EN IEC 60512-9-5:2020

Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

IEC 60512-9-5:2020 is available as IEC 60512-9-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60512-9-5:2020 when required by the detail product specification, is used for testing connectors or solderless connections within the scope of technical committee 48. It may also be used for similar devices when specified in a detail product specification. The object of this document is to detail a standard method for subjecting solderless connections to thermal stress conditioning by cyclic current loading. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - added method B and renamed the former test method as method A, to provide an alternative with more adjustable time “ON” and “OFF” for products with larger thermal mass. - added introduction to provide background of this revision.

Steckverbinder für elektrische und elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 9-5: Dauerprüfungen - Prüfung 9e: Strombelastung, zyklisch

Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 9-5: Essais d'endurance - Essai 9e: Charge en courant, essai cyclique

IEC 60512-9-5:2020 est disponible sous forme de IEC 60512-9-5:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60512-9-5:2020 est utilisée pour les essais des connecteurs ou des connexions sans soudure du domaine d’activité du comité d’études 48, lorsque la spécification particulière de produit l’exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu’une spécification particulière de produit l'indique. L’objet du présent document est de définir une méthode normalisée pour soumettre les connexions sans soudure à une contrainte thermique appliquée au moyen d’une charge en courant de façon cyclique. Cette deuxième édition annule et remplace la première édition, parue en 2010, dont elle constitue une révision technique. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - introduction de la méthode B pour fournir une alternative avec des durées d'activation et de désactivation ajustables pour les produits de masse thermique plus élevée. L'ancienne méthode devient la méthode A. - ajout d'une introduction pour présenter cette revision.

Konektorji za električno in elektronsko opremo - Preskusi in meritve - 9-5. del: Preskušanje vzdržljivosti - Preskus 9e: Tokovna obremenitev, ciklična (IEC 60512-9-5:2020)

General Information

• Status: Published
• Publication Date: 30-Jul-2020
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-Jul-2020
• Completion Date: 31-Jul-2020
• Ref Project: SIST EN IEC 60512-9-5:2020 - Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2020)

Relations

• Replaces: EN 60512-9-5:2010 - Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
• Effective Date: 27-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2020
Nadomešča:
SIST EN 60512-9-5:2010
Konektorji za električno in elektronsko opremo - Preskusi in meritve - 9-5. del:
Preskušanje vzdržljivosti - Preskus 9e: Tokovna obremenitev, ciklična (IEC 60512-9
-5:2020)
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5:
Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2020)
Steckverbinder für elektrische und elektronische Einrichtungen - Mess- und
Prüfverfahren - Teil 9-5: Dauerprüfungen - Prüfung 9e: Strombelastung, zyklisch (IEC
60512-9-5:2020)
Connecteurs pour équipements electrical et électroniques - Essais et mesures - Partie 9-
5: Essais d'endurance - Essai 9e: Charge en courant, essai cyclique (IEC 60512-9-
5:2020)
Ta slovenski standard je istoveten z: EN IEC 60512-9-5:2020
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60512-9-5

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 31.220.01 Supersedes EN 60512-9-5:2010 and all of its
amendments and corrigenda (if any)
English Version
Connectors for electrical and electronic equipment - Tests and
measurements - Part 9-5: Endurance tests - Test 9e: Current
loading, cyclic
(IEC 60512-9-5:2020)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Essais et mesures - Partie 9-5: Essais d'endurance - Einrichtungen - Mess- und Prüfverfahren - Teil 9-5:
Essai 9e: Charge en courant, essai cyclique Dauerprüfungen - Prüfung 9e: Strombelastung, zyklisch
(IEC 60512-9-5:2020) (IEC 60512-9-5:2020)
This European Standard was approved by CENELEC on 2020-07-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60512-9-5:2020 E

