iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 165000-3:1996

(Main)

Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers

Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers

This checklist is intended for the use of a hybrid microcircuit manufacturer's internal assessment team. It will provide the hybrid manufacturer and the ONS with ongoing information on process control demonstrating compliance with EN 165000-1. It is not intended to include Quality System requirements.

Integrierte Hybrid- und Schichtschaltungen - Teil 3: Selbst-Auditierungs Checkliste und Bericht für Hersteller von Integrierten Schicht- und Hybridschaltungen

Circuits intégrés à couches et hybrides - Partie 3 : Liste d'auto-vérification et rapport pour les fabricants de circuits intégrés à couches et hybrides

La présente liste de contrôle est destinée à l'usage de l'équipe d'évaluation interne du fabricant d'un micro-circuit hybride. Elle fournit au fabricant du circuit hybride et à l'ONS les informations permanentes portant sur la maîtrise de processus et démontrant la conformité avec l’EN 165000-1. Il n'est pas prévu qu'elle comprenne les exigences concernant le système qualité.

Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuits manufacturers

General Information

Status
Withdrawn
Publication Date
16-Apr-1996
Withdrawal Date
28-Feb-1997
ICS
31.200 - Integrated circuits. Microelectronics
Technical Committee
CLC/SR 47A - Integrated circuits
Drafting Committee
IEC/SC 47A - IEC_SC_47A
Parallel Committee
IEC/SC 47A - IEC_SC_47A
Current Stage
Ref Project
SIST EN 165000-3:2002 - Film and hybrid integrated circuits -- Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers

Buy Standard

EN 165000-3:2002EN 165000-3:2002
PreviousNext
Standard
EN 165000-3:2002
English language
98 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuits manufacturersIntegrierte Hybrid- und Schichtschaltungen -- Teil 3: Selbst-Auditierungs Checkliste und Bericht für Hersteller von Integrierten Schicht- und HybridschaltungenFilm and hybrid integrated circuits -- Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers31.200Integrirana vezja, mikroelektronikaIntegrated circuits. MicroelectronicsICS:Ta slovenski standard je istoveten z:EN 165000-3:1996SIST EN 165000-3:2002en01-september-2002SIST EN 165000-3:2002SLOVENSKI
STANDARD



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 165000-3:2002



SIST EN 1650
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62228-3:2019/AC:2023-07(Corrigendum)
Integrated circuits - EMC evaluation of transceivers - Part 3: CAN transceivers
SIST EN IEC 62228-3:2019/AC:2023
  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61967-8:2023(Main)
Integrated circuits - Measurement of electromagnetic emissions - Part 8: Measurement of radiated emissions - IC stripline method
SIST EN IEC 61967-8:2023

IEC 61967-8:2023 is available as IEC 61967-8:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61967-8:2023 defines a method for measuring the electromagnetic radiated emission from an integrated circuit (IC) using an IC stripline. The IC being evaluated is mounted on an EMC test board (PCB) between the active conductor and the ground plane of the IC stripline arrangement. This edition includes the following significant technical changes with respect to the previous edition: a) frequency range of 150 kHz to 3 GHz was deleted from the scope; b) extension of upper usable frequency to 6 GHz or higher as long as the defined requirements are fulfilled.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62228-6:2022(Main)
Integrated circuit - EMC evaluation of transceivers - Part 6: PSI5 transceivers
SIST EN IEC 62228-6:2023

This document specifies test and measurement methods for EMC evaluation of Peripheral Sensor Interface 5 (PSI5) transceiver integrated circuits (ICs) under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. It is applicable for PSI5 satellite ICs (e.g. sensors) and ICs with embedded PSI5 transceivers (e.g. PSI5 Electronic control unit IC). The document covers - the emission of RF disturbances, - the immunity against RF disturbances, - the immunity against impulses and - the immunity against electrostatic discharges (ESD).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62228-7:2022(Main)
Integrated circuits - EMC evaluation of transceivers - Part 7: CXPI transceivers
SIST EN IEC 62228-7:2022

