EN 60384-9:2005
(Main)Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 2), intended for use in electronic equipment, including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 9: Rahmenspezifikation - Keramik-Festkondensatoren, Klasse 2
Condensateurs fixes utilisés dans les équipements électroniques - Partie 9: Spécification intermédiaire: Condensateurs fixes à diélectrique en céramique de classe 2
is applicable to fixed capacitors of ceramic dielectric with a defined temperature coefficient (dielectric Class 2), intended for use in electronic equipment, including leadless capacitors but excluding fixed surface mount multilayer capacitors of ceramic dielectric.
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 9. del: Področna specifikacija: pritrjeni kondenzatorji s keramičnim dielektrikom, razred 2 (IEC 60384-9:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60384-9:2005
STANDARD
december 2005
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 9. del: Področna
specifikacija: pritrjeni kondenzatorji s keramičnim dielektrikom, razred 2 (IEC
60384-9:2005)
Fixed capacitors for use in electronic equipment – Part 9: Sectional specification:
Fixed capacitors of ceramic dielectric, Class 2 (IEC 60384-9:2005)
ICS 31.060.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60384-9
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2005
ICS 31.060.20 Supersedes CECC 30 700:1989
English version
Fixed capacitors for use in electronic equipment
Part 9: Sectional specification:
Fixed capacitors of ceramic dielectric, Class 2
(IEC 60384-9:2005)
Condensateurs fixes utilisés Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 9: Spécification intermédiaire: Teil 9: Rahmenspezifikation –
Condensateurs fixes à diélectrique Keramik-Festkondensatoren, Klasse 2
en céramique de classe 2 (IEC 60384-9:2005)
(CEI 60384-9:2005)
This European Standard was approved by CENELEC on 2005-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-9:2005 E
Foreword
The text of document 40/1530/FDIS, future edition 3 of IEC 60384-9, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-9 on 2005-05-01.
This European Standard supersedes CECC 30 700:1989.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-9:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-9:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60063 1963 Preferred number series for resistors and - -
capacitors
A1 1967 - -
A2 1977 - -
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60384-1 1999 Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + corr. october 2001
Part 1: Generic specification
IEC 60410 1973 Sampling plans and procedures for - -
inspection by attributes
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.
INTERNATIONAL IEC
STANDARD 60384-9
QC 300700
Third edition
2005-05
Fixed capacitors for use in electronic equipment –
Part 9:
Sectional specification:
Fixed capacitors of ceramic dielectric,
Class 2
” IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
U
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
– 2 – 60384-9 ¤ IEC:2005(E)
CONTENTS
1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .6
1.4.1 Outline drawing and dimensions .7
1.4.2 Mounting .7
1.4.3 Ratings and characteristics.7
1.4.4 Marking .7
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.2 Preferred values of ratings .9
3 Quality assessment procedures.10
3.1 Primary stage of manufacture.10
3.2 Structurally similar components.10
3.3 Certified records of released lots.10
3.4 Qualification Approval .11
3.5 Quality Conformance Inspection.16
4 Test and measurement procedures.18
4.1 Special preconditioning .18
4.2 Visual examination and check of dimensions.18
4.3 Electrical tests.18
4.4 Temperature characteristic of capacitance .20
4.5 Robustness of terminations .21
4.6 Resistance to soldering heat .21
4.7 Solderability .22
4.8 Rapid change of temperature .22
4.9 Vibration.22
4.10 Bump .23
4.11 Shock.23
4.12 Climatic sequence .24
4.13 Damp heat, steady state.26
4.14 Endurance.26
4.15 Component solvent resistance (if applicable).27
4.16 Solvent resistance of the marking (if applicable).27
Annex A (normative) Capacitance ageing of fixed capacitors of ceramic dielectric,
Class 2 .28
60384-9 ¤ IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 9: Sectional specification:
Fixed capacitors of ceramic dielectric, Class 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-9 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This third edition cancels and replaces the second edition published in 1988 and amendment 1
(2000). This third edition is a result of maintenance activities related to the previous edition.
All changes that have been agreed upon can be categorized as minor revisions.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1530/FDIS 40/1550/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
– 4 – 60384-9 ¤ IEC:2005(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in
electronic equipment:
Part 1: Generic specification
Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
d.c. capacitors
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.