EN 50363-3:2005/A1:2011
(Amendment)Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds
2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard).
2021: CLC legacy converted by DCLab NISOSTS
Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen - Teil 3: PVC-Isoliermischungen
Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 3: Mélanges PVC pour enveloppe isolante
Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 3. del: Polivinilkloridne (PVC) mase za izoliranje - Dopolnilo A1
Ta del EN 50363 določa zahteve za fizikalne lastnosti polivinilkloridnih mas za izoliranje, ki so podane v preglednici 1. Ustrezne preskusne metode so navedene v seriji EN 60811 in EN 50395. OPOMBA: Ta del ISO 50363 se mora brati v povezavi z EN 50363-0.
General Information
Relations
Overview - EN 50363-3:2005/A1:2011 (PVC insulating compounds)
EN 50363-3:2005/A1:2011 is the CENELEC European standard that specifies requirements for PVC insulating compounds used in low voltage energy cables. Amendment A1 (approved 14 March 2011) updates the 2005 edition and was adopted by national electrotechnical committees across Europe. The document defines material criteria, required testing and acceptance practices for PVC compounds intended for cable insulation and supports consistent material quality in cable manufacture and testing. Note: in later administrative updates the standard is kept as a supporting standard (link to 2014/35/EU removed) and the CLC legacy was converted in 2021.
Key topics and technical requirements
- Scope and applicability: Requirements specifically for PVC insulating compounds used on low-voltage energy cables (part of the EN 50363 series addressing insulating, sheathing and covering materials).
- Material definition and characteristics: Describes the function and expected properties of PVC compounds intended for insulation (electrical and physical performance expectations).
- Testing and conformity: Sets out test methods and acceptance criteria that manufacturers and test laboratories should use to verify compound performance and consistency.
- Amendment notes: Amendment A1 modifies the original 2005 text; one explicit change noted in the amendment is the deletion of the “Insulation resistance test” from Table 2 (product standard calls up necessary IR requirements).
- Regulatory status: CENELEC members are required to implement the amendment as national standards; bibliographic and national implementation details are maintained by CENELEC.
Practical applications and who uses this standard
- Cable manufacturers: Specify and verify PVC insulating compounds for production of low-voltage energy cables to ensure consistent electrical and mechanical performance.
- Material suppliers: Certify formulated PVC compounds meet European requirements for insulation use and support customer compliance.
- Testing laboratories and QA teams: Apply prescribed test methods to demonstrate conformity and support product certification.
- Design engineers and procurement: Reference the standard when selecting insulating materials for cable specification, procurement, and product datasheets.
- Regulators and conformity assessors: Use the standard as a technical reference for compliance and market surveillance.
Related standards and references
- Part of the EN 50363 series covering insulating, sheathing and covering materials for low-voltage energy cables (other parts address sheathing and coverings).
- Managed and published by CENELEC (European Committee for Electrotechnical Standardization).
Keywords: EN 50363-3:2005/A1:2011, PVC insulating compounds, low voltage energy cables, CENELEC, insulation materials, cable standards, material testing, cable manufacturers.
Frequently Asked Questions
EN 50363-3:2005/A1:2011 is a amendment published by CLC. Its full title is "Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds". This standard covers: 2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard). 2021: CLC legacy converted by DCLab NISOSTS
2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard). 2021: CLC legacy converted by DCLab NISOSTS
EN 50363-3:2005/A1:2011 is classified under the following ICS (International Classification for Standards) categories: 29.035.20 - Plastics and rubber insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 50363-3:2005/A1:2011 has the following relationships with other standards: It is inter standard links to EN 50363-3:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 50363-3:2005/A1:2011 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 50363-3:2005/A1:2011 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2011
0DWHULDOL]DL]ROLUDQMHRSODãþHQMHLQSUHYOHNHQL]NRQDSHWRVWQLKHQHUJHWVNLKNDEORY
GHO 3ROLYLQLONORULGQH 39& PDVH]DL]ROLUDQMH'RSROQLOR$
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC
insulating compounds
Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -
Teil 3: PVC-Isoliermischungen
Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie
basse tension - Partie 3: Mélanges PVC pour enveloppe isolante
Ta slovenski standard je istoveten z: EN 50363-3:2005/A1:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 50363-3/A1
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.035.20
English version
Insulating, sheathing and covering materials for low voltage energy
cables -
Part 3: PVC insulating compounds
Matériaux pour enveloppe isolante, Isolier-, Mantel- und
gainage et revêtement pour les câbles Umhüllungswerkstoffe für
d'énergie basse tension - Niederspannungskabel und -leitungen -
Partie 3: Mélanges PVC pour enveloppe Teil 3: PVC-Isoliermischungen
isolante
This amendment A1 modifies the European Standard EN 50363-3:2005; it was approved by CENELEC on
2011-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...