prEN IEC 61557-10:2023

Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment

This part of IEC 61557 specifies the requirements for measuring equipment that combines several measuring functions or methods of testing, measuring or monitoring, that are in accordance with the respective parts of IEC 61557, into one piece of apparatus. Measuring equipment which combines measuring functions or methods of testing, measuring or monitoring covered by the respective parts of IEC 61557 with those not covered by the respective parts of IEC 61557 is also within the scope of this document.

Elektrische Sicherheit in Niederspannungsnetzen bis 1 000 V AC und 1 500 V DC – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen – Teil 10: Kombinierte Messgeräte

Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000 v c.a. et 1 500 v c.c. – Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection – Partie 10: Appareils combinés de contrôle, de mesure et de surveillance de mesures de protection

La présente partie de l'IEC 61557 spécifie les exigences relatives aux appareils de mesure qui combinent en un seul appareil plusieurs fonctions de mesures ou méthodes de contrôle, de mesure ou de surveillance, et qui sont conformes aux parties concernées de l'IEC 61557. Les appareils de mesure qui combinent des fonctions de mesures ou méthodes de contrôle, de mesure ou de surveillance et sont couverts par les parties concernées de l'IEC 61557, ainsi que ceux qui ne sont pas couverts par les parties concernées de l'IEC 61557, sont également inclus dans le domaine d'application du présent document.

Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov - 10. del: Kombinirana merilna oprema

General Information

• Status: Not Published
• Publication Date: 12-Dec-2024
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 29.080.01 - Electrical insulation in general
• ICS: 29.240.01 - Power transmission and distribution networks in general
• Technical Committee: CLC/TC 85X - Measuring equipment for electrical and electromagnetic quantities
• Drafting Committee: IEC/TC 85 - IEC_TC_85
• Current Stage: 6055 - Ratification Completed (DOR) - Publishing
• Start Date: 08-Nov-2024
• Completion Date: 08-Nov-2024
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: oSIST prEN IEC 61557-10:2023 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment

Relations

• Revises: EN 61557-10:2013 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
• Effective Date: 08-Nov-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2023
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti
do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali
nadzorovanje zaščitnih ukrepov - 10. del: Kombinirana merilna oprema
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC -
Equipment for testing, measuring or monitoring of protective measures - Part 10:
Combined measuring equipment
Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000
V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures
de protection - Partie 10: Appareils combinés de mesure
Ta slovenski standard je istoveten z: prEN IEC 61557-10:2023
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.080.01 Električna izolacija na Electrical insulation in
splošno general
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

85/887/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61557-10 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-09-01 2023-11-24
SUPERSEDES DOCUMENTS:
85/848/CD, 85/869/CC
IEC TC 85 : MEASURING EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES
SECRETARIAT: SECRETARY:
China Ms Guiju HAN
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 64,TC 66
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC -
Equipment for testing, measuring or monitoring of protective measures – Part 10: Combined
measuring equipment
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC CDV 61557-10 © IEC: 2023 - 2 - 85/887/CDV

CONTENTS
FOREWORD . - 3 -
1 Scope . - 5 -
2 Normative references . - 5 -
3 Terms and definitions . - 6 -
4 Requirements . - 6 -
4.1 General . - 6 -
4.2 Extraneous overvoltage withstand capability . - 6 -
4.3 Performance after application of extraneous overvoltage . - 7 -
5 Marking and operating instructions . - 7 -
5.1 General . - 7 -
5.2 Pictogram . - 7 -
6 Tests . - 8 -
Bibliography . - 9 -

Table 1 – Extraneous overvoltage . - 7 -

IEC CDV 61557-10 © IEC: 2023 - 3 - 85/887/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO
5 1 000 V AC AND 1 500 V DC – EQUIPMENT FOR TESTING, MEASURING OR
6 MONITORING OF PROTECTIVE MEASURES –
8 Part 10: Combined measuring equipment
11 FOREWORD
12 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
13 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
14 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
15 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
16 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
17 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
18 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
19 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
20 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
21 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
22 consensus of opinion on the relevant subjects since each technical committee has representation from all
23 interested IEC National Committees.
24 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
25 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
26 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
27 misinterpretation by any end user.
28 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
29 transparently to the maximum extent possible in their national and regional publications. Any divergence between
30 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
31 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
32 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
33 services carried out by independent certification bodies.
34 6) All users should ensure that they have the latest edition of this publication.
35 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
36 members of its technical committees and IEC National Committees for any personal injury, property damage or
37 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
38 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
39 Publications.
40 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
41 indispensable for the correct application of this publication.
42 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
43 rights. IEC shall not be held responsible for identifying any or all such patent rights.
44 IEC 61557-10 has been prepared by IEC technical committee: TC85: MEASURING
45 EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES. It is an
46 International Standard.
47 This third edition cancels and replaces the second edition published in 2013. This edition
48 constitutes a technical revision.
49 This edition includes the following significant technical changes with respect to the previous
50 edition:
51 a) .;
52 b)
IEC CDV 61557-10 © IEC: 2023 - 4 - 85/887/CDV
53 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
55 Full information on the voting for its approval can be found in the report on voting indicated in
56 the above table.
57 The language used for the development of this International Standard is English.
58 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
59 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
60 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
61 described in greater detail at www.iec.ch/standardsdev/publications.
62 This International Standard is to be used in conjunction with IEC 61557-1.
63 A list of all parts of the IEC 61557 series, published under the general title Electrical safety in
64 low voltage distrib
...