EN 60439-3:1991/A2:2001

Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

Initially handled by CLC/TC 17D (dormant) * Superseded by EN 61439-3:2012

Niederspannung-Schaltgerätekombinationen - Teil 3: Besondere Anforderungen an Niederspannung-Schaltgerätekombinationen zu deren Bedienung Laien Zutritt haben - Installationsverteiler

Ensembles d'appareillage à basse tension - Partie 3: Règles particulières pour ensembles d'appareillage à basse tension destinés à être installés en des lieux accessibles à des personnes non qualifiées pendant leur utilisation - Tableaux de répartition

Sestavi nizkonapetostnih stikalnih in krmilnih naprav – 3. del: Posebne zahteve za sestave nizkonapetostnih stikalnih naprav, predvidene za vgraditev na mestih, do katerih imajo dostop nestrokovne osebe – Razdelilniki – Dopolnilo A2

General Information

• Status: Withdrawn
• Publication Date: 07-Jun-2001
• Withdrawal Date: 30-Apr-2004
• ICS: 29.130.20 - Low voltage switchgear and controlgear
• Technical Committee: CLC/SR 121B - Low-voltage switchgear and controlgear assemblies
• Drafting Committee: IEC/SC 17D - IEC_SC_17D
• Parallel Committee: IEC/SC 17D - IEC_SC_17D
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Mar-2015
• Completion Date: 22-Mar-2015
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60439-3:1998/A2:2002 - Low-voltage switchgear and controlgear assemblies -- Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

Relations

• Replaced By: EN 61439-3:2012 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
• Effective Date: 29-Jan-2023
• Amends: EN 60439-3:1991 - Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60439-3:1998/A2:2002
prva izdaja
STANDARD
februar 2002
Sestavi nizkonapetostnih stikalnih in krmilnih naprav – 3. del: Posebne
zahteve za sestave nizkonapetostnih stikalnih naprav, predvidene za
vgraditev na mestih, do katerih imajo dostop nestrokovne osebe –
Razdelilniki – Dopolnilo A2
Low-voltage switchgear and controlgear assemblies - Part 3: Particular
requirements for low-voltage switchgear and controlgear assemblies intended to be
installed in places where unskilled persons have access for their use - Distribution
boards
ICS 29.130.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60439-3/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2001
ICS 29.130.20
English version
Low-voltage switchgear and controlgear assemblies
Part 3: Particular requirements for low-voltage switchgear and
controlgear assemblies intended to be installed in places
where unskilled persons have access for their use -
Distribution boards
(IEC 60439-3:1990/A2:2001)
Ensembles d'appareillage à basse tension Niederspannung-
Partie 3: Règles particulières pour Schaltgerätekombinationen
ensembles d'appareillage à basse tension Teil 3: Besondere Anforderungen an
destinés à être installés en des lieux Niederspannung-
accessibles à des personnes non Schaltgerätekombinationen zu deren
qualifiées pendant leur utilisation - Bedienung Laien Zutritt haben -
Tableaux de répartition Installationsverteiler
(CEI 60439-3:1990/A2:2001) (IEC 60439-3:1990/A2:2001)
This amendment A2 modifies the European Standard EN 60439-3:1991; it was approved by CENELEC
on 2001-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60439-3:1991/A2:2001 E

Foreword
The text of document 17D/239/FDIS, future amendment 2 to IEC 60439-3:1990, prepared by SC 17D,
Low-voltage switchgear and controlgear assemblies, of IEC TC 17, Switchgear and controlgear, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to
EN 60439-3:1991 on 2001-05-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2004-05-01
__________
Endorsement notice
The text of amendment 2:2001 to the International Standard IEC 60439-3:1990 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
60439-3
INTERNATIONAL
STANDARD
AMENDEMENT 2
AMENDMENT 2
2001-02
Amendement 2
Ensembles d'appareillage à basse tension –
Partie 3:
Règles particulières pour ensembles
d'appareillage BT destinés à être installés
en des lieux accessibles à des personnes
non qualifiées pendant leur utilisation –
Tableaux de répartition
Amendment 2
Low-voltage switchgear and controlgear
assemblies –
Part 3:
Particular requirements for low-voltage switchgear
and controlgear assemblies intended to be
installed in places where unskilled persons have
access for their use – Distribution boards
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
G
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60439-3 amend. 2  IEC:2001 – 3 –
FOREWORD
This amendment has been prepared by subcommittee 17D: Low-voltage switchgear and
controlgear assemblies, of IEC technical committee 17: Switchgear and controlgear.
The text of this amendment is based on the following documents:
FDIS Report on voting
17D/239/FDIS 17D/243/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2004. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
___________
INTRODUCTION
The clauses of the document supplement, modify or replace the corresponding clauses in
IEC 60439-3 – First edition (1990): Low voltage switchgear and controlgear assemblies – Part 3:
Particular requirements for low-voltage switchgear and controlgear assemblies intended to be
installed in places where unskilled persons have access for their use – Distribution boards.
Where there is no corresponding clause or subclause in this amendment, the clause or
subclause of IEC 60439-3:1990 applies without modifications.
Page 5
FOREWORD
Replace, in the ultimate and penultimate paragraphs of page 5, the reference “IEC 439-1
(1985)” by “IEC 60439-1 (1999)”.
Replace, in the penultimate paragraph of page 5, the title of Part 1 by the following correct title:
Part 1: Type-tested and partially type-tested assemblies.
Page 9
2 Definitions
Renumber subclause "2.1.10" as "2.1.12".
Page 11
2.4 Definitions concerning the structural parts of assemblies
Renumber subclause "2.4.15" as "2.4.18".

60439-3 amend. 2  IEC:2001 – 5 –
Page 13
3 Classification of assemblies
Add to the list of deletions:
– the form of internal separation (see 7.7);
– the types of electrical connections of functional units (see 7.11).
4.8 Rated diversity factor
Renumber subclause "4.8" as "4.7".
Delete the last line.
Page 15
5.1 Nameplates
Replace “Information specified under items a), b), c), d), e), l) and r)” by “Informatio
...