EN 61193-2:2007
(Main)Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
Applies to the inspection of electronic components, packages, and also modules (referred to as 'products in this standard) for use in electronic and electric equipment. It specifies sampling plans for inspection by attributes on the assumption that the acceptance number is zero (Ac = 0), including criteria for sample selection and procedures.
Qualitätsbewertungssysteme - Teil 2: Auswahl und Anwendung von Stichprobenanweisungen für die Prüfung elektronischer Bauelemente und Gehäuse
Système d'assurance de la qualité - Partie 2: Choix et utilisation des plans d'échantillonnages pour le contrôle des composants électroniques et des boîtiers
Sistemi ocenjevanja kakovosti - 2. del: Izbira in uporaba planov vzorčenja za pregledovanje elektronskih komponent in embalaže (IEC 61193-2:2007)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61193-2:2008
01-junij-2008
6LVWHPLRFHQMHYDQMDNDNRYRVWLGHO ,]ELUDLQXSRUDEDSODQRYY]RUþHQMD]D
SUHJOHGRYDQMHHOHNWURQVNLKNRPSRQHQWLQHPEDODåH ,(&
Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection
of electronic components and packages
Qualitätsbewertungssysteme -- Teil 2: Auswahl und Anwendung von
Stichprobenanweisungen für die Prüfung elektrischer Bauelemente und Gehäuse
Système d'assurance de la qualité -- Partie 2: Choix et utilisation des plans
d'échantillonnages pour le contrôle des composants électroniques et des boîtiers
Ta slovenski standard je istoveten z: EN 61193-2:2007
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
SIST EN 61193-2:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61193-2:2008
---------------------- Page: 2 ----------------------
SIST EN 61193-2:2008
EUROPEAN STANDARD
EN 61193-2
NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM
ICS 31.190
English version
Quality assessment systems -
Part 2: Selection and use of sampling plans for inspection
of electronic components and packages
(IEC 61193-2:2007)
Système d'assurance de la qualité - Qualitätsbewertungssysteme -
Partie 2: Choix et utilisation des plans Teil 2: Auswahl und Anwendung von
d'échantillonnages pour le contrôle
Stichprobenanweisungen für die Prüfung
des composants électroniques elektrischer Bauelemente und Gehäuse
et des boîtiers (IEC 61193-2:2007)
(CEI 61193-2:2007)
This European Standard was approved by CENELEC on 2007-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61193-2:2007 E
---------------------- Page: 3 ----------------------
SIST EN 61193-2:2008
EN 61193-2:2007 - 2 -
Foreword
The text of document 91/690/FDIS, future edition 1 of IEC 61193-2, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61193-2 on 2007-11-01
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61193-2:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62421 NOTE Harmonized as EN 62421:2007 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 61193-2:2008
- 3 - EN 61193-2:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60194 - Printed board design,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.