EN IEC 62024-1:2018

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

This part of IEC 62024 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range.

Induktive Hochfrequenz-Bauelemente - Elektrische Eigenschaften und Messmethoden - Teil 1: Chipinduktivitäten im Nanohenry-Bereich

Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de mesure - Partie 1: Inductance à puce de l'ordre du nanohenry

L'IEC 62024-1:2017 spécifie les caractéristiques électriques et les méthodes de mesure pour l'inductance pastille de l'ordre du nanohenry qui est normalement utilisée dans la plage des hautes fréquences (supérieures à 100 kHz). Cette troisième édition annule et remplace la deuxième édition parue en 2008. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
ajout de la méthode de chute de tension pour le mesurage de la résistance en courant continu;
harmonisation des termes techniques.

Visokofrekvenčne induktivne komponente - Električne karakteristike in merilne metode - 1. del: Čipni induktor v območju nanohenrijev

Ta del standarda IEC 62024 določa električne karakteristike in merilne metode za čipovni induktor z nH-območjem, ki se navadno uporablja v visokofrekvenčnem območju (nad 100 kHz).

General Information

• Status: Published
• Publication Date: 08-Mar-2018
• Withdrawal Date: 16-Jan-2021
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Mar-2018
• Completion Date: 09-Mar-2018
• Ref Project: SIST EN IEC 62024-1:2018 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

Relations

• Replaces: EN 62024-1:2008 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
• Effective Date: 25-Oct-2016
• Revised: prEN IEC 62024-1:2023 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
• Effective Date: 18-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62024-1:2018
01-november-2018
1DGRPHãþD
SIST EN 62024-1:2008
9LVRNRIUHNYHQþQHLQGXNWLYQHNRPSRQHQWH(OHNWULþQHNDUDNWHULVWLNHLQPHULOQH
PHWRGHGHOýLSQLLQGXNWRUYREPRþMXQDQRKHQULMHY
High frequency inductive components - Electrical characteristics and measuring methods
- Part 1: Nanohenry range chip inductor
Induktive Hochfrequenz-Bauelemente - Elektrische Eigenschaften und Messmethoden -
Teil 1: Chipinduktivitäten im Nanohenry-Bereich
Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de
mesure - Partie 1: Inductance à puce de l'ordre du nanohenry
Ta slovenski standard je istoveten z: EN IEC 62024-1:2018
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 62024-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62024-1:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62024-1:2018


EUROPEAN STANDARD EN IEC 62024-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 29.100.10 Supersedes EN 62024-1:2008
English Version
High frequency inductive components - Electrical characteristics
and measuring methods - Part 1: Nanohenry range chip inductor
(IEC 62024-1:2017)
Composants inductifs à haute fréquence - Caractéristiques Induktive Hochfrequenz-Bauelemente - Elektrische
électriques et méthodes de mesure - Partie 1: Inductance à Eigenschaften und Messmethoden - Teil 1:
puce de l'ordre du nanohenry Chipinduktivitäten im Nanohenry-Bereich
(IEC 62024-1:2017) (IEC 62024-1:2017)
This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62024-1:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62024-1:2018
EN IEC 62024-1:2018 (E)
European foreword
The text of document 51/1187/CDV, future edition 3 of IEC 62024-1, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62024-1:2018.

The following dates are fixed:
(dop) 2018-10-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-01-17
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62024-1:2008.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62024-1:2017 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 62024-1:2018
EN IEC 62024-1:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (m
...