EN IEC 62561-2:2018/AC:2019-09

Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes

Part 2 of IEC 62561 specifies the requirements and tests for:
– metallic conductors (other than "natural" conductors) that form part of the air-termination
and down-conductor systems,
– metallic earth electrodes that form part of the earth-termination system.

Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder

Composants des systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences pour les conducteurs et les électrodes de terre

Elementi za zaščito pred strelo (LPSC) - 2. del: Zahteve za vodnike in ozemljila - Popravek AC

2. del standarda IEC 62561 določa zahteve in preskuse za:
– kovinske prevodnike (ki niso »naravni« prevodniki), ki tvorijo del lovilnih in odvodnih sistemov;
– kovinska ozemljila, ki tvorijo del ozemljitvenega sistema.

General Information

• Status: Published
• Publication Date: 19-Sep-2019
• ICS: 29.020 - Electrical engineering in general
• ICS: 91.120.40 - Lightning protection
• Technical Committee: CLC/TC 81X - Lightning protection
• Drafting Committee: CLC/TC 81X - Lightning protection
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Sep-2019
• Completion Date: 20-Sep-2019
• Ref Project: SIST EN IEC 62561-2:2018/AC:2019 - Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes

Relations

• Corrects: EN IEC 62561-2:2018 - Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 10-Sep-2019
• Revised: prEN IEC 62561-2:2024 - Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
• Effective Date: 16-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2019
Elementi za zaščito pred strelo (LPSC) - 2. del: Zahteve za vodnike in ozemljila -
Popravek AC
Lightning protection system components (LPSC) - Part 2: Requirements for conductors
and earth electrodes
Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen an Leiter und Erder
Composants des systèmes de protection contre la foudre (CSPF) - Partie 2: Exigences
pour les conducteurs et les électrodes de terre
Ta slovenski standard je istoveten z: EN IEC 62561-2:2018/AC:2019-09
ICS:
91.120.40 Zaščita pred strelo Lightning protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62561-
2:2018/AC:2019-09
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 29.020; 91.120.40
English Version
Lightning protection system components (LPSC) - Part 2:
Requirements for conductors and earth electrodes
(IEC 62561-2:2018/COR1:2019)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 2: Anforderungen
(CSPF) - Partie 2: Exigences pour les conducteurs et les an Leiter und Erder
électrodes de terre (IEC 62561-2:2018/COR1:2019)
(IEC 62561-2:2018/COR1:2019)
This corrigendum becomes effective on 20 September 2019 for incorporation in the English language version of the EN.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-2:2018/AC:2019-09 E

Endorsement notice
The text of the corrigendum IEC 62561-2:2018/COR1:2019 was approved by CENELEC as EN IEC 62561-2:2018/AC:2019-09 without any
modification.
IEC 62561-2:2018/COR1:2019 – 1 –
 IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62561-2 IEC 62561-2
Edition 2.0  2018-01 Édition 2.0  2018-01

LIGHTNING PROTECTION SYSTEM COMPOSANTS DES SYSTÈMES DE PROTECTION
COMPONENTS (LPSC) – CONTRE LA FOUDRE (CSPF) –

Part 2: Requirements for conductors and earth Partie 2: Exigences pour les conducteurs et les
electrodes électrodes de terre

CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

4 Requirements
4.1 General
In the third paragraph, replace "A summary" with "Summaries".
4.4.4 Earth conductors and earth plates
In the second paragraph, replace "and 5.2.4." with ", 5.2.4, 5.2.5 and 5.2.6.".
5.2 Conductors, air-termination rods, earth lead-in rods and earth electrodes (except
earth rods)
Replace the title of 5.2 with the following new title:
5.2 Air termination conductors, air-termination rods, earth lead-in rods, earth
conductors and earth plates
5.2.1 General
In the first paragraph, replace "electrodes" with "conductors and earth plates".
After the first paragraph, add the following new paragraph:
Earth electrodes shall be subjected to the tests according to Annex D.
In the last paragraph, replace "Conductors" with "Air-termination conductors" and replace
"and earth electrodes (except earth rods)" with ", earth conductors and earth plates".
IEC 62561-2:2018-01/COR1:2019-08(en-fr)

– 2 – IEC 62361-2:2018/COR1:2019
 IEC 2019
5.2.2 Test for thickness of coating
5.2.2.1 General conditions for tests
In the second and third paragraphs, replace "conductor" with "specimen".
5.2.2.2 Acceptance criteria
At the end of the first sentence, add the following new text: "and Table 3 for earth conductors
and earth plates.".
5.2.4.1 General conditions for tests
In the last paragraph, replace "Clause A.1" with "Clause A.2" and replace "Clause A.2" with
"Clause A.3".
5.2.5.1 General conditions for tests
In the first sentence of the first paragraph and in the second paragraph, delete "of conductor".
In the last paragraph, replace "The dimensions of the conductor" with "The dimensions of the
sample".
5.2.6.1 General conditions f
...