EN IEC 61169-24:2019

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

IEC 61169-24:2019 is available as IEC 61169-24:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61169-24:2019, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 75 W cable networks (type F). It describes the interface dimensions with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to type F connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. This third edition cancels and replaces the second edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition: all drawings have been reworked and improved to allow frequency extension up to 3 GHz.

Hochfrequenz-Steckverbinder - Teil 24: Rahmenspezifikation - Koaxiale Hochfrequenzsteckverbinder mit Schraubkupplung, vorzugsweise für den Einsatz in 75 Ohm Kabelnetzen (Typ F)

Connecteurs pour fréquences radioeléctriques - Partie 24: Spécification intermédiaire - Connecteurs coaxiaux pour fréquences radioélectriques avec couplage à vis, typiquement utilisés dans des réseaux de distribution par câbles de 75 Ω (type F)

IEC 61169-24:2019 est disponible sous forme de IEC 61169-24:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61169-24:2019, qui est une spécification intermédiaire (SS), fournit des informations et des règles pour l’établissement de spécifications particulières (DS) pour les connecteurs coaxiaux pour fréquences radioélectriques avec couplage à vis, typiquement utilisés dans des réseaux de distribution par câbles de 75 W (type F). Elle décrit les dimensions d’interface avec les informations sur les calibres et les essais obligatoires, sélectionnés dans l’IEC 61169-1, applicables à toutes les spécifications particulières relatives aux connecteurs de type F. La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière (DS) et porte sur des programmes d’essai et des exigences de contrôle. Cette troisième édition annule et remplace la deuxième édition parue en 2009. La présente édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: tous les dessins ont été retravaillés et améliorés pour permettre une extension de fréquence jusqu’à 3 GHz.

Radiofrekvenčni konektorji - 24. del: Področna specifikacija - Radiofrekvenčni koaksialni konektorji z navojnim spajanjem, tipični za uporabo v 75 ohm kabelskih omrežjih (tip F) (IEC 61169-24:2019)

Standard EN-IEC 61169-24, ki je področna specifikacija (SS), podaja informacije in pravila za pripravo podrobnih specifikacij (DS) za radiofrekvenčne koaksialne konektorje z zaskočnim spajanjem, običajno za uporabo v 75-ohmskih kabelskih omrežjih (vrste F). Dimenzije vmesnikov opisuje z merjenjem informacij, skupaj z obveznimi preskusi, izbranimi iz standarda IEC 61169-1, ki se uporabljajo za vse podrobne specifikacije v zvezi s konektorji vrste F. Ta specifikacija določa priporočene lastnosti, ki jih je treba upoštevati pri pripravi podrobnih specifikacij, ter zajema urnike preskusov in zahteve za pregled.

General Information

• Status: Published
• Publication Date: 19-Sep-2019
• Withdrawal Date: 22-Aug-2022
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Sep-2019
• Completion Date: 20-Sep-2019
• Ref Project: SIST EN IEC 61169-24:2019 - Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ohms cable networks (type F) (IEC 61169-24:2019)

Relations

• Replaces: EN 61169-24:2009 - Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F)
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN 61169-24:2009
Radiofrekvenčni konektorji - 24. del: Področna specifikacija - Radiofrekvenčni
koaksialni konektorji z navojnim spajanjem, tipični za uporabo v 75 ohm kabelskih
omrežjih (tip F) (IEC 61169-24:2019)
Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial
connectors with screw coupling, typically for use in 75 Ohms cable networks (type F)
(IEC 61169-24:2019)
Hochfrequenzsteckverbinder - Teil 24: Rahmenspezifikation - Koaxiale
Hochfrequenzsteckverbinder mit Schraubkupplung, vorzugsweise für den Einsatz in 75
Ohm Kabelnetzen (Typ F) (IEC 61169-24:2019)
Connecteurs pour fréquences radioeléctriques - Partie 24: Spécification intermédiaire -
Connecteurs coaxiaux pour fréquences radioélectriques avec couplage vissé,
typiquement utilisés dans des réseaux de distribution par câbles de 75 Ohms (type F)
(IEC 61169-24:2019)
Ta slovenski standard je istoveten z: EN IEC 61169-24:2019
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61169-24

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 31.220.10 Supersedes EN 61169-24:2009 and all of its
amendments and corrigenda (if any)
English Version
Radio-frequency connectors - Part 24: Sectional specification -
Radio frequency coaxial connectors with screw coupling,
typically for use in 75 O cable networks (type F)
(IEC 61169-24:2019)
Connecteurs pour fréquences radioeléctriques - Partie 24: Hochfrequenz-Steckverbinder - Teil 24:
Spécification intermédiaire - Connecteurs coaxiaux pour Rahmenspezifikation - Koaxiale
fréquences radioélectriques avec couplage vissé, Hochfrequenzsteckverbinder mit Schraubkupplung,
typiquement utilisés dans des réseaux de distribution par vorzugsweise für den Einsatz in 75 Ohm Kabelnetzen (Typ
câbles de 75 Ohms (type F) F)
(IEC 61169-24:2019) (IEC 61169-24:2019)
This European Standard was approved by CENELEC on 2019-08-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61169-24:2019 E

