EN 62561-2:2012

Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes

IEC 62561-2:2012(E) specifies the requirements and tests for: - metallic conductors (other than 'natural' conductors) that form part of the air termination system and down conductors; - metallic earth electrodes that form part of the earth termination system.

Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder

Composants des systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les conducteurs et les électrodes de terre

L'IEC 62561-2:2012 spécifie les exigences et les essais pour: - les conducteurs métalliques (autres que les conducteurs "naturels") qui font partie du dispositif de capture et des conducteurs de descente, - les électrodes de terre métalliques qui font partie de la prise de terre.

Elementi za zaščito pred strelo (LPSC) - 2. del: Zahteve za vodnike in zemeljske elektrode (IEC 62561-2:2012, spremenjen)

Ta del standarda IEC 62561 določa zahteve in preskuse za: – kovinske prevodnike (razen »naravnih« prevodnikov), ki so del lovilnega sistema in navzdolnjih prevodnikov; – kovinskih ozemljil, ki so del ozemljitvenega sistema.

General Information

• Status: Withdrawn
• Publication Date: 31-May-2012
• Withdrawal Date: 15-Mar-2015
• ICS: 29.020 - Electrical engineering in general
• ICS: 91.120.40 - Lightning protection
• Technical Committee: CLC/TC 81X - Lightning protection
• Drafting Committee: IEC/TC 81 - IEC_TC_81
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2021
• Completion Date: 01-Mar-2021
• Ref Project: SIST EN 62561-2:2012 - Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes

Relations

• Replaces: EN 50164-2:2008 - Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62561-2:2018 - Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 07-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und ErderComposants de systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les conducteurs et les électrodes de terreLightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes91.120.40Lightning protectionICS:Ta slovenski standard je istoveten z:EN 62561-2:2012SIST EN 62561-2:2012en01-julij-2012SIST EN 62561-2:2012SLOVENSKI
STANDARDSIST EN 50164-2:20081DGRPHãþD



SIST EN 62561-2:2012



EUROPEAN STANDARD EN 62561-2 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62561-2:2012 E
ICS 29.020; 91.120.40 Supersedes EN 50164-2:2008English version
Lightning Protection System Components (LPSC) -
Part 2: Requirements for conductors and earth electrodes (IEC 62561-2:2012, modified)
Composants des systèmes de protectioncontre la foudre (CSPF) -Partie 2: Exigences pour les conducteurset les électrodes de terre(CEI 62561-2:2012, modifiée)
Blitzschutzsystembauteile (LPSC) -Teil 2: Anforderungen an Leiter und Erder(IEC 62561-2:2012, modifiziert) This European Standard was approved by CENELEC on 2012-03-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 62561-2:2012



EN 62561-2:2012 - 2 -
Foreword The text of document 81/417/FDIS, future edition 1 of IEC 62561-2, prepared by IEC/TC 81, "Lightning protection", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62561-2:2012. A draft amendment, which covers common modifications to IEC 62561-2 (81/417/FDIS), was prepared by CLC/TC 81X "Lightning protection" and approved by CENELEC. The following dates are fixed: – latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-03-16 – latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-03-16 This document supersedes EN 50164-2:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62561-2:2012 are prefixed “Z”. Endorsement notice The text of the International Standard IEC 62561-2:2012 was approved by CENELEC as a European Standard with agreed common modifications. SIST EN 62561-2:2012



- 3 - EN 62561-2:2012
COMMON MODIFICATIONS Whole document Replace all references to IEC 62305 by references to EN 62305. Replace all references to IEC 62561 by references to EN 62561. 4 Requirements Under 4.3, Table 1, footnote g, replace "IEC 60228" by "EN 60228". Under 4.5, Table 3, footnote i, replace "IEC 60228" by "EN 60228". 5 Tests Under 5.2.5.1, 1st line, replace “ISO 6892-1” by “EN ISO 6892-1”. Under 5.2.5.1, 3rd line, replace “as per D.1 of ISO 6892-1:2009” by “as per D.1 of EN ISO 6892-1:2009". Annexes Annex A (normative) Environmental test for conductors, air termination rods and earth lead-in rods In A.1, replace twice "IEC 60068-2-52:1996" by "EN 60068-2-52:1996". SIST EN 62561-2:2012



EN 62561-2:2012 - 4 -
Add the following new annexes: Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited ap
...