EN 61076-2-106:2011

Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

IEC 61076-2-106:2011 describes circular connectors with IP40 or IP65/67 protection degree, typically used for industrial process measurement and control. These connectors consist of fixed and free connectors, either rewireable or non-rewireable, with M16 x 0,75 screw-locking. Male connectors have round contacts Ø 1,5 mm or Ø 1,0 mm.

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 2-106: Rundsteckverbinder - Bauartspezifikation für Steckverbinder M16 x 0,75 mit Schraubverriegelung und Schutzart IP40 oder IP65/67

Connecteurs pour équipements électroniques - Exigences de produits - Partie 2-106: Connecteurs circulaires - Spécification particulière pour les connecteurs M 16 x 0,75 à vis de degré de protection IP40 ou IP65/67

La CEI 61076-2-106:2011 décrit les connecteurs circulaires qui possèdent un degré de protection IP40 ou IP65/67, généralement utilisés dans le domaine des mesures et commandes des processus industriels. Ces connecteurs se composent d'embases et de fiches, pouvant être recâblées ou non, à vis M16 x 0,75. Les connecteurs mâles possèdent des contacts ronds de Ø 1,5 mm ou Ø 1,0 mm.

Konektorji za elektronsko opremo - Zahteve za izdelek - 2-106. del: Okrogli konektorji - Podrobna specifikacija za konektorje m 16 x 0,75 z vijačno zaporo in zaščitno stopnjo ip40 ali ip65/67

Ta mednarodni standard opisuje okrogle konektorje z zaščitno stopnjo IP40 ali IP65/67, ki se praviloma uporabljajo za merjenje in nadzor pri industrijskem postopku. Ti konektorji so sestavljeni iz fiksnih in prostih konektorjev, bodisi za večkratno priključitev ali ne, z vijačno zaporo M16 x 0,75. Moški konektorji imajo okrogle kontakte 1,5-mm ali 1,0-mm.

General Information

• Status: Published
• Publication Date: 21-Aug-2011
• Withdrawal Date: 25-Jul-2014
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Aug-2011
• Completion Date: 22-Aug-2011
• Ref Project: SIST EN 61076-2-106:2011 - Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors m 16 x 0,75 with screw-locking and degree of protection ip40 or ip65/67

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61076-2-106:2011
01-oktober-2011
.RQHNWRUML]DHOHNWURQVNRRSUHPR=DKWHYH]DL]GHOHNGHO2NURJOL
NRQHNWRUML3RGUREQDVSHFLILNDFLMD]DNRQHNWRUMHP[]YLMDþQR]DSRURLQ
]DãþLWQRVWRSQMRLSDOLLS
Connectors for electronic equipment - Product requirements - Part 2-106: Circular
connectors - Detail specification for connectors m 16 x 0,75 with screw-locking and
degree of protection ip40 or ip65/67
Connecteurs pour équipements électroniques - Exigences relatives aux produits - Partie
2-106: Connecteurs circulaires - Spécification particulière pour les connecteurs m 16 x
0,75 à vis de degré de protection ip40 ou ip65/67
Ta slovenski standard je istoveten z: EN 61076-2-106:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 61076-2-106:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61076-2-106:2011

---------------------- Page: 2 ----------------------

SIST EN 61076-2-106:2011

EUROPEAN STANDARD
EN 61076-2-106

NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM

ICS 13.220.10

English version


Connectors for electronic equipment -
Product requirements -
Part 2-106: Circular connectors -
Detail specification for connectors M 16 x 0,75 with screw-locking and
degree of protection IP40 or IP65/67
(IEC 61076-2-106:2011)

Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produits - Produktanforderungen -
Partie 2-106: Connecteurs circulaires - Teil 2-106: Rundsteckverbinder -
Spécification particulière pour les Bauartspezifikation für Steckverbinder
connecteurs M 16 x 0,75 à vis de degré M16 x 0,75 mit Schraubverriegelung und
de protection IP40 ou IP65/67 Schutzart IP40 oder IP65/67
(CEI 61076-2-106:2011) (IEC 61076-2-106:2011)




This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-2-106:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61076-2-106:2011
EN 61076-2-106:2011 - 2 -
Foreword
The text of document (48B/2239/FDIS), future edition 1 of IEC 61076-2-106, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-2-106 on 2011-07-26.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-26
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-07-26
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-2-106:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60130-9 NOTE  Harmonized as EN 60130-9.
__________

---------------------- Page: 4 ----------------------

SIST EN 61076-2-106:2011
- 3 - EN 61076-2-106:2011
Annex ZA
(normative)

Normative references to international public
...