EN 61347-2-3:2011
(Main)Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-3:2011 specifies particular safety requirements for electronic control gear for use on a.c. and d.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation. This second edition cancels and replaces the first edition published in 2000, its Amendment 1 (2004) and its Amendment 2 (2006), IEC 61347-2-4 published in 2000, IEC 61347-2-5 published in 2000 and IEC 61347-2-6 published in 2000. This second edition constitutes a technical revision. The significant revisions with respect to the first edition are: - rectifying test conditions when dimming; - construction requirements; - measurement circuits and limits for HF leakage currents; - modification of the structure to become a standard exclusively for a.c. and d.c. central supplied electronic control gear for general lighting and Annex J cover centrally- supplied emergency control gear. This publication is to be read in conjunction with IEC 61347-1:2007. The contents of the corrigendum of September 2011 have been included in this copy.
Geräte für Lampen - Teil 2-3: Besondere Anforderungen an wechsel- und/oder gleichstromversorgte elektronische Betriebsgeräte für Leuchtstofflampen
Appareillages de lampes - Partie 2-3: Exigences particulières pour les appareillages électroniques alimentés en courant alternatif et/ou en courant continu pour lampes fluorescentes
La CEI 61347-2-3:2011 spécifie les exigences particulières de sécurité applicables aux appareillages électroniques pour utilisation en courant alternatif et en courant continu jusqu'à 1 000 V à 50 Hz ou 60 Hz, avec des fréquences de fonctionnement différentes de la fréquence du réseau d'alimentation, associés aux lampes fluorescentes spécifiées dans la CEI 60081 et la CEI 60901, et à d'autres lampes fluorescentes fonctionnant à haute fréquence. Cette deuxième édition annule et remplace la première édition parue en 2000, son Amendement 1 (2004) et son Amendement 2 (2006), ainsi que la CEI 60925 parue en 1989, son Amendement 1 (1996) et son Amendement 2 (2001), la CEI 61347-2-4 parue en 2000, la CEI 61347-2-5 parue en 2000 et la CEI 61347-2-6 parue en 2000. Elle constitue une révision technique. Les révisions significatives par rapport à la première édition sont les suivantes: - rectification des conditions d'essai lors de variations; - exigences de construction; - circuits de mesure et limites pour les courants de fuite HF; - modification de la structure de la norme, pour qu'elle traite exclusivement des appareillages électroniques à alimentation centrale en courant alternatif et en courant continu pour l'éclairage général, et pour que l'Annexe J traite des appareillages de secours à alimentation centrale. Cette publication doit être lue conjointement avec la .> Le contenu du corrigendum de septembre 2011 a été pris en considération dans cet exemplaire.
Krmilne stikalne naprave za sijalke - 2-3. del: Posebne zahteve za izmenično napajane elektronske predstikalne naprave za fluorescenčne sijalke
Ta del IEC 61347 določa posebne varnostne zahteve za elektronske predstikalne naprave z izmeničnim in enosmernim napajanjem, manjšim od 1000 V, in pri 50 Hz ali 60 Hz s frekvencami delovanja, ki odstopajo od napajalne frekvence, povezanimi s fluorescenčnimi sijalkami, kot je določeno v IEC 60081 in IEC 60901, in z drugimi fluorescenčnimi sijalkami za visokofrekvenčno delovanje. Zahteve za zmogljivost so predmet IEC 60929. Določene zahteve za elektronske predstikalne naprave s sredstvi zaščite pred pregrevanjem so podane v dodatku C. V dodatku J so podane nekatere zahteve za elektronske predstikalne naprave, ki pri zasilni razsvetljavi delujejo iz osrednjega napajanja. Zahteve za zmogljivost, primerne za varno delovanje zasilne razsvetljave, so prav tako zajete v dodatku J. Zahteve za elektronske predstikalne naprave, ki pri zasilni razsvetljavi delujejo iz neosrednjega napajanja, so podane v IEC 61347-2-7.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN 60925:1995
SIST EN 61347-2-4:2002
SIST EN 61347-2-5:2002
SIST EN 61347-2-6:2002
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO 3RVHEQH]DKWHYH]DL]PHQLþQR
QDSDMDQHHOHNWURQVNHSUHGVWLNDOQHQDSUDYH]DIOXRUHVFHQþQHVLMDONH
Lamp controlgear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent lamps
Geräte für Lampen - Teil 2-3: Besondere Anforderungen an wechsel- und/oder
gleichstromversorgte elektronische Betriebsgeräte für Leuchtstofflampen
Appareillages de lampes - Partie 2-3: Exigences particulières pour les appareillages
électroniques alimentés en courant alternatif et en courant continu pour lampes
fluorescentes
Ta slovenski standard je istoveten z: EN 61347-2-3:2011
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61347-2-3
NORME EUROPÉENNE
July 2011
EUROPÄISCHE NORM
ICS 29.140.99 Supersedes EN 60925:1991, EN 61347-2-3:2001 + corr. Jul.2003 + corr. Dec.2010 + A1:2004 +
A2:2006, EN 61347-2-4:2001 + corr. Jul.2003 + corr. Dec.2010, EN 61347-2-5:2001 + corr.
