EN IEC 60512-11-1:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

IEC 60512-11-1:2019 when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar devices (i.e. when the degradation mechanisms are the same) when specified in a detail (product) specification. The object of this test is to define a standard test method to assess the ability of connectors to function in a specified manner, in a specified environment which might be encountered during normal use, including storage. This document provides a standard composite test method for determining the suitability of connectors when subjected to environmental conditions consisting of a sequence of temperature, humidity and, where required, low air pressure environmental stresses. Key words: Connectors, Climatic Tests

Steckverbinder für elektrische und elektronische Einrichtungen - Prüfungen und Messungen - Teil 11-1: Klimatische Prüfungen - Prüfung 11a - Klimafolge

Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 11-1: Essais climatiques - Essai 11a - Séquence climatique

IEC 60512-11-1:2019 est utilisée, lorsque la spécification particulière (de produit) l'exige, pour soumettre à l'essai des connecteurs qui entrent dans le domaine d'application du comité d'études 48 de l'IEC. Cet essai peut aussi être utilisé sur des dispositifs similaires (c'est-à-dire lorsque les mécanismes de dégradation sont les mêmes) lorsqu'une spécification particulière (de produit) l'indique. L'objet de cet essai est de définir une méthode d'essai normalisée pour évaluer l'aptitude des connecteurs à fonctionner de manière spécifiée dans un environnement spécifié qui pourrait être rencontré dans des conditions normales d'utilisation, y compris le stockage. Le présent document fournit une méthode d'essai composite normalisée pour déterminer l'aptitude des connecteurs soumis à des conditions d'environnement consistant en une séquence de contraintes climatiques comportant température, humidité, et si cela est exigé, basse pression. Mots clés: connecteurs, Essais climatiques

Konektorji za električno in elektronsko opremo - Preskusi in meritve - 11-1. del: Klimatski preskusi - Preskus 11a - Klimatsko zaporedje (IEC 60512-11-1:2019)

Ta del standarda IEC 60512 se uporablja, če tako zahteva podrobna specifikacija (izdelka), za preskušanje konektorjev na področju uporabe določil tehničnega odbora IEC 48. Ta preskus se lahko uporablja tudi za podobne naprave (npr. če imajo enak mehanizem degradacije), če je tako določeno v podrobni specifikaciji (izdelka).
Cilj tega preskusa je, da določi standardno preskusno metodo za oceno zmožnosti konektorjev, da delujejo na določen način, v določenem okolju, kot bo to pri običajni uporabi, vključno s shranjevanjem.
Ta dokument zagotavlja standardno sestavljeno preskusno metodo za določanje primernosti konektorja, izpostavljenega okoljskim pogojem, ki so sestavljeni iz zaporedja okoljskih obremenitev, kot so temperatura, vlažnost in (če je to ustrezno) nizek zračni tlak.
Vrstni red izpostavljanja obremenitvam in pogojem za spremembo iz enega koraka v drugega je bil izbran tako, da pospeši, poveča ter omogoči morebitne interakcije enakih mehanizmov degradacije, kot so tisti, do katerih pride pri naravnih podnebnih razmerah.
Pri sestavljenem preskusu so konektorski preskušanci izpostavljeni okoljskim preskusom v standardnem vrstnem redu in so kategorizirani glede na njihove podnebne kategorije, kot je to določeno v podrobni specifikaciji (izdelka), vendar pa je tretja skupina številk uporabljena kot oznaka števila ciklov v 5. koraku preskusa s ciklično vlažno vročino v skladu s standardom IEC 60512-11-12.
Če so potrebne spremembe, podrobna specifikacija ustreznega konektorja (izdelka) podaja potrebne informacije za vsak korak metode.
Ta preskus je pogosto določen tako, da sledi drugim preskusom mehanskih obremenitev, na primer preskusom robustnosti priključkov, preskusom primernosti za spajkanje ali preskusom z udarci in vibracijami, kot sredstvo za določanje, ali je tesnitev preskušanca poškodovana.

General Information

• Status: Published
• Publication Date: 04-Jul-2019
• Withdrawal Date: 19-Jun-2022
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-Jul-2019
• Completion Date: 05-Jul-2019
• Ref Project: SIST EN IEC 60512-11-1:2019 - Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence (IEC 60512-11-1:2019)

Relations

• Replaces: EN 60512-11-1:1999 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
• Effective Date: 09-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60512-11-1:2019
01-oktober-2019
Nadomešča:
SIST EN 60512-11-1:2002
Konektorji za električno in elektronsko opremo - Preskusi in meritve - 11-1. del:
Klimatski preskusi - Preskus 11a - Klimatsko zaporedje (IEC 60512-11-1:2019)
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-
1: Climatic tests - Test 11a - Climatic sequence (IEC 60512-11-1:2019)
Elektrisch-mechanische Bauelemente für elektronische Einrichtungen - Mess- und
Prüfverfahren - Teil 11-1: Klimatische Prüfungen - Prüfung 11a: Klimafolge (IEC 60512-
11-1:2019)
Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie
11-1: Essais climatiques - Essai 11a - Séquence climatique (IEC 60512-11-1:2019)
Ta slovenski standard je istoveten z: EN IEC 60512-11-1:2019
ICS:
31.220.01 Elektromehanske Electromechanical
komponente (sestavni deli, components in general
gradniki) na splošno
SIST EN IEC 60512-11-1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 60512-11-1:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 60512-11-1:2019


EUROPEAN STANDARD EN IEC 60512-11-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2019
ICS 31.220.01 Supersedes EN 60512-11-1:1999
English Version
Connectors for electrical and electronic equipment - Tests and
measurements - Part 11-1: Climatic tests - Test 11a - Climatic
sequence
(IEC 60512-11-1:2019)
Connecteurs pour équipements électriques et électroniques Elektrisch-mechanische Bauelemente für elektronische
- Essais et mesures - Partie 11-1: Essais climatiques - Einrichtungen - Mess- und Prüfverfahren - Teil 11-1:
Essai 11a - Séquence climatique Klimatische Prüfungen - Prüfung 11a: Klimafolge
(IEC 60512-11-1:2019) (IEC 60512-11-1:2019)
This European Standard was approved by CENELEC on 2019-06-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60512-11-1:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 60512-11-1:2019
EN IEC 60512-11-1:2019 (E)
European foreword
The text of document 48B/2688/CDV, future edition 2 of IEC 60512-11-1, prepared by SC 48B
"Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60512-11-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-03-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-06-20
document have to be withdrawn

This document supersedes EN 60512-11-1:1999.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60512-11-1:2019 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------

SIST EN IEC 60512-11-1:2019
EN IEC 60512-11-1:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all
...