European foreword
The text of document 46F/417/CDV, future edition 3 of IEC 61169-24, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-24:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-05-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-08-23
document have to be withdrawn
This document supersedes EN 61169-24:2009 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61169-24:2019 was approved by CENELEC as a European
Standard without any modification.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61169-1 2013 Radio frequency connectors - Part 1: EN 61169-1 2013
Generic specification - General
requirements and measuring methods
Environmental testing - Test methods. EN 60068-2-52 -
Tests. Test Kb. Salt mist, cyclic (sodium
chloride solution)
IEC 61169-24 ®
Edition 3.0 2019-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio-frequency connectors –
Part 24: Sectional specification – Radio frequency coaxial connectors with screw

coupling, typically for use in 75 Ω cable networks (type F)

Connecteurs pour fréquences radioélectriques –

Partie 24: Spécification intermédiaire – Connecteurs coaxiaux pour fréquences

radioélectriques avec couplage à vis, typiquement utilisés dans des réseaux de

distribution par câbles de 75 Ω (type F)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.220.10 ISBN 978-2-8322-7077-6

– 2 – IEC 61169-24:2019 © IEC 2019
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Interface dimensions . 6
4.1 Dimensions . 6
4.1.1 Connector “F” type female socket (indoor) physical dimensions . 6
4.1.2 Connector “F” type male plug (indoor) physical dimensions . 7
4.2 Mechanical gauges . 9
4.2.1 Mating socket centre conductor acceptance diameter test . 9
4.2.2 Mating port centre conductor acceptance electrical test . 10
4.2.3 Reference plane electrical contact . 10
5 Quality assessment procedures . 10
5.1 General . 10
5.2 Ratings and characteristics . 10
5.3 Environmental characteristics for outdoor sockets (see Annex A) . 12
5.4 Test schedule and inspection requirements. 12
5.4.1 Acceptance tests . 12
5.4.2 Periodic tests . 13
5.5 Procedures . 15
5.5.1 Quality conformance inspection . 15
5.5.2 Qualification approval and its maintenance . 15
6 Instructions for preparation of detail specifications . 15
6.1 General . 15
6.2 Identification of the component . 15
6.3 Performance . 16
6.4 Marking, ordering information and related matters . 16
6.5 Selection of tests, test conditions and severities . 16
6.6 Blank detail specification pro-forma for type F connector . 16
Annex A (informative) Recommended outdoor “F” type socket / Plug physical
dimensions . 22
A.1 Outdoor “F” type female socket . 22
A.2 Outdoor “F” type male plug . 23
Annex B (informative) Recommended satellite broadcasting “F” type socket / Plug
physical dimensions . 25
B.1 Satellite broadcasting “F” type female socket . 25
B.2 Satellite broadcasting “F” type male plug . 25

Figure 1 – Connector “F” type female socket (indoor) (for dimensions, see Table 1) . 7
Figure 2 – Connector “F” type male plug (indoor) (for dimensions, see Table 2) . 8
Figure 3 – Gauge for the centre socket conductor . 9
Figure A.1 – Outdoor female “F” socket (for dimensions, see Table A.1) . 22
Figure A.2 – Outdoor “F” type male plug (for dimensions, see Table A.2) . 23
Figure B.1 – Satellite broadcasting “F” socket (for dimensions, see Table B.1) . 25
Figure B.2 – Satellite broadcasting “F” type male plug (for dimensions, see Table B.2) . 26

IEC 61169-24:2019 © IEC 2019 – 3 –

Table 1 – Connector “F” type female socket (indoor) . 7
Table 2 – Connector “F” type male plug (indoor) . 8
Table 3 – Test sequence for the centre socket conductor . 9
Table 4 – Ratings and characteristics . 11
Table 5 – Acceptance tests . 13
Table 6 – Periodic tests . 14
Table A.1 – Outdoor female “F” socket dimensions . 23
Table A.2 – Outdoor “F” type male plug dimensions . 24
Table B.1 – Satellite broadcasting “F” type socket dimensions . 25
Table B.2 – Satellite broadcasting “F” type male plug dimensions . 26

– 4 – IEC 61169-24:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 24: Sectional specification – Radio frequency coaxial connectors
with screw coupling, typically for use in 75 Ω cable networks (type F)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in t
...