A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

This International Standard specifies performance requirements for electronic ballasts for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with tubular fluorescent lamps as specified in EN 60081 and EN 60901 and other tubular fluorescent lamps for high frequency operation.

Wechselstromversorgte elektronische Vorschaltgeräte für röhrenförmige Leuchtstofflampen - Anforderungen an die Arbeitsweise

Ballasts électroniques alimentés en courant alternatif pour lampes tubulaires à fluorescence - Prescriptions de performances

La présente Norme internationale spécifie les prescriptions de performances pour les ballasts électroniques alimentés en courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz, avec des fréquences de travail s'écartant de la fréquence d'alimentation, et utilisés en association avec des lampes tubulaires à fluorescence comme celles indiquées dans la EN 60081 et la EN 60901, ou avec d'autres types de lampes à fluorescence pour fonctionnement à haute fréquence.

Izmenično napajane elektronske predstikalne naprave za cevaste fluorescentne svetilke – Zahteve za lastnosti (IEC 60929:2003)

General Information

Status
Withdrawn
Publication Date
25-Mar-2004
Withdrawal Date
28-Feb-2007
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2013
Completion Date
01-Feb-2013

Relations

Buy Standard

Standard
EN 60929:2004
English language
152 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


EUROPEAN STANDARD EN 60929
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 29.140.30 Supersedes EN 60929:1992 + A1:1995 + A2:1996

English version
A.C. supplied electronic ballasts for tubular fluorescent lamps -
Performance requirements
(IEC 60929:2003)
Ballasts électroniques alimentés  Wechselstromversorgte elektronische
en courant alternatif pour lampes Vorschaltgeräte für röhrenförmige
tubulaires à fluorescence - Leuchtstofflampen -
Prescriptions de performances Anforderungen an die Arbeitsweise
(CEI 60929:2003) (IEC 60929:2003)

This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60929:2004 E
Foreword
The text of document 34C/618/FDIS, future edition 2 of IEC 60929, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60929 on 2004-03-01.

This European Standard Supersedes EN 60929:1992 + A1:1995 + A2:1996.

In this new edition digital signal control of electronic ballasts has been introduced.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-12-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-03-01

Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60929:2003 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60929:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
1)
IEC 60410 - Sampling plans and procedures for - -
inspection by attributes
1)
3)
IEC 60669-2-1 - Switches for household and similar fixed EN 60669-2-1 -
(mod) electrical installations
Part 2-1: Particular requirements -
Electronic switches
1) 2)
IEC 60901 - Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
IEC 61000-3-2 2000 Electromagnetic compatibility (EMC) EN 61000-3-2 2000
(mod) Part 3-2: Limits - Limits for harmonic
current emissions (equipment input
current up to and including 16 A per
phase)
A1 2001 - -
1) 2)
IEC 61347-1 - Lamp controlgear EN 61347-1 2001
Part 1: General and safety requirements + corr. July 2003

1) 2)
IEC 61347-2-3 - Part 2-3: Particular requirements for a.c. EN 61347-2-3 2001
supplied electronic ballasts for + corr. July 2003
fluorescent lamps
1) 2)
IEC 61547 - Equipment for general lighting purposes - EN 61547 1995
EMC immunity requirements
1)
Undated reference.
2)
Valid edition at date of issue.
3)
In preparation.
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-12
Ballasts électroniques alimentés en courant
alternatif pour lampes tubulaires à fluorescence –
Prescriptions de performances
AC-supplied electronic ballasts for tubular
fluorescent lamps –
Performance requirements
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photocopie et les photocopying and microfilm, without permission in writing from
électronique ou mécanique,
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
XG
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60929 © IEC:2003 – 3 –
CONTENTS
FOREWORD.7
INTRODUCTION.11
1 Scope.13
2 Normative references .13
3 Terms and definitions .13
4 General notes on tests .17
5 Marking .17
6 General statement .19
7 Starting conditions.19
8 Operating conditions.25
9 Circuit power factor .25
10 Supply current .27
11 Maximum current in any lead to a cathode.27
12 Current waveform .27
13 Magnetic screening .29
14 Impedance at audio frequencies .29
15 Mains transient overvoltages .29
16 Operational tests for abnormal conditions.31
17 Endurance.31
Annex A (normative)  Tests.47
Annex B (normative) Reference ballasts .57
Annex C (normative) Reference lamps.63
Annex D (informative)  Explanation of starting conditions.65
Annex E (normative) Control interface for controllable ballasts .75
Annex F (informative)  A guide to quoting product life and failure rate.137
Annex G (informative) Test procedures for ballasts with digital control interface
according to Clause E.4.139
Figure 1 – Interpretation of effective heating current .35
Figure 2 – Open-circuit voltage requirements for ballasts with current-controlled
preheating .37
Figure 3 – Test circuit for non-preheat starting mode .39
Figure 4 – Measurement of current waveform .41
Figure 5 – Measurement of impedance at audio frequencies.43
Figure 6 – Test circuit for ballasts for current-controlled preheat starting mode.43
Figure 7 – HF reference circuit.45
Figure 8 – Cathode heating current requirements for current-controlled ballasts .45

60929 © IEC:2003 – 5 –
Figure E.1 – Replacement diagram at ballast’s control terminals.85
Figure E.2 – Required timing at the ballast terminals of the digital interface.89
Figure E.3 – Voltage and current levels for forward and backward channeling at the
ballast's digital interface terminals .91
Figure E.4 – Example of command repetition time .95
Table A.1 – Test transient overvoltages .53

60929 © IEC:2003 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AC-SUPPLIED ELECTRONIC BALLASTS
FOR TUBULAR FLUORESCENT LAMPS –
PERFORMANCE REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60929 has been prepared by subcommittee 34C: Auxiliaries for
lamps, of IEC technical committee 34: Lamps and related equipment.
This second edition cancels and replaces the first edition published in 1990, Amendment 1
(1994) and Amendment 2 (1996). This second edition cons
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.