EN 62911:2016
(Main)Audio, video and information technology equipment - Routine electrical safety testing in production
Audio, video and information technology equipment - Routine electrical safety testing in production
IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test
Audio, Video und Einrichtungen der Informationstechnik - Stückprüfungen der elektrischen Sicherheit in der Fertigung
Appareils audio, vidéo et matériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électrique
L'IEC 62911:2016 définit des procédures d'essais individuels de série pour la vérification de la sécurité électrique destinées à être utilisées pendant ou après la fabrication d'appareils complets, de sous-ensembles ou de composants, conformes à l'IEC 60065, l'IEC 60950-1 ou l'IEC 62368-1 et alimentés par un réseau d'alimentation en courant continu ou par un réseau d'alimentation en courant alternatif, afin de détecter des défaillances de fabrication et des tolérances inacceptables dans les matériaux et la fabrication. Il n'est pas nécessaire de réaliser tous les essais définis dans la présente norme sur le site de fabrication du produit fini. Le lieu optimal pour réaliser les essais individuels de série pour la vérification de la sécurité électrique peut être déterminé par le fabricant d'appareils et révisé par le système d'évaluation de la conformité. Mots-clés: audio, video, vérification de la sécurité électrique
Oprema za avdio, video in informacijsko tehnologijo - Redno preskušanje električne varnosti v proizvodnji
Ta mednarodni standard določa redne preskuse električne varnosti za uporabo pri/po proizvodnji celotne opreme, podsestavov ali komponent, ki so v skladu s standardi IEC 60065, IEC 60950-1 ali IEC 62368-1 in se napajajo prek izmeničnega ali enosmernega napajalnega omrežja, za odkrivanje proizvodnih napak ter nesprejemljivih odstopanj v izdelavi in materialih.
OPOMBA: Ni nujno, da se vsi preskusi, določeni v tem standardu, opravijo na lokaciji proizvodnje končnega izdelka. Optimalna lokacija za redne preskuse električne varnosti je lahko določena s strani proizvajalca opreme in pregledana v okviru sheme za ugotavljanje skladnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62911:2016
01-junij-2016
1DGRPHãþD
SIST EN 50514:2014
2SUHPD]DDYGLRYLGHRLQLQIRUPDFLMVNRWHKQRORJLMR5HGQRSUHVNXãDQMH
HOHNWULþQHYDUQRVWLYSURL]YRGQML
Audio, video and information technology equipment - Routine electrical safety testing in
production
Ta slovenski standard je istoveten z: EN 62911:2016
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN 62911:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62911:2016
---------------------- Page: 2 ----------------------
SIST EN 62911:2016
EUROPEAN STANDARD EN 62911
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2016
ICS 33.160; 35.020 Supersedes EN 50514:2014
English Version
Audio, video and information technology equipment - Routine
electrical safety testing in production
(IEC 62911:2016)
Appareils audio, vidéo et matériel de traitement de Audio, Video und Einrichtungen der Informationstechnik -
l'information - Essais individuels de série, en production, Stückprüfungen der elektrischen Sicherheit in der Fertigung
pour la vérification de la sécurité électrique (IEC 62911:2016)
(IEC 62911:2016)
This European Standard was approved by CENELEC on 2016-02-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62911:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62911:2016
EN 62911:2016
European foreword
The text of document 108/616/FDIS, future edition 1 of IEC 62911, prepared by IEC/TC 108 "Safety of
electronic equipment within the field of audio/video, information technology and communication
technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62911:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-11-10
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-02-10
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 50514:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62911:2016 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 62911:2016
EN 62911:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.