EN IEC 60598-2-2:2024
(Main)Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires
This part of IEC 60598 specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V. It also specifies requirements for recessed air-handling luminaires for use with a ventilation duct or ventilated space (plenum). NOTE The expressions “ventilation” and “ventilated” in this section refer to forced ventilation.
Leuchten - Teil 2-2: Besondere Anforderungen - Einbauleuchten und luftführende Einbauleuchten
Luminaires - Partie 2-2: Exigences particulières - Luminaires encastrés et luminaires à circulation d'air encastrés
L'IEC 60598-2-2:2023 spécifie des exigences pour les luminaires encastrés qui comporte des sources lumineuses électriques, pour un fonctionnement à des tensions d'alimentation jusqu'à 1 000 V. Elle spécifie également des exigences pour les luminaires à circulation d'air encastrés pour un fonctionnement avec un conduit de ventilation ou un espace ventilé (plenum). Cette quatrième édition annule et remplace la troisième édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente (il n'y a aucune modification technique essentielle, voir l’Annexe D):
les exigences spécifiques aux luminaires encastrés données dans l'IEC 60598-1 sont désormais intégrées dans la présente Partie 2-2;
les exigences relatives aux luminaires à circulation d'air données dans l'IEC 60598-2-19 sont désormais intégrées dans la présente Partie 2-2;
les références à la Partie 1 ont été mises à jour.
Svetilke - 2-2. del: Posebne zahteve - Vgradne svetilke in vgradne prezračevalne svetilke (IEC 60598-2-2:2023)
Ta del standarda IEC 60598 določa zahteve za vgradne svetilke, ki vsebujejo električne svetlobne vire, namenjene za delovanje z omrežnim napajanjem do 1000 V. Prav tako določa zahteve za vgradne svetilke z odvajanjem zraka, namenjene za uporabo z prezračevalnim kanalom ali s prezračevanim prostorom (komoro).
OPOMBA: Izraza »prezračevanje« in »prezračevano« v tem razdelku se navezujeta na prisilno prezračevanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Svetilke - 2-2. del: Posebne zahteve - Vgradne svetilke in vgradne prezračevalne
svetilke (IEC 60598-2-2:2023)
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-
handling luminaires (IEC 60598-2-2:2023)
Leuchten - Teil 2-2: Besondere Anforderungen - Einbauleuchten und luftführende
Einbauleuchten (IEC 60598-2-2:2023)
Luminaires - Partie 2-2: Exigences particulières - Luminaires encastrés et luminaires à
circulation d'air encastrés (IEC 60598-2-2:2023)
Ta slovenski standard je istoveten z: EN IEC 60598-2-2:2024
ICS:
29.140.40 Svetila Luminaires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60598-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 29.140.50 Supersedes EN 60598-2-2:2012
English Version
Luminaires - Part 2-2: Particular requirements - Recessed
luminaires and recessed air-handling luminaires
(IEC 60598-2-2:2023)
Luminaires - Partie 2-2: Exigences particulières - Leuchten - Teil 2-2: Besondere Anforderungen -
Luminaires encastrés et luminaires à circulation d'air Einbauleuchten und luftführende Einbauleuchten
encastrés (IEC 60598-2-2:2023)
(IEC 60598-2-2:2023)
This European Standard was approved by CENELEC on 2024-02-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60598-2-2:2024 E
European foreword
The text of document 34D/1681/FDIS, future edition 4 of IEC 60598-2-2, prepared by SC 34D
"Luminaires" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60598-2-2:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-11-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-02-28
document have to be withdrawn
This document supersedes EN 60598-2-2:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60598-2-2:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60598-2-19 NOTE Approved as EN 60598-2-19
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V
IEC 60245 series Rubber insulated cables - Rated voltages up to - -
and including 450/750 V
IEC 60598-1 - Luminaires - Part 1: General requirements and EN IEC 60598-1 -
tests
IEC 60598-2-2 ®
Edition 4.0 2023-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Luminaires –
Part 2-2: Particular requirements – Recessed luminaires and recessed air-
handling luminaires
Luminaires –
Partie 2-2: Exigences particulières – Luminaires encastrés et luminaires à
circulation d'air encastrés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50 ISBN 978-2-8322-6331-0
– 2 – IEC 60598-2-2:2023 © IEC 2023
CONTENTS
FOREWORD . 3
2.1 Scope . 5
2.2 Normative references . 5
2.3 Terms and definitions . 5
2.4 General test requirements . 6
2.5 Classification of luminaires . 6
2.6 Marking . 6
2.7 Construction . 7
2.8 Creepage distances and clearances . 7
2.9 Provision for earthing . 7
2.10 Terminals . 7
2.11 External and internal wiring . 7
2.12 Protection against electric shock . 7
2.13 Endurance tests and thermal tests . 8
2.14 Resistance to dust and moisture . 8
2.15 Insulation resistance and electric strength . 9
2.16 Resistance to heat, fire and tracking . 9
Annex A (normative) Measurement of ambient temperature in an installation . 10
Annex B (normative) Recessed luminaires thermal test methods . 11
Annex C (informative) Explanation of t with respect to air-handling luminaires . 14
a
Annex D (informative) Schedule of amended subclauses containing more serious or
critical requirements which require products to be retested . 15
Bibliography . 16
Figure 1 – Symbol for luminaires not suitable for direct mounting on normally
flammable surfaces (suitable only for mounting on non-combustible surfaces) . 6
Figure 2 – Symbol for luminaires not suitable for covering with thermally insulating
material . 7
Figure B.1 – Example of test recess where a luminaire suitable for covering with
thermal insulating material comprises separate parts . 11
Figure B.2 – Example of test recess where a luminaire not suitable for covering with
thermal insulating material comprises separate parts . 12
Figure B.3 – Correct test box size (insulating ceilings) for settable and adjustable
luminaires . 13
Table 1 – Operating temperature of cable . 8
IEC 60598-2-2:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LUMINAIRES –
Part 2-2: Particular requirements –
Recessed luminaires and recessed air-handling luminaires
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60598-2-2 has been prepared by subcommittee 34D: Luminaires, of IEC technical
committee 34:Lighting. It is an International Standard.
This fourth edition cancels and replaces the third edition published in 2011. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition (there are no major technical changes, see Annex D):
a) The requirements specific to recessed luminaries given in IEC 60598-1 are now
incorporated in this Part 2-2.
b) The requirements for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.