Jul.2003 + corr. Dec.2010, EN 61347-2-6:2001 + corr. Jul.2003 + corr. Dec.2010
English version
Lamp control gear -
Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic
control gear for fluorescent lamps
(IEC 61347-2-3:2011)
Appareillages de lampes - Geräte für Lampen -
Partie 2-3: Exigences particulières pour Teil 2-3: Besondere Anforderungen an
les appareillages électroniques alimentés wechsel- und/oder gleichstromversorgte
en courant alternatif et/ou en courant elektronische Betriebsgeräte für
continu pour lampes fluorescentes Leuchtstofflampen
(CEI 61347-2-3:2011) (IEC 61347-2-3:2011)
This European Standard was approved by CENELEC on 2011-06-23. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61347-2-3:2011 E
Foreword
The text of document 34C/955/FDIS, future edition 2 of IEC 61347-2-3, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 61347-2-3 on 2011-06-23.
This standard is to be used in conjunction with EN 61347-1:2008 + A1:2011.
This European Standard supersedes EN 60925:1991 + A1:1996 + A2:2001, EN 61347-2-3:2001 +
corrigendum July 2003 + corrigendum December 2010 + A1:2004 + A2:2006, EN 61347-2-4:2001 +
corrigendum July 2003 + corrigendum December 2010, EN 61347-2-5:2001 + corrigendum July 2003 +
corrigendum December 2010 and EN 61347-2-6:2001 + corrigendum July 2003 + corrigendum December
2010.
The significant revisions with respect to EN 61347-2-3:2001 are:
– rectifying test conditions when dimming;
– construction requirements;
– measurement circuits and limits for HF leakage currents;
– modification of the structure to become a standard exclusively for a.c. and d.c. central supplied
electronic control gear for general lighting and Annex J cover centrally supplied emergency control gear.
This part 2 supplements or modifies the corresponding clauses in EN 61347-1 so as to convert that
publication into the European Standard: Particular requirements for a.c. and/or d.c. supplied electronic
control gear for fluorescent lamps.
NOTE In this standard, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-03-23
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-06-23
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61347-2-3:2011
Endorsement notice
The text of the International Standard IEC 61347-2-3:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-2-22 NOTE Harmonized as EN 60598-2-22.
IEC 61195 NOTE Harmonized as EN 61195.
IEC 61199 NOTE Harmonized as EN 61199.
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60929 2011 AC and/or DC-supplied electronic EN 60929 201X
control gear for tubular fluorescent lamps -
Performance requirements
IEC 61347-1 (mod) 2007 Lamp controlgear - EN 61347-1 2008
+ A1 2010 Part 1: General and safety requirements + A1 2011
1) 1)
IEC 61347-2-7 201X Lamp controlgear - EN 61347-2-7 201X
Part 2-7: Particular requirements for battery
supplied electronic controlgear for emergency
lighting (self-contained)
IEC 61547 - Equipment for general lighting purposes - EN 61547 -
EMC immunity requirements
1)
To be published.
IEC 61347-2-3 ®
Edition 2.0 2011-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lamp control gear –
Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control
gear for fluorescent lamps
Appareillages de lampes –
Partie 2-3: Exigences particulières pour les appareillages électroniques
alimentés en courant alternatif et/ou en courant continu pour lampes
fluorescentes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 29.140.99 ISBN 978-2-88912-498-5
– 2 – 61347-2-3 © IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 8
5 General notes on tests . 9
6 Classification . 9
7 Marking . 9
8 Protection against accidental contact with live parts . 10
9 Terminals . 10
10 Provisions for earthing . 10
11 Moisture resistance and insulation . 10
12 Electric strength . 10
13 Thermal endurance test for windings . 10
14 Fault conditions . 10
15 Protection of associated components . 10
16 Abnormal conditions . 11
17 Behaviour of the control gear at end of lamp life . 12
18 Construction . 19
19 Creepage distances and clearances . 19
20 Screws, current-carrying parts and connections . 19
21 Resistance to heat, fire and tracking . 19
22 Resistance to corrosion . 19
Annex A (normative) Test to establish whether a conductive part is a live part which
may cause an electric shock . 24
Annex B (normative) Particular requirements for thermally protected lamp control gear . 25
Annex C (normative) Particular requirements for electronic lamp control gear with
means of protection against overheating . 26
Annex D (normative) Requirements for carrying out the heating tests of thermally
protected lamp control gear . 27
Annex E (normative) Use of constant S other than 4 500 in t tests . 28
w
Annex F (normative) Draught-proof enclosure . 29
Annex G (normative) Explanation of the derivation of the values of pulse voltages . 30
Annex H (normative) Tests . 31
Annex I (normative) Measurement of high-frequency leakage current . 32
Annex J (normative) Particular additional safety requirements for a.c., a.c./d.c. or d.c.
supplied electronic control gear for emergency lighting . 37
Annex K (informative) Components used in the asymmetric pulse test circuit (see
Figure 1) . 41
Annex L (normative) Information for control gear design (from Annex E of IEC 61195). 42
Bibliography . 43
61347-2-3 © IEC:2011 – 3 –
Figure 1 – Asymmetric pulse test circuit . 14
Figure 2 – Asymmetric power detection circuit . 16
Figure 3 – Open filament test circuits . 19
Figure 4 – Circuit for testing rectifying effect . 20
Figure 5 – Nomographs for the capacitive leakage current limits of HF-operated
fluorescent lamps . 23
Figure I.1 – Leakage current test arrangement for various fluorescent lamps . 36
Table 1 – Relation between r.m.s. working voltage and maximum peak voltage . 11
Table J.1 – Pulse voltages . 40
Table K.1 – Material specificatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.