This part of IEC 62228 specifies test and measurement methods for the EMC evaluation of CXPI transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. This specification is applicable for standard CXPI transceiver ICs and ICs with embedded CXPI transceiver and covers - the emission of RF disturbances, - the immunity against RF disturbances, - the immunity against impulses and - the immunity against electrostatic discharges (ESD).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62228-5:2021(Main)
Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet transceivers
SIST EN IEC 62228-5:2021

IEC 62228-5:2021(E) specifies test and measurement methods for EMC evaluation of Ethernet transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. It is applicable for transceiver of the Ethernet systems  
100BASE-T1 according to ISO/IEC/IEEE 8802-3/AMD1;
100BASE-TX according to ISO/IEC/IEEE 8802-3;
1000BASE-T1 according to ISO/IEC/IEEE 8802-3/AMD4  and covers  
the emission of RF disturbances;
the immunity against RF disturbances;
the immunity against impulses;
the immunity against electrostatic discharges (ESD).

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61967-4:2021(Main)
Integrated circuits - Measurement of electromagnetic emissions - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method
SIST EN IEC 61967-4:2021

IEC 61967-4:2021 is available as IEC 61967-4:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61967-4:2021 specifies a method to measure the conducted electromagnetic emission (EME) of integrated circuits by direct radio frequency (RF) current measurement with a 1 Ω resistive probe and RF voltage measurement using a 150 Ω coupling network. These methods ensure a high degree of reproducibility and correlation of EME measurement results. This edition includes the following significant technical changes with respect to the previous edition: - frequency range of 150 kHz to 1 GHz has been deleted from the title; - recommended frequency range for 1 Ω method has been reduced to 30 MHz; - Annex G with recommendations and guidelines for frequency range extension beyond 1 GHz has been added.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62433-6:2020(Main)
EMC IC modelling - Part 6: Models of integrated circuits for pulse immunity behavioural simulation - Conducted pulse immunity modelling (ICIM-CPI)
SIST EN IEC 62433-6:2021

IEC 62433-6:2020 describes the extraction flow for deriving an immunity macro-model of an Integrated Circuit (IC) against conducted Electrostatic Discharge (ESD) according to IEC 61000-4-2 and Electrical Fast Transients (EFT) according to IEC 61000-4-4. The model addresses physical damages due to overvoltage, thermal damage and other failure modes. Functional failures can also be addressed. This model allows the immunity simulation of the IC in an application. This model is commonly called "Integrated Circuit Immunity Model Conducted Pulse Immunity", ICIM-CPI. This document provides: - the description of ICIM-CPI macro-model elements representing electrical, thermal or logical behaviour of the IC. - a universal data exchange format based on XML.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62433-1:2019/AC:2020-07(Corrigendum)
EMC IC modelling - Part 1: General modelling framework
SIST EN IEC 62433-1:2019/AC:2020

TAN - // IEC Corrigendum

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62228-3:2019(Main)
Integrated circuits - EMC evaluation of transceivers - Part 3: CAN transceivers
SIST EN IEC 62228-3:2019

This part of IEC 62228 specifies test and measurement methods for EMC evaluation of CAN transceiver ICs under network condition. It defines test configurations, test conditions, test signals, failure criteria, test procedures, test setups and test boards. It is applicable for CAN standard transceivers, CAN transceivers with partial networking functionality and CAN transceivers with flexible data rate capability and covers - the emission of RF disturbances, - the immunity against RF disturbances, - the immunity against impulses, and - the immunity against electrostatic discharges (ESD).

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62433-1:2019(Main)
EMC IC modelling - Part 1: General modelling framework
SIST EN IEC 62433-1:2019

IEC 62433-1:2019(E) specifies the framework and methodology for EMC IC macro-modelling. Terms that are commonly used in IEC 62433 (all parts), different modelling approaches, requirements and data-exchange format for each model category that is standardized in this series are defined in this document. IEC 62433-1 cancels and replaces IEC TS 62433-1 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TS 62433 1:2011: Incorporation of a data exchange format for an integrated circuit’s model representation.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day