EN 50368:2003
(Main)Cable cleats for electrical installations
Cable cleats for electrical installations
Superseded by EN 61914:2009
Kabelhalter für elektrische Installationen
Brides de câbles pour installations électriques
Kabelske objemke za električne inštalacije
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 50368:2004
STANDARD
september 2004
Kabelske objemke za električne inštalacije
Cable cleats for electrical installations
ICS 29.120.99 Referenčna številka
SIST EN 50368:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 50368
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003
ICS 29.120.10
English version
Cable cleats for electrical installations
Brides de câbles pour installations Kabelhalter für elektrische Installationen
électriques
This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50368:2003 E
---------------------- Page: 2 ----------------------
EN 50368:2003 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 213, Cable
management.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50368
on 2003-09-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-09-01
Annexes designated "informative" are given for information only.
In this standard, Annexes A and B are informative.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 50368:2003
Contents
Page
1 Scope.4
2 Normative references .4
3 Definitions .4
4 General requirements .6
5 General notes on tests .6
6 Classification.7
7 Marking and documentation.9
8 Construction .9
9 Mechanical properties .10
10 Contribution to fire.13
11 Environmental influences.14
12 Electromagnetic compatibility .14
Figure 1 - Typical arrangement for lateral load test .14
Figure 2 - Unsleeved mandrel .15
Figure 3 - Typical arrangement for impact test .16
Figure 4 - Typical arrangement for short-circuit test .17
Figure 5 -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.