EN 61290-3-2:2003

Optical amplifiers - Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method

Applies to optical fibre amplifiers (OFA) using active fibres, containing rare-earth dopants, presently commercially available.Establishes uniform requirements for accurate and reliable measurements, of the noise figure, as defined in 3.1.17 of EN 61291-1, by means of the electricial spectrum analyzer (ESA) method.

Lichtwellenleiter-Verstärker - Teil 3-2: Prüfverfahren für Rauschzahlparameter - Verfahren mit elektrischem Spektralanalysator

Amplificateurs à fibres optiques - Partie 3-2: Méthodes d'essai pour les paramètres du facteur de bruit - Méthode de l'analyseur spectral électrique

S'applique aux amplificateurs à fibres optiques (AFO) qui utilisent des fibres actives, dopées aux terres rares, qui sont actuellement disponibles sur le marché. Etablit des prescriptions uniformes en vue de mesures précises et fiables du facteur de bruit défini en 3.1.17 de la EN 61291-1, en utilisant la méthode d'essai d'analyseur de spectre électrique (ASE).

Optični ojačevalci – 3-2. del: Preskusne metode za parametre hrupa - Metoda analizatorja električnega spektra (IEC 61290-3-2:2003)*

General Information

• Status: Withdrawn
• Publication Date: 13-Feb-2003
• Withdrawal Date: 31-Jan-2006
• ICS: 33.180.30 - Optic amplifiers
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2011
• Completion Date: 01-Oct-2011
• Ref Project: SIST EN 61290-3-2:2004 - Optical amplifiers -- Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method

Relations

• Replaced By: EN 61290-3-2:2008 - Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter-Verstärker -- Teil 3-2: Prüfverfahren für Rauschzahlparameter - Verfahren mit elektrischem SpektralanalysatorAmplificateurs à fibres optiques -- Partie 3-2: Méthodes d'essai pour les paramètres du facteur de bruit - Méthode de l'analyseur spectral électriqueOptical amplifiers -- Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method33.180.30Optic amplifiersICS:Ta slovenski standard je istoveten z:EN 61290-3-2:2003SIST EN 61290-3-2:2004en01-september-2004SIST EN 61290-3-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARD
EN 61290-3-2 NORME EUROPÉENNE EUROPÄISCHE NORM
February 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61290-3-2:2003 E
ICS 33.180.30
English version
Optical amplifiers Part 3-2: Test methods for noise figure parameters –
Electrical spectrum analyzer method (IEC 61290-3-2:2003)
Amplificateurs à fibres optiques Partie 3-2: Méthodes d'essai
pour les paramètres du facteur de bruit - Méthode de l'analyseur spectral électrique(CEI 61290-3-2:2003)
Lichtwellenleiter-Verstärker Teil 3-2: Prüfverfahren für Rauschzahlparameter –
Verfahren mit elektrischem Spektralanalysator (IEC 61290-3-2:2003)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
Foreword
The text of document 86C/458/FDIS, future edition 1 of IEC 61290-3-2, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61290-3-2 on 2003-02-01.
The following dates were fixed:
– latest date by whic
...