prEN IEC 60598-2-2:2024
(Main)Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling luminaires
Leuchten - Teil 2-2: Besondere Anforderungen - Einbauleuchten und luftführende Einbauleuchten
Luminaires - Partie 2-2: Exigences particulières - Luminaires encastrés et luminaires à circulation d'air encastrés
Svetilke - 2-2. del: Posebne zahteve - Vgradne svetilke in vgradne prezračevalne svetilke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Svetilke - 2-2. del: Posebne zahteve - Vgradne svetilke in vgradne prezračevalne
svetilke
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-
handling luminaires
Leuchten - Teil 2-2: Besondere Anforderungen - Einbauleuchten und luftführende
Einbauleuchten
Luminaires - Partie 2-2: Exigences particulières - Luminaires encastrés et luminaires à
circulation d'air encastrés
Ta slovenski standard je istoveten z: prEN IEC 60598-2-2:2024
ICS:
29.140.40 Svetila Luminaires
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
34D/1744/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60598-2-2 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-10-11 2025-01-03
SUPERSEDES DOCUMENTS:
34D/1734/RR
IEC SC 34D : LUMINAIRES
SECRETARIAT: SECRETARY:
United Kingdom Ms Shanti Conn
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
Safety
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and recessed air-handling
luminaires
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
IEC CDV 60598-2-2 © IEC 2024 2 34D/1744/CDV
1 CONTENTS
3 FOREWORD. 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 General test requirements . 5
8 5 Classification of luminaires . 6
9 6 Marking . 6
10 7 Construction . 7
11 8 External and internal wiring . 7
12 9 Provisions for earthing . 7
13 10 Protection against electric shock . 8
14 11 Resistance to dust, solid objects and moisture . 8
15 12 Insulation resistance and electric strength, touch current and protective conductor
16 current . 8
17 13 Creepage distances and clearances . 8
18 14 Endurance tests and thermal tests . 8
19 15 Resistance to heat, fire and tracking . 9
20 16 Screw terminals . 9
21 17 Screwless terminals and electrical connections . 9
22 Annex A AA (normative) . 10
23 Measurement of ambient temperature in an installation . 10
24 Annex AAB (normative) Recessed luminaires thermal test methods . 11
25 Annex AAC (informative) Explanation of ta with respect to air-handling luminaires . 14
26 Annex AAD (informative) Schedule of amended subclauses containing more
27 serious/critical requirements which require products to be retested . 15
29 Figure 1 – Symbol for luminaires not suitable for direct mounting on normally
30 flammable surfaces (suitable only for mounting on non-combustible surfaces) . 7
31 Figure 2 – Symbol for luminaires not suitable for covering with thermally insulating
32 material . 7
33 Figure AAB.1 – Example of test recess where a luminaire suitable for covering with
34 thermal insulating material comprises separate parts . 11
35 Figure AAB.2 – Example of test recess where a luminaire not suitable for covering with
36 thermal insulating material comprises separate parts . 12
37 Figure AAB.3 – Correct test box size (insulating ceilings) for settable and adjustable
38 luminaires . 13
40 Table 1 – Operating temperature of cable . 9
IEC CDV 60598-2-2 © IEC 2024 3 34D/1744/CDV
43 INTERNATIONAL ELECTROTECHNICAL COMMISSION
44 ____________
46 LUMINAIRES –
48 Part 2-2: Particular requirements –
49 Recessed luminaires and recessed air-handling luminaires
52 FOREWORD
53 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
54 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
55 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
56 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
57 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
58 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
59 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
60 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
61 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
62 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
63 consensus of opinion on the relevant subjects since each technical committee has representation from all
64 interested IEC National Committees.
65 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
66 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
67 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
68 misinterpretation by any end user.
69 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
70 transparently to the maximum extent possible in their national and regional publications. Any divergence between
71 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
72 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
73 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
74 services carried out by independent certification bodies.
75 6) All users should ensure that they have the latest edition of this publication.
76 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
77 members of its technical committees and IEC National Committees for any personal injury, property damage or
78 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
79 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
80 Publications.
81 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
82 indispensable for the correct application of this publication.
83 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
84 patent(s). IEC [takes no position concerning the evidence, validity or applicability of any claimed patent rights in
85 respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
86 may be required to implement this document. However, implementers are cautioned that this may not represent
87 the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
88 shall not be held responsible for identifying any or all such patent rights.
89 IEC 60598-2-2 has been prepared by subcommittee 34D: Luminaires, of IEC technical
90 committee 34: Lighting. It is an International Standard.
91 This fifth edition cancels and replaces the fourth edition published in 2023. This edition
92 constitutes a technical revision.
93 This edition includes the following significant technical changes with respect to the previous
94 edition:
95 a) the clause numbers and structure have been aligned with those of IEC 60598-1
97 The text of this International Standard is based on the following documents:
IEC CDV 60598-2-2 © IEC 2024 4 34D/1744/CDV
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
100 Full information on the voting for its approval can be found in the report on voting indicated in
101 the above table.
102 The language used for the development of this International Standard, Technical is English.
103 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
104 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, and the
105 ISO/IEC Directives, JTC 1 Supplement available at www.iec.ch/members_experts/refdocs. The
106 main document types developed by IEC are described in greater detail at
107 www.iec.ch/publications.
108 This Part 2-2 is to be used in conjunction with the latest edition of IEC 60598-1 and its amendment(s).
109 It was established on the basis of the tenth edition (20XX) of that standard.
111 NOTE When “Part 1” is mentioned in this document, it refers to IEC 60598-1.
113 Where this document states "addition", "modification" or "replacement", the relevant text of Part 1 is to
114 be adapted accordingly.
116 Subclauses, notes, figures and tables additional to those in Part 1 are numbered starting from 101;
117 supplementary annexes are entitled AAA, AAB, etc.
119 A list of all parts in the IEC 60598 series, published under the general title Luminaires can be found
120 on the IEC website.
122 The committee has decided that the contents of this document will remain unchanged until the
123 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
124 specific document. At this date, the document will be
125 • reconfirmed,
126 • withdrawn,
127 • replaced by a revised edition, or
128 • amended.
IEC CDV 60598-2-2 © IEC 2024 5 34D/1744/CDV
132 LUMINAIRES –
134 Part 2-2: Particular requirements –
135 Recessed luminaires and recessed air-handling luminaires
137 1 Scope
138 This part of IEC 60598 specifies requirements for recessed luminaires and recessed air-
139 handling luminaires for use within ventilation ducts or ventilated spaces. These luminaires are
140 for use with electric light sources and with supply voltages up to 1 000 V.
141 NOTE The expressions "ventilation" and "ventilated" in this document refer to forced ventilation.
142 2 Normative references
143 This clause of Part 1 applies with the following additions::
144 IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including
145 450/750 V
146 IEC 60245 (all parts), Rubber insulated cables – Rated voltages up to and including 450/750 V
147 3 Terms and definitions
148 For the purposes of this document, the terms and definitions given in Part 1 applies with the
149 following
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.