EN 61347-2-3:2011/A1:2017

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

IEC 61347-2-3:2011 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. This second edition cancels and replaces the first edition published in 2000, its Amendment 1 (2004) and its Amendment 2 (2006), IEC 61347-2-4 published in 2000, IEC 61347-2-5 published in 2000 and IEC 61347-2-6 published in 2000. This second edition constitutes a technical revision. The significant revisions with respect to the first edition are: - rectifying test conditions when dimming; - construction requirements; - measurement circuits and limits for HF leakage currents; - modification of the structure to become a standard exclusively for a.c. and d.c. central supplied electronic control gear for general lighting and Annex J cover centrally- supplied emergency control gear. This publication is to be read in conjunction with IEC 61347-1:2007. The contents of the corrigendum of September 2011 have been included in this copy.

Geräte für Lampen - Teil 2-3: Besondere Anforderungen an wechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für Leuchtstofflampen

Appareillages de lampes - Partie 2-3: Exigences particulières pour les appareillages électroniques alimentés en courant alternatif et/ou en courant continu pour lampes fluorescentes

Krmilne stikalne naprave za sijalke - 2-3. del: Posebne zahteve za izmenično napajane elektronske predstikalne naprave za fluorescenčne sijalke - Dopolnilo A1 (IEC 61347-2-3:2011/A1:2016)

General Information

• Status: Published
• Publication Date: 27-Apr-2017
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Apr-2017
• Completion Date: 28-Apr-2017
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: SIST EN 61347-2-3:2011/A1:2017 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011/A1:2016)

Relations

• Amends: EN 61347-2-3:2011 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
• Effective Date: 14-Apr-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2017
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO3RVHEQH]DKWHYH]DL]PHQLþQR
QDSDMDQHHOHNWURQVNHSUHGVWLNDOQHQDSUDYH]DIOXRUHVFHQþQHVLMDONH'RSROQLOR$
,(&$
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent lamps (IEC 61347-2-3:2011/A1:2016)
Ta slovenski standard je istoveten z: EN 61347-2-3:2011/A1:2017
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61347-2-3:2011/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 29.140.99
English Version
Lamp control gear - Part 2-3: Particular requirements for a.c.
and/or d.c. supplied electronic control gear for fluorescent lamps
(IEC 61347-2-3:2011/A1:2016)
Appareillages de lampes - Partie 2-3: Exigences Geräte für Lampen - Teil 2-3: Besondere Anforderungen an
particulières pour les appareillages électroniques alimentés wechsel- und/oder gleichstromversorgte elektronische
en courant alternatif et/ou en courant continu pour lampes Betriebsgeräte für Leuchtstofflampen
fluorescentes (IEC 61347-2-3:2011/A1:2016)
(IEC 61347-2-3:2011/A1:2016)
This amendment A1 modifies the European Standard EN 61347-2-3:2011; it was approved by CENELEC on 2016-08-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61347-2-3:2011/A1:2017 E

European foreword
The text of document 34C/1206/FDIS, future IEC 61347-2-3:2011/A1, prepared by SC 34C "Auxiliaries
for lamps", of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 61347-2-3:2011/A1:2017.
The following dates are fixed:
(dop) 2017-10-28
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-04-28
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61347-2-3:2011/A1:2016 was approved by CENELEC as a
European Standard without any modification.
IEC 61347-2-3 ®
Edition 2.0 2016-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Lamp control gear –
Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control

gear for fluorescent lamps
Appareillages de lampes –
Partie 2-3: Exigences particulières pour les appareillages électroniques

alimentés en courant alternatif et/ou en courant continu pour lampes

fluorescentes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-3519-5
...