EN 61280-2-5:1998

Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement

Enables the measure of the jitter transfer characteristic of an individual digital equipment as the ratio of the output jitter to the applied input jitter as a function of frequency. Jitter transfer requirements are specified in terms of jitter templates, which cover a specified gain/frequency region.

Lichtwellenleiter-Kommunikationsuntersysteme - Grundlegende Prüfverfahren - Teil 2-5: Prüfverfahren für digitale Systeme - Messung der Jitter-Übertragungsfunktion

Procédures d'essai de base des sous-systèmes de télécommunication à fibres optiques - Partie 2-5: Procédures d'essai des systèmes numériques - Mesure de la fonction transfert de gigue

Permet la mesure du transfert de gigue d'un équipement numérique, la valeur de ce transfert étant définie comme le quotient de la gigue en sortie sur la gigue en entrée, en fonction de la fréquence. Les exigences en matière de transfert de gigue sont spécifiées sous la forme de gabarits recouvrant une zone gain/fréquence définie.

Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement (IEC 61280-2-5:1998)

General Information

• Status: Withdrawn
• Publication Date: 10-Aug-1998
• Withdrawal Date: 30-Apr-2001
• ICS: 33.180.01 - Fibre optic systems in general
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Aug-2012
• Ref Project: SIST EN 61280-2-5:1999 - Fibre optic communication subsystem basic test procedures -- Part 2-5: Test procedures for digital systems - Jitter transfer function measurement

Relations

• Replaced By: EN 61280-2-3:2009 - Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61280-2-5:1999
01-maj-1999
Fibre optic communication subsystem basic test procedures - Part 2-5: Test
procedures for digital systems - Jitter transfer function measurement (IEC 61280-2
-5:1998)
Fibre optic communication subsystem basic test procedures -- Part 2-5: Test procedures
for digital systems - Jitter transfer function measurement
Lichtwellenleiter-Kommunikationsuntersysteme - Grundlegende Prüfverfahren -- Teil 2-5:
Prüfverfahren für digitale Systeme - Messung der Jitter-Übertragungsfunktion
Procédures d'essai de base des sous-systèmes de télécommunication à fibres optiques -
- Partie 2-5: Procédures d'essai des systèmes numériques - Mesure de la fonction
transfert de gigue
Ta slovenski standard je istoveten z: EN 61280-2-5:1998
ICS:
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 61280-2-5:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME
CEI
INTERNATIONALE
IEC
61280-2-5
INTERNATIONAL
Première édition
STANDARD
First edition
1998-05
Procédures d’essai de base des sous-systèmes
de télécommunication à fibres optiques –
Partie 2-5:
Procédures d’essai des systèmes numériques –
Mesure de la fonction transfert de gigue
Fibre optic communication subsystem
basic test procedures –
Part 2-5:
Test procedures for digital systems –
Jitter transfer function measurement
 IEC 1998 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE L
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

61280-2-5 © IEC:1998 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope and object . 7
2 Normative reference . 7
3 Apparatus. 7
4 Test sample. 9
5 Procedure. 9
6 Calculations. 13
7 Test results . 15
Annex A (informative) Jitter terminology information . 19
Annex B (informative) Bibliography . 21

---------------------- Page: 3 ----------------------

61280-2-5 © IEC:1998 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC COMMUNICATION SUBSYSTEM
BASIC TEST PROCEDURES –
Part 2-5: Test procedures for digital systems –
Jitter transfer function measurement
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus o
...