Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

Defines a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 2-2: Prüfungen des elektrischen Durchgangs und Durchgangswiderstands - Prüfung 2b: Durchgangswiderstand - Mit vorgeschriebenem Strom

Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2: Essais de continuité électrique et de résistance de contact - Essai 2b: Résistance de contact - Méthode du courant d'essai spécifié

Définit une méthode d'essai normalisée pour mesurer la résistance électrique d'une paire de contacts accouplés ou d'un contact accouplé avec un calibre de mesure.

Konektorji za elektronsko opremo - Preskusi in meritve - 2-2. del: Preskusi električne prevodnosti in kontaktne upornosti – Preskus 2b: Kontaktna upornost - Metoda z določenim preskuševalnim tokom (IEC 60512-2-2:2003)

General Information

Status
Published
Publication Date
17-Jul-2003
Withdrawal Date
30-Jun-2006
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Completion Date
18-Jul-2003

Buy Standard

Standard
EN 60512-2-2:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60512-2-2:2004

STANDARD
november 2004
Konektorji za elektronsko opremo - Preskusi in meritve - 2-2. del: Preskusi
električne prevodnosti in kontaktne upornosti – Preskus 2b: Kontaktna
upornost - Metoda z določenim preskuševalnim tokom (IEC 60512-2-2:2003)
Connectors for electronic equipment - Tests and measurements - Part 2-2:
Electrical continuity and contact resistance tests - Test 2b: Contact resistance -
Specified test current method (IEC 60512-2-2:2003)
ICS 31.220.10 Referenčna številka
SIST EN 60512-2-2:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60512-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003

ICS 31.220.10


English version


Connectors for electronic equipment -
Tests and measurements
Part 2-2: Electrical continuity and contact resistance tests -
Test 2b: Contact resistance -
Specified test current method
(IEC 60512-2-2:2003)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures Mess- und Prüfverfahren
Partie 2-2: Essais de continuité électrique Teil 2-2: Prüfungen des elektrischen
et de résistance de contact - Durchgangs und Durchgangswiderstands -
Essai 2b: Résistance de contact - Prüfung 2b: Durchgangswiderstand -
Méthode du courant d'essai spécifié Mit vorgeschriebenem Strom
(CEI 60512-2-2:2003) (IEC 60512-2-2:2003)



This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60512-2-2:2003 E

---------------------- Page: 2 ----------------------

EN 60512-2-2:2003 - 2 -
Foreword
The text of document 48B/1321/FDIS, future edition 1 of IEC 60512-2-2, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-2-2 on 2003-07-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01
__________

Endorsement notice

The text of the International Standard IEC 60512-2-2:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE IEC
60512-2-2
INTERNATIONAL
Première édition
STANDARD
First edition
2003-05
Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 2-2:
Essais de continuité électrique et
de résistance de contact –
Essai 2b: Résistance de contact –
Méthode du courant d'essai spécifié
Connectors for electronic equipment –
Tests and measurements –
Part 2-2:
Electrical continuity and contact
resistance tests –
Test 2b: Contact resistance –
Specified test current method
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.