European foreword
The text of document 48B/2803/FDIS, future edition 2 of IEC 60512-9-5, prepared by SC 48B
"Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60512-9-5:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-14
document have to be withdrawn
This document supersedes EN 60512-9-5:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60512-9-5:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60352-1:1997 NOTE Harmonized as EN 60352-1:1997 (not modified)
IEC 60352-2:2006 NOTE Harmonized as EN 60352-2:2006 (not modified)
IEC 60352-3:1993 NOTE Harmonized as EN 60352-3:1994 (not modified)
IEC 60352-4:1994 NOTE Harmonized as EN 60352-4:1994 (not modified)
IEC 60352-5:2012 NOTE Harmonized as EN 60352-5:2012 (not modified)
IEC 60352-6:1997 NOTE Harmonized as EN 60352-6:1997 (not modified)
IEC 60352-7:2002 NOTE Harmonized as EN 60352-7:2002 (not modified)
IEC 60352-8:2011 NOTE Harmonized as EN 60352-8:2011 (not modified)
IEC 60512-14-2:2006 NOTE Harmonized as EN 60512-14-2:2006 (not modified)
IEC 60512-14-4:2006 NOTE Harmonized as EN 60512-14-4:2006 (not modified)
IEC 60512-14-5:2006 NOTE Harmonized as EN 60512-14-5:2006 (not modified)
IEC 60512-14-6:2006 NOTE Harmonized as EN 60512-14-6:2006 (not modified)
IEC 60512-14-7:1997 NOTE Harmonized as EN 60512-14-7:1998 (not modified)
IEC 60529:1989 NOTE Harmonized as EN 60529:1991 (not modified)
IEC 60529:1989/A1:1999 NOTE Harmonized as EN 60529:1991/A1:2000 (not modified)
IEC 60529:1989/A2:2013 NOTE Harmonized as EN 60529:1991/A2:2013 (not modified)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60352 series Solderless connections EN 60352 series
IEC 60512-1 2018 Connectors for electrical and electronic EN IEC 60512-1 2018
equipment - Tests and measurements -
Part 1: Generic specification
IEC 60512-1-1 -  Connectors for electronic equipment - EN 60512-1-1 -
Tests and measurements - Part 1-1:
General examination - Test 1a: Visual
examination
IEC 60512-2-1 -  Connectors for electronic equipment - EN 60512-2-1 -
Tests and measurements - Part 2-1:
Electrical continuity and contact resistance
tests - Test 2a: Contact resistance -
Millivolt level method
IEC 60512-2-2 -  Connectors for electronic equipment - EN 60512-2-2 -
Tests and measurements - Part 2-2:
Electrical continuity and contact resistance
tests - Test 2b: Contact resistance -
Specified test current method
IEC 60512-2-6 -  Connectors for electronic equipment - EN 60512-2-6 -
Tests and measurements - Part 2-6:
Electrical continuity and contact resistance
tests - Test 2f: Housing (shell) electrical
continuity
IEC 60512-3-1 -  Connectors for electronic equipment - EN 60512-3-1 -
Tests and measurements - Part 3-1:
Insulation tests - Test 3a: Insulation
resistance
IEC 60512-4-1 -  Connectors for electronic equipment - EN 60512-4-1 -
Tests and measurements - Part 4-1:
Voltage stress tests - Test 4a: Voltage
proof
IEC 60512-9-5 ®
Edition 2.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electrical and electronic equipment – Tests and measurements –

Part 9-5: Endurance tests – Test 9e: Current loading, cyclic

Connecteurs pour équipements électriques et électroniques –

Essais et mesures –
Partie 9-5: Essais d'endurance – Essai 9e: Charge en courant, essai cyclique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.220.01 ISBN 978-2-8322-8414-8

– 2 – IEC 60512-9-5:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Preparations . 7
4.1 Test equipment . 7
4.2 Preparation of specimens . 7
4.3 Mounting of specimens . 7
5 Test / measuring methods . 7
5.1 Pre-conditioning . 7
5.2 Initial measurements . 7
5.3 Test . 8
5.3.1 General . 8
5.3.2 Method A . 8
5.3.3 Method B . 8
5.4 Recovery . 9
5.5 Final measurements . 9
6 Details to be specified . 10
Bibliography . 11

IEC 60512-9-5:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 9-5: Endurance tests – Test 9e: Current loading, cyclic

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
...