Reagents for chemical analysis — Part 3: Specifications — Second series

Réactifs pour analyse chimique — Partie 3: Spécifications — Deuxième série

La présente partie de l'ISO 6353 donne des spécifications et indique les méthodes d'essai à utiliser pour vérifier la conformité à ces spécifications d'une deuxième série de réactifs utilisés en chimie analytique, dont la numérotation continue celle de la première série spécifiée dans l'ISO 6353-2. Ce document devra être lu conjointement avec l'ISO 6353-1 qui décrit les méthodes générales d'essai (MG) applicables aux exigences relatives aux spécifications de réactifs et qui donne les informations générales nécessaires pour l'emploi correct de la norme. Il faut accorder une attention particulière à l'ISO 6353-1, chapitre 4, qui décrit la préparation des solutions étalons (SE) aux dilutions I, II et III; des solutions de réactifs (SR); des solutions d'indicateurs (SI). Dans la présente partie de l'ISO 6353, les numéros de référence suivis d'un astérisque renvoient à l'édition de 1982 de l'ISO 6353-1.

Reagenti za kemijsko analizo - 3. del: Specifikacije - Druga serija

General Information

Status
Published
Publication Date
09-Dec-1987
Technical Committee
Drafting Committee
Current Stage
9093 - International Standard confirmed
Completion Date
20-Oct-2023

Buy Standard

Standard
ISO 6353-3:1995
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 6353-3:1987 - Reagents for chemical analysis
English language
75 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6353-3:1987 - Réactifs pour analyse chimique
French language
75 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 6353-3:1987 - Réactifs pour analyse chimique
French language
75 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 6353-3:1995
01-avgust-1995
Reagenti za kemijsko analizo - 3. del: Specifikacije - Druga serija
Reagents for chemical analysis -- Part 3: Specifications -- Second series
Réactifs pour analyse chimique -- Partie 3: Spécifications -- Deuxième série
Ta slovenski standard je istoveten z: ISO 6353-3:1987
ICS:
71.040.30 .HPLþQLUHDJHQWL Chemical reagents
SIST ISO 6353-3:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 6353-3:1995

---------------------- Page: 2 ----------------------

SIST ISO 6353-3:1995
ISO
INTERNATIONAL STANDARD
6353-3
First edition
1987-12-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXAYHAPOaHAfl OPTAHM3A~MFl f-l0 CTAHflAPTM3AuMM
Reagents for Chemical analysis -
Part 3:
Specifications - Second series
Rkactifs pour analyses chimiques -
Partie 3: Sphcifications - DeuxiGme Serie
Reference number
1 ISO 6353-3 : 1987 (E)

---------------------- Page: 3 ----------------------

SIST ISO 6353-3:1995
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 6353-3 was prepared by Technical Committee ISO/TC 47,
Chemistry.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1987
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 6353-3:1995
ISO 6353-3 : 1987 (E)
Contents
Page
1
1 Scope and field of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2 Reagents (abbreviation: R), Specifications - Second series. . . . . . . . . . . . . . . .
Acetic anhydride . 2
R 41
........................... 4
R 42 Ammonium iron( II) sulfate hexahydrate
Ammonium iron(lll) sulfate dodecahydrate . 5
R43
Ammonium nitrate . 6
R44
Ammonium sulfate . 8
R 45
Ammonium thiocyanate . 9
R46
Barium hydroxide octahydrate . 10
R 47
Benzene . 11
R48
12
R 49 2,2’-Bipyridyl. .
Boricacid . 13
R50
14
R 51 Bromine .
1-Butanol, Butyl alcohol. . 15
R 52
Calcium carbonate . 16
R 53
Carbon tetrachloride . 17
R54
Cobalt( II) chloride hexahydrate . 18
R 55
R 56 Diammonium oxalate monohydrate . 19
Dichloromethane . 21
R 57
22
R58 Diethyl ether .
Dimethylformamide . 23
R 59
R60 1,4-Dioxane . 24
Disodium tetraborate decahydrate . 25
R 61
R 62 Ethylacetate . 26
Formaldehyde Solution. . 27
R 63
R64 Glycerol . 28
...................... 30
R 65 Hexaammonium heptamolybdate tetrahydrate.
Hydrobromicacid. . 31
R66
33
R 67 Hydrofluoric acid .
R68 lodine. . 34
..................................... 35
R 69 Iron(ll) sulfate heptahydrate
L-Ascorbic acid . 37
R 70
....................................... 38
R 71 Lead( II) acetate trihydrate
Merc
...

