungen für einzelne Materialien - Blatt 8: Selbstklebende Bänder aus Glasgewebe, Zelluloseacetat-Gewebe oder Zelluloseacetat-Baumwoll-Mischgewebe

Rubans adhésifs sensibles à la pression à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 8: Tissus de verre avec un adhésif sensible à la pression, acétate de cellulose seul ou combiné avec de la fibre viscose

IEC 60454-3-8: 2006 contient les exigences relatives aux: rubans en tissu de verre avec un adhésif sensible à la pression, rubans en tissu d'acétate de cellulose avec un adhésif en caoutchouc thermodurcissable, rubans en tissu composés de cellulose et de viscose mélangées, dont un côté est enduit d'un matériau thermoplastique, et l'autre d'un adhésif thermodurcissable. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performances établis. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non pas fondé sur cette seule spécification. Cette troisième édition de la CEI 60454-3-8 remplace la deuxième édition, parue en 1998, la CEI 60454-3-9, parue en 1998 et la CEI 60454-3-13, parue en 1995. Elle représente une consolidation des trois publications mentionnées ci-dessus, dans lesquelles toutes les exigences ont désormais été confirmées. La présente version bilingue (2014-07) correspond à la version anglaise monolingue publiée en 2006-02. Mots clés : rubans adhésifs sensibles à la pression

Tlačno občutljivi lepilni trakovi za uporabo pri elektriki – 3. del: Specifikacije posameznih materialov – 8. list: Tkani tekstilni trakovi s tlačno občutljivim lepilom iz stekla, samo celuloznega acetata ali kombinirano z viskoznimi vlakni (IEC 60454-3-8:2006)

General Information

• Status: Published
• Publication Date: 15-Mar-2006
• Withdrawal Date: 28-Feb-2009
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Mar-2006
• Completion Date: 16-Mar-2006
• Ref Project: SIST EN 60454-3-8:2006 - Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre

Relations

• Replaces: EN 60454-3-9:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive
• Effective Date: 29-Jan-2023
• Replaces: EN 60454-3-8:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Glass fabric with pressure-sensitive adhesive
• Effective Date: 29-Jan-2023
• Replaces: EN 60454-3-13:1995 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive
• Effective Date: 28-Jan-2023

Standards Content (Sample)

STANDARDTlačno občutljivi lepilni trakovi za uporabo pri elektriki – 3. del: Specifikacije posameznih materialov – 8. list: Tkani tekstilni trakovi s tlačno občutljivim lepilom iz stekla, samo celuloznega acetata ali kombinirano z viskoznimi vlakni (IEC 60454-3-8:2006)Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60454-3-8:2006(en)ICS29.035.30

EUROPEAN STANDARD EN 60454-3-8 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2006
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60454-3-8:2006 E
ICS 29.035.20 Supersedes EN 60454-3-8:1998, EN 60454-3-9:1998 & EN 60454-3-13:1995
English version
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 8: Woven fabric tapes with pressure-sensitive adhesive
based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006)
Rubans adhésifs sensibles à la pression à usages électriques Partie 3: Spécifications
pour matériaux particuliers Feuille 8: Tissus de verre avec un adhésif sensible à la pression,
acétate de cellulose seul
ou combiné avec de la fibre viscose (CEI 60454-3-8:2006)
Selbstklebende Bänder
für elektrotechnische Anwendungen Teil 3: Bestimmungen
für einzelne Materialien Blatt 8: Selbstklebende Bänder
aus Glasgewebe,
Zelluloseacetat-Gewebe oder Zelluloseacetat-Baumwoll-Mischgewebe (IEC 60454-3-8:2006)
This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 - Foreword The text of document 15/264/FDIS, future edition 3 of IEC 60454-3-8, prepared by IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60454-3-8 on 2006-03-01. This European Standard supersedes EN 60454-3-8:1998, EN 60454-3-9:1998 and EN 60454-3-13:1995. It represents a consolidation of the three above-mentioned publications in which all requirements have now been confirmed. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2009-03-01 This European Standard makes reference to International Standards. Where the International Standard referred to has been endorsed as a European Standard or a home-grown European Standard exists, this European Standard shall be applied instead. Pertinent information can be found on the CENELEC web site. __________ Endorsement notice The text of the International Standard IEC 60454-3-8:2006 was approved by CENELEC as a European Standard without any modification. __________

INTERNATIONAL STANDARD IEC60454-3-8 Third edition2006-02 Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 8 – Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
 IEC 2006

Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch J For price, see current cataloguePRICE CODE
Commission Electrotechnique InternationaleInternational Electrotechnical Commission

– 2 – 60454-3-8  IEC:2006(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________
PRESSURE-SENSITIVE ADHESIVE TAPES
FOR ELECTRICAL PURPOSES –
Part 3: Specifications for individual materials – Sheet 8 – Woven fabric tapes with pressure-sensitive adhesive
based on glass, cellulose acetate alone or combined
with viscose fibre
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60454-3-8 has been prepared by IEC technical committee 15: Insulating materials. This third edition of IEC 60454-3-8 replaces the second edition, published in 1998, IEC 60454-3-9, published in 1998 and IEC 60454-3-13, published in 1995.
It represents a consolidation of the three, above-mentioned publi
...