Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures - Category A

Supersedes HD 405.3 together with EN 50266-1 * Corrigendum to EN issued March 2002

Allgemeine Prüfverfahren für Kabel und isolierten Leitungen im Brandfall - Prüfung der senkrechten Flammenausbreitung von senkrecht angeordneten Bündeln von Kabeln und isolierte Leitungen - Teil 2-2: Prüfverfahren - Prüfart A

Méthodes d'essai communes aux câbles soumis au feu - Essai de propagation verticale de la flamme des fils ou câbles en nappes en position verticale - Partie 2-2: Procédures - Catégorie A

Splošne metode za preskušanje kablov v požarnih razmerah - Preskus pri navpičnem širjenju ognja po navpično nameščenih žičnih kitah ali kablih - 2-2. del: Postopki - Kategorija A

General Information

Status
Withdrawn
Publication Date
07-Feb-2001
Withdrawal Date
31-Jul-2002
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Aug-2012
Completion Date
01-Aug-2012

Relations

Buy Standard

Standard
EN 50266-2-2:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50266-2-2:2002
01-april-2002
1DGRPHãþD
SIST HD 405.3 S1:1999
6SORãQHPHWRGH]DSUHVNXãDQMHNDEORYYSRåDUQLKUD]PHUDK3UHVNXVSUL
QDYSLþQHPãLUMHQMXRJQMDSRQDYSLþQRQDPHãþHQLKåLþQLKNLWDKDOLNDEOLKGHO
3RVWRSNL.DWHJRULMD$
Common test methods for cables under fire conditions - Test for vertical flame spread of
vertically-mounted bunched wires or cables - Part 2-2: Procedures - Category A
Allgemeine Prüfverfahren für Kabel und isolierten Leitungen im Brandfall - Prüfung der
senkrechten Flammenausbreitung von senkrecht angeordneten Bündeln von Kabeln und
isolierte Leitungen - Teil 2-2: Prüfverfahren - Prüfart A
Méthodes d'essai communes aux câbles soumis au feu - Essai de propagation verticale
de la flamme des fils ou câbles en nappes en position verticale - Partie 2-2: Procédures -
Catégorie A
Ta slovenski standard je istoveten z: EN 50266-2-2:2001
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
SIST EN 50266-2-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50266-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 13.220.40; 29.020; 29.060.20 Supersedes HD 405.3 S1:1993
English version
Common test methods for cables under fire conditions -
Test for vertical flame spread of
vertically-mounted bunched wires or cables
Part 2-2: Procedures - Category A
Méthodes d'essai communes aux câbles Allgemeine Prüfverfahren für Kabel und
soumis au feu - Essai de propagation isolierten Leitungen im Brandfall - Prüfung
verticale de la flamme des fils ou câbles der senkrechten Flammenausbreitung von
en nappes en position verticale senkrecht angeordneten Bündeln von
Partie 2-2: Procédures - Catégorie A Kabeln und isolierte Leitungen
Teil 2-2: Prüfverfahren - Prüfart A
This European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50266-2-2:2001 E

---------------------- Page: 2 ----------------------

EN 50266-2-2:2001 - 2 -
Foreword
This European Standard was prepared by Working Group 10 of the Technical Committee CENELEC
TC 20, Electric cables.
When used in conjunction with EN 50266-1 this European Standard supersedes HD 405.3 S1 in respect
of test category A.
All pre-existing categories of test from HD 405.3 S1 have been retained and updated in the different
parts 2. A new category (category D) has been added to cater for testing at very low non-metallic
volumes.
The description of the apparatus given in EN 50266-1 updates that in HD 405.3 S1.
The text of the draft was submitted to the Unique Acceptance procedure and was approved by
CENELEC as EN 50266-2-2 on 2000-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-08-01
Annexes designated 'normative' are part of the body of the standard.
Annexes designated 'informative' are given for information only.
In this standard, annex A is normative and annex B is informative.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50266-2-2:2001
Contents
Page
Introduction.4
1 Scope.5
2 N
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.