ISO
INTERNATIONAL STANDARD
6353-3
First edition
1987-12-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXAYHAPOaHAfl OPTAHM3A~MFl f-l0 CTAHflAPTM3AuMM
Reagents for Chemical analysis -
Part 3:
Specifications - Second series
Rkactifs pour analyses chimiques -
Partie 3: Sphcifications - DeuxiGme Serie
Reference number
1 ISO 6353-3 : 1987 (E)

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 6353-3 was prepared by Technical Committee ISO/TC 47,
Chemistry.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1987
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO 6353-3 : 1987 (E)
Contents
Page
1
1 Scope and field of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2 Reagents (abbreviation: R), Specifications - Second series. . . . . . . . . . . . . . . .
Acetic anhydride . 2
R 41
........................... 4
R 42 Ammonium iron( II) sulfate hexahydrate
Ammonium iron(lll) sulfate dodecahydrate . 5
R43
Ammonium nitrate . 6
R44
Ammonium sulfate . 8
R 45
Ammonium thiocyanate . 9
R46
Barium hydroxide octahydrate . 10
R 47
Benzene . 11
R48
12
R 49 2,2’-Bipyridyl. .
Boricacid . 13
R50
14
R 51 Bromine .
1-Butanol, Butyl alcohol. . 15
R 52
Calcium carbonate . 16
R 53
Carbon tetrachloride . 17
R54
Cobalt( II) chloride hexahydrate . 18
R 55
R 56 Diammonium oxalate monohydrate . 19
Dichloromethane . 21
R 57
22
R58 Diethyl ether .
Dimethylformamide . 23
R 59
R60 1,4-Dioxane . 24
Disodium tetraborate decahydrate . 25
R 61
R 62 Ethylacetate . 26
Formaldehyde Solution. . 27
R 63
R64 Glycerol . 28
...................... 30
R 65 Hexaammonium heptamolybdate tetrahydrate.
Hydrobromicacid. . 31
R66
33
R 67 Hydrofluoric acid .
R68 lodine. . 34
..................................... 35
R 69 Iron(ll) sulfate heptahydrate
L-Ascorbic acid . 37
R 70
....................................... 38
R 71 Lead( II) acetate trihydrate
Mercury( II) chloride . 39
R 72
R 73 Petroleum spirit 40/60 . 41
........................................... 42
R 74 Phosphorus(V) Oxide
R 75 Potassium bromate . 43
........................................... 44
R 76 Potassium carbonate
Potassium chloride . 46
R 77
48
R 78 Potassiumcyanide .
R 79 Potassium dihydrogen Phosphate . 50
51
R 80 Potassium hexacyanoferrate(II) trihydrate. .
Potassium hexacyanoferrate(III) .
...

ISO
NORME INTERNATIONALE
6353-3
Première édition
1987-12-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXJJYHAPOflHAR OPrAHVl3A~MR IlO CTAH~APTM3A~MM
Réactifs pour analyse chimique -
Partie 3:
Spécifications - Deuxième série
Reagents for chemical analysis -
Part 3: Specifications - Second series
Numéro de référence
ISO 6353-3 : 1987 (F)

