EN 62403:2006

High density recording format on CD-R/RW disc system - HD-BURN format

Specifies the HD-BURN format applied to CD-R/RW discs. The HD-BURN system is capable of recording the information in double density compared to the conventional CD-R/RW disc. It enables the realization of products with high reliability, high speed and interchangeability, and is especially suitable for consumer applications with high cost-performance.

Aufzeichnungsformat hoher Dichte für CD-R/RW-Systeme - HD-BURN-Format

Format d'enregistrement à haute densité sur un système à disque CD-R/RW - Format HD-BURN

Specifies the HD-BURN format applied to CD-R/RW discs. The HD-BURN system is capable of recording the information in double density compared to the conventional CD-R/RW disc. It enables the realization of products with high reliability, high speed and interchangeability, and is especially suitable for consumer applications with high cost-performance.

Format z visoko gostoto zapisa na zapisovalni sistem CD-R/RW – Format HD-BURN (IEC 62403:2005)

General Information

• Status: Published
• Publication Date: 20-Apr-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 35.220.30 - Optical storage devices
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Parallel Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Apr-2006
• Completion Date: 21-Apr-2006
• Ref Project: SIST EN 62403:2006 - High density recording format on CD-R/RW disc system - HD-BURN format

Standards Content (Sample)

SLOVENSKI SIST EN 62403:2006
STANDARD
oct 2006
Format z visoko gostoto zapisa na diskovni zapisovalni sistem CD-R/RW –
Format HD-BURN
High density recording format on CD-R/RW disc system - HD-BURN format
ICS 33.160.30; 35.220.30 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD
EN 62403
NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM
ICS 35.220.30
English version
High density recording format on CD-R/RW disc system -
HD-BURN format
(IEC 62403:2005)
Format d'enregistrement à haute densité Aufzeichnungsformat hoher Dichte
sur un système à disque CD-R/RW - für CD-R/RW-Systeme -
Format HD-BURN HD-BURN-Format
(CEI 62403:2005) (IEC 62403:2005)

This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62403:2006 E
Foreword
The text of the International Standard IEC 62403:2005, prepared by technical area 7: Moderate data
rate storage media, equipment and systems of IEC TC 100, Audio, video and multimedia systems and
equipment, was submitted to the formal vote and was approved by CENELEC as EN 62403 on
2006-02-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of patents.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent
right.
The holder of this patent right has assured the IEC that he is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
Sanyo Electric Co., Ltd.
5-5 Keihan-hondori 2-chome Moriguchi City, Osaka, 570-8677, Japan
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. IEC and CENELEC shall not be held responsible for
identifying any or all such patent rights.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62403:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62403:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60908 - Audio recording - Compact disc digital EN 60908 1999
audio system
ISO/IEC 16448 2002 Information technology - 120 mm DVD - - -
Read-only disk
1)
ISO/IEC 20563 - Information technology - 80 mm - -
(1,23 Gbytes per side) and 120 mm
(3,95 Gbytes per side) DVD-recordable
disk (DVD-R)
IEC/TR 62291 2002 Multimedia data storage - Application - -
program interface for UDF based file
systems
ISO 9660 1988 Information processing - Volume and file - -
structure of CD-ROM for information
interchange
ISO/IEC 13346-1 1995 Information technology - Volume and file - -
structure of write-once and rewritable
media using non-sequential recording for
information interchange
Part 1: General
The Sony/Philips 1999 Compact disk digital audio system - -
Red Book description
1)
The Sony/Philips - Recordable compact disk system - Part 2: - -
Orange Book CD-R
1)
The Sony/Philips - Recordable compact disk system - Part 3: - -
Orange Book CD-RW
1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 62403
First edition
2005-06
High density recording format on CD-R/RW disc
systems – HD-BURN format
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 62403  IEC:2005(E)
CONTENTS
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 Convention and notations .8
4.1 Representation of numbers .8
4.2 Names.9
5 List of acronyms .9
6 General requirements .10
6.1 Environment .10
6.2 Unrecorded disc .11
6.3 Recorded disc .11
7 Mechanical and physical characteristics .11
7.1 Mechanical parameters .11
7.2 Optical parameters .11
7.3 Recording parameters .11
8 Disc format.11
8.1 Track format.11
8.2 Data frame format .13
8.3 ECC block format .13
8.4 Recording frames .13
8.5 Physical sectors .13
8.6 Sector number.13
8.7 Format of the inner area.13
8.8 Format of the user data area .22
8.9 Format of the lead-out area .22
9 File system.22

Annex A (normative) A standard disc .23
Annex B (normative) ATIP synchronization rule .29
Annex C (normative) General linking rules (ATIP) .30

Figure 1 – Track layout .12
Figure 2 – Sector structure .12
Figure 3 – PCA structure .13
Figure 4 – Lead-in (PMD) data structure .14
Figure 5 – Multi-session structure .14
Figure 6 – Lead-in (PMD) data structure .15
Figure A.1 – Read only optical pick up .23
Figure A.2 – Recorder optical pick up .24
Figure A.3 – Modulation amplitude and signal asymmetry .26
Figure A.4 – General system diagram for jitter measurement .26
Figure A.5 – Write strategy pulse .27
Figure A.6 – Write strategy pulse for CD-RW disc.28

62403  IEC:2005(E) – 3 –
Figure B.1 – ATIP synchronization rule .29
Figure C.1 – Write start for general linking rules (ATIP) .30
Figure C.2 – Write stop for general linking rules (ATIP) .30

Table 1 – PMA padding data format .14
Table 2 – TPMA structure-1 .15
Table 3 – TPMA structure-2 .15
Table 4 – TPMA structure-3 .16
Table 5 – Initial data of PMD lead-in of disc information.16
Table 6 – Write type.17
Table 7 – Link size.17
Table 8 – PMD-1.18
Table 9 – PMD-1 item detail.19
Table 10 – PMD lead-in start address .19
Table 11 – Media information.20
Table 12 – Point field.20
Table 13 – PMD-2.20
Table 14 – PMD-3.21
Table 15 – PMD-4.21
Table 16 – PSI.21
Table 17 – PMD lead-in start address .22
Table 18 – Media information.22

– 4 – 62403  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH DENSITY RECORDING FORMA
...