EN 60317-59:2016

Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240

IEC 60317-59:2015 specifies the requirements of enamelled round copper winding wire of class 240 with a single coating of polyamide-imide resin. The range of nominal conductor diameters covered by this part of IEC 60317 is: - grade 1: 0,180 mm up to and including 1,600 mm; - grade 2: 0,180 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. Keywords: insulated wires used for windings, enamelled round copper winding wire of class 240

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 59: Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 240

Spécifications pour types particuliers de fils de bobinage - Partie 59: Fil de section circulaire en cuivre émaillé avec polyamide-imide, classe 240

L'IEC 60317-59:2015 spécifie les exigences relatives aux fils de bobinage de section circulaire en cuivre émaillé de classe 240 avec un seul revêtement en résine polyamide-imide. La gamme des diamètres nominaux des conducteurs couverte par la présente partie de l'IEC 60317 est: - grade 1: 0,180 mm jusques et y compris 1,600 mm; - grade 2: 0,180 mm jusques et y compris 1,600 mm. Les diamètres nominaux des conducteurs sont spécifiés dans l'Article 4 de l'IEC 60317-0-1:2013. Mots clés: fils isolés utilisés pour les enroulements, fils de bobinage de section circulaire en cuivre émaillé de classe 240

Zahteve za posebne vrste žic za navijanje - 59. del: Okrogla bakrena žica, lakirana s poliamid-imidnim lakom, razred 240

Ta del standarda IEC 60317 določa zahteve za emajlirane okrogle bakrene navijalne žice razreda 240 z enojno prevleko iz poliamid-imidne smole.
Razpon nazivnega premera prevodnika, ki ga zajema ta del standarda IEC 60317, je:
– tip 1: 0,180 mm do in vključno s 1600 mm;
– tip 2: 0,180 mm do in vključno s 1600 mm.
Nazivni premeri prevodnika so navedeni v točki 4 standarda IEC 60317-0-1:2013.

General Information

• Status: Published
• Publication Date: 04-Feb-2016
• Withdrawal Date: 08-Dec-2018
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-Feb-2016
• Completion Date: 05-Feb-2016
• Ref Project: SIST EN 60317-59:2016 - Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240

Relations

• Amended By: EN 60317-59:2016/prA1:2023 - Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
• Effective Date: 14-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-59:2016
01-april-2016
Zahteve za posebne vrste žic za navijanje - 59. del: Okrogla bakrena žica, lakirana
s poliamid-imidnim lakom, razred 240
Specifications for particular type of winding wires - Part 59: Polyamideimide enameled
round copper wire, class 240
Ta slovenski standard je istoveten z: EN 60317-59:2016
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN 60317-59:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-59:2016

---------------------- Page: 2 ----------------------

SIST EN 60317-59:2016


EUROPEAN STANDARD EN 60317-59

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2016
ICS 29.060.10

English Version
Specifications for particular type of winding wires - Part 59:
Polyamideimide enameled round copper wire, class 240
(IEC 60317-59:2015)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 59: Fil de section circulaire en cuivre émaillé avec Wickeldrähten - Teil 59: Runddrähte aus Kupfer, lackisoliert
polyamide-imide, classe 240 mit Polyamidimid, Klasse 240
(IEC 60317-59:2015) (IEC 60317-59:2015)
This European Standard was approved by CENELEC on 2015-12-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60317-59:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60317-59:2016
EN 60317-59:2016
European foreword
The text of document 55/1502/CDV, future edition 1 of IEC 60317-59, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60317-59:2016.
The following dates are fixed:
(dop) 2016-09-09
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-12-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60317-59:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 (series)
NOTE Harmonized in EN 60264 (series).
IEC 60317 (series) NOTE Harmonized in EN 60317 (series).
IEC 60851 (series) NOTE Harmonized in EN 60851 (series).

2

---------------------- Page: 4 ----------------------

SIST EN 60317-59:2016
EN 60317-59:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
...