EN 50288-3-2:2001
(Main)Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord cables
Superseded by EN 50288-3-2:2003
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 3-2: Rahmenspezifikation für ungeschirmte Kabel bis 100 MHz - Geräteanschlußkabel und Schaltkabel
Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 3-2: Spécification intermédiaire pour les câbles non blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de brassage
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord cables
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
Multi-element metallic cables used in analogue and digital communication and
control - Part 3-2: Sectional specification for unscreened cables characterized up
to 100 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control --
Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz -
Work area and patch cord cables
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung --
Teil 3-2: Rahmenspezifikation für ungeschirmte Kabel bis 100 MHz -
Geräteanschlußkabel und Schaltkabel
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques -- Partie 3-2: Spécification intermédiaire pour les
câbles non blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de
brassage
Ta slovenski standard je istoveten z: EN 50288-3-2:2001
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50288-3-2
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 33.120.20
English version
Multi-element metallic cables used in analogue and digital
communication and control
Part 3-2: Sectional specification for unscreened cables
characterized up to 100 MHz -
Work area and patch cord cables
Câbles métalliques à éléments multiples Mehradrige metallische Daten- und
utilisés pour les transmissions et les Kontrollkabel für analoge und digitale
commandes analogiques et numériques Übertragung
Partie 3-2: Spécification intermédiaire Teil 3-2: Rahmenspezifikation für
pour les câbles non blindés pour ungeschirmte Kabel bis 100 MHz -
applications jusqu'à 100 MHz - Geräteanschlußkabel und Schaltkabel
Câbles de zone de travail et de brassage
This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-3-2:2001 E
Foreword
This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data
communication cables, of Technical Committee CENELEC TC 46X, Communication cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50288-3-2 on 1999-10-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-09-01
- latest date by which national standards
conflicting with the EN have to be withdrawn (dow) 2002-10-01
This part 3-2 is to be used in conjunction with EN 50288-1.
- 3 - EN 50288-3-2:2001
Contents
1 Scope.4
2 Normative references .4
3 Definitions .4
4 Cable construction .4
4.1 Conductor.4
4.2 Insulation.4
4.3 Cabling elements.5
4.4 Identification of cabling elements .5
4.5 Screening of cabling elements .5
4.6 Cable make-up .5
4.7 Filling compound .5
4.8 Interstitial fillers.5
4.9 Screening of the cable core.5
4.10 Moisture barriers.5
4.11 Wrapping layers .5
4.12 Sheath.5
5 Tests and requirements for completed cables .5
5.1 Electrical tests .6
5.2 Mechanical tests.7
5.3 Environmental tests.7
5.4 Fire performance tests.7
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.