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est normalement confiée aux comités techniques de I’ISO.
Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 6353-3 a été élaborée par le comité technique ISO/TC 47,
Chimie.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
@ Organisation internationale de normalisation, 1987 0
imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
60 6353-3 : 1987 (FI
Sommaire
Page
1
1 Objet et domaine d’application . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . . . . . .
1
2 Réactifs (abréviation : R), Spécifications - Deuxiéme série . . . . . . . . . . . . . . . . .
............................................ 2
R 41 Anhydride acétique
.......................... 4
R 42 Ammonium et fer( II) sulfate hexahydraté
....................... 5
Ammonium et fer( Ill) sulfate dodécahydraté
R43
............................................. 6
R44 Ammonium nitrate
............................................ 8
R 45 Ammonium sulfate
9
........................................
R46 Ammonium thiocyanate
.................................. 10
R 47 Baryum hydroxyde octahydraté
11
Benzéne .
R48
................................................. 12
R49 Bipyridyle-2,2’
................................................. 13
Acide borique
R50
15
R 51 Brome .
..................................... 16
Butanol-1, Alcool butylique.
R 52
............................................. 17
Calcium carbonate
R53
.......................................... 18
R54 Carbone tétrachlorure
.................................. 19
Cobalt (1.1) chlorure hexahydraté
R 55
............................... 20
R56 Diammonium oxalate monohydraté
22
Dichlorométhane .
R 57
23
R58 Diéthyleoxyde .
............................................ 25
Diméthylformamide
R59
26
R60 Dioxanne-1,4 .
................................ 27
R 61 Disodium tétraborate décahycraté
28
Éthyleacétate .
R 62
........................................ 29
R63 Formaldéhyde (solution)
30
Glycérol .
R64
...................... 32
R 65 Hexaammonium heptamolybdate tétrahydraté.
........................................... 33
Acide bromhydrique
R66
............................................ 35
R 67 Acide fluorhydrique
36
Iode .
R68
...................................... 37
R69 Fer( II) sulfate heptahydraté
........................................ :. .. 39
R 70 Acide L-ascorbique.
40
.....................................
R 71 Plomb( II) acétate trihydraté
............................................ 41
R 72 Mercure( II) chlorure
.......................................... 43
R 73 Éther de pétrole 40/60
44
...........................................
R 74 Phosphore(V)ox
............................................ 45
R 75 Potassium bromate
........................................... 46
R 76 Potassium carbonate
............................................ 48
R 77 Potassium chlorure
50
.............................................
R 78 Potassiumcyanure
............................... 52
Potassium dihyd
...

ISO
NORME INTERNATIONALE
6353-3
Première édition
1987-12-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXJJYHAPOflHAR OPrAHVl3A~MR IlO CTAH~APTM3A~MM
Réactifs pour analyse chimique -
Partie 3:
Spécifications - Deuxième série
Reagents for chemical analysis -
Part 3: Specifications - Second series
Numéro de référence
ISO 6353-3 : 1987 (F)

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est normalement confiée aux comités techniques de I’ISO.
Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 6353-3 a été élaborée par le comité technique ISO/TC 47,
Chimie.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
@ Organisation internationale de normalisation, 1987 0
imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
60 6353-3 : 1987 (FI
Sommaire
Page
1
1 Objet et domaine d’application . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . . . . . .
1
2 Réactifs (abréviation : R), Spécifications - Deuxiéme série . . . . . . . . . . . . . . . . .
............................................ 2
R 41 Anhydride acétique
.......................... 4
R 42 Ammonium et fer( II) sulfate hexahydraté
....................... 5
Ammonium et fer( Ill) sulfate dodécahydraté
R43
............................................. 6
R44 Ammonium nitrate
............................................ 8
R 45 Ammonium sulfate
9
........................................
R46 Ammonium thiocyanate
.................................. 10
R 47 Baryum hydroxyde octahydraté
11
Benzéne .
R48
................................................. 12
R49 Bipyridyle-2,2’
................................................. 13
Acide borique
R50
15
R 51 Brome .
..................................... 16
Butanol-1, Alcool butylique.
R 52
............................................. 17
Calcium carbonate
R53
.......................................... 18
R54 Carbone tétrachlorure
.................................. 19
Cobalt (1.1) chlorure hexahydraté
R 55
............................... 20
R56 Diammonium oxalate monohydraté
22
Dichlorométhane .
R 57
23
R58 Diéthyleoxyde .
............................................ 25
Diméthylformamide
R59
26
R60 Dioxanne-1,4 .
................................ 27
R 61 Disodium tétraborate décahycraté
28
Éthyleacétate .
R 62
........................................ 29
R63 Formaldéhyde (solution)
30
Glycérol .
R64
...................... 32
R 65 Hexaammonium heptamolybdate tétrahydraté.
........................................... 33
Acide bromhydrique
R66
............................................ 35
R 67 Acide fluorhydrique
36
Iode .
R68
...................................... 37
R69 Fer( II) sulfate heptahydraté
........................................ :. .. 39
R 70 Acide L-ascorbique.
40
.....................................
R 71 Plomb( II) acétate trihydraté
............................................ 41
R 72 Mercure( II) chlorure
.......................................... 43
R 73 Éther de pétrole 40/60
44
...........................................
R 74 Phosphore(V)ox
............................................ 45
R 75 Potassium bromate
........................................... 46
R 76 Potassium carbonate
............................................ 48
R 77 Potassium chlorure
50
.............................................
R 78 Potassiumcyanure
............................... 52
Potassium dihyd
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.