EN 60317-26:1996/A2:2010
(Amendment)Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200
Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200
Amandma A2:2010 je dodatek k standardu SIST EN 60317-26:2001
This International Standard specifies the requirements of enamelled round copper winding wire of class 200 with a sole coating based on polamide-imide resin. Class 200 is a thermal class that requires a minimum temperature index of 200 and a heat shock temperature of at least 220 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is:
Grade 1: 0,071 mm up to and including 1,600 mm;
Grade 2: 0,071 mm up to and including 0,500 mm.
The nominal conductor diameters are specified in clause 4 of IEC 317-0-1.
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 26: Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage - Partie 26: Fil de section circulaire en cuivre émaillé avec polyamide-imide, classe 200
Specifikacije za posebne tipe navitij - 26. del: S poliesterimidom emajliran bakren okrogel vodnik, razred 200 - Dopolnilo A2 (IEC 60317-26:1990/A2:2010)
Amandma A2:2010 je dodatek k standardu SIST EN 60317-26:2001.
Ta mednarodni standard določa zahteve za emajliran bakren okrogel vodnik razreda 200 z enojnim premazom, osnovanim na poliamidimidni smoli. Razred 200 je toplotni razred, ki zahteva minimalni temperaturni indeks 200 °C in temperaturo toplotnega šoka najmanj 220 °C. Temperatura v stopinjah Celzija, ki ustreza temperaturnemu indeksu, ni nujno ta, pri kateri se priporoča delovanje vodnika, saj je le-to odvisno od več dejavnikov, vključno s tipi uporabljene opreme. Razpon nominalnih premerov prevodnikov, ki jih zajema ta standard, je:
stopnja 1: 0,071 mm do vključno 1,600 mm;
stopnja 2: 0,071 mm do vključno 0,500 mm.
Nominalni premeri prevodnikov so določeni v klavzuli 4 IEC 317-0-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2010
Specifikacije za posebne tipe navitij - 26. del: S poliesterimidom emajliran bakren
okrogel vodnik, razred 200 - Dopolnilo A2 (IEC 60317-26:1990/A2:2010)
Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled
round copper wire, class 200 (IEC 60317-26:1990/A2:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 26:
Runddrähte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 200 (IEC 60317-
26:1990/A2:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 26: Fil de section
circulaire en cuivre émaillé avec polyamide-imide, classe 200 (CEI 60317-
26:1990/A2:2010)
Ta slovenski standard je istoveten z: EN 60317-26:1996/A2:2010
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-26/A2
NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 26: Polyamide-imide enamelled round copper wire, class 200
(IEC 60317-26:1990/A2:2010)
Spécifications pour types particuliers Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 26: Fil de section circulaire Teil 26: Runddrähte aus Kupfer,
en cuivre émaillé avec polyamide-imide, lackisoliert mit Polyamidimid, Klasse 200
classe 200 (IEC 60317-26:1990/A2:2010)
(CEI 60317-26:1990/A2:2010)
This amendment A2 modifies the European Standard EN 60317-26:1996; it was approved by CENELEC on
2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-26:1996/A2:2010 E
Foreword
The text of document 55/1183/FDIS, future amendment 2 to IEC 60317-26:1990, prepared by IEC TC 55,
Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
amendment A2 to EN 60317-26:1996 on 2010-06-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2011-03-01
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-06-01
with the amendment have to be withdrawn
__________
Endor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.