EN 60811-100:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General

IEC 60811-100:2012 describes general requirements and considerations that are applicable to all the test methods given in the particular parts, unless otherwise specified. This first edition of IEC 60811-100 collects together general matters that apply to the restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A provides full information on the relation between the current and the previous series. This revised series of IEC 60811 is based upon the principle of 'one test - one part'. One significant technical change that now applies throughout the series is a defined minimum scheme for the presentation of test reports.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 100: Allgemeines

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 100: Généralités

La CEI 60811-100:2012 décrit les exigences et les considérations générales applicables à toutes les méthodes d'essai données dans les différentes parties, sauf spécification contraire. Cette première édition de la CEI 60811-100 regroupe les aspects généraux qui s'appliquent à la série CEI 60811 restructurée. Une explication détaillée se trouve dans l'Introduction. L'ensemble des informations relatives à la relation entre la présente et l'ancienne série figure dans l'Annexe A. La présente série révisée de la CEI 60811 est fondée sur le principe 'un essai par partie'. Une modification technique significative est apportée dans toute la série, à savoir l'introduction d'un modèle minimum défini pour la présentation des rapports d'essai.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 100. del: Splošno

100. del standarda IEC 60811 opisuje splošne zahteve in dejavnike, ki veljajo za vse preskuševalne metode, navedene v teh delih, razen če je določeno drugače.

General Information

• Status: Published
• Publication Date: 07-Jun-2012
• Withdrawal Date: 15-Apr-2015
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Parallel Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Jun-2012
• Completion Date: 08-Jun-2012
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-100:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General

Relations

• Replaces: EN 60811-2-1:1998/A1:2001 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-3:1995 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-4-1:2004 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-3-2:1995/A2:2004 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-4:1995 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-2-1:1998 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-1:1995 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-3-1:1995/A1:1996 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-4-2:2004 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-4:1995/A2:2001 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-3-1:1995/A2:2001 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-2:1995 - Insulating and sheathing materials of electric cables - Common test methods - Part 1-2: General application - Thermal ageing methods
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-3-1:1995 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-2:1995/A2:2000 - Insulating and sheathing materials of electric cables - Common test methods - Part 1-2: General application - Thermal ageing methods
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-5-1:1999 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60811-100:2012
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO6SORãQR
Electric and optical fibre cables - Test methods for non-metallic materials - Part 100:
General
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 100: Allgemeines
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 100: Généralités
Ta slovenski standard je istoveten z: EN 60811-100:2012
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
SIST EN 60811-100:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60811-100:2012

---------------------- Page: 2 ----------------------

SIST EN 60811-100:2012

EUROPEAN STANDARD
EN 60811-100

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 29.035.01; 29.060.20 Supersedes EN 60811-1-1:1995 (partially) + A1:2001 (partially), EN 60811-1-2:1995 (partially)
+ A2:2000 (partially), EN 60811-1-3:1995 (partially) + A1:2001 (partially), EN 60811-1-4:1995
(partially) + A2:2001 (partially), EN 60811-2-1:1998 (partially) + A1:2001 (partially), EN 60811-
3-1:1995 (partially) + A1:1996 (partially) + A2:2001 (partially), EN 60811-3-2:1995 (partially) +
A2:2004 (partially), EN 60811-4-1:2004 (partially), EN 60811-4-2:2004 (partially), EN 60811-5-
1:1999 (partially) + A1:2004 (partially)

English version

Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 100: General
(IEC 60811-100:2012)


Câbles électriques et à fibres optiques -  Kabel, isolierte Leitungen und
Méthodes d'essai pour les matériaux non- Glasfaserkabel -
métalliques - Prüfverfahren für nichtmetallene
Partie 100: Généralités Werkstoffe -
(CEI 60811-100:2012) Teil 100: Allgemeines
(IEC 60811-100:2012)




This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-100:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60811-100:2012
EN 60811-100:2012 - 2 -
Foreword
The text of document 20/1279/FDIS, future edition 1 of IEC 60811-100, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60811-100:2012.

The following dates are fixed:
(dop) 2013-01-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-04-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60811-1-1:1995 (partially) + A1:2001 (partially), EN 60811-1-2:1995
(partially) + A2:2000 (partially), EN 60811-1-3:1995 (partially) + A1:2001 (partially), EN 60811-1-4:1995
(partially) + A2:2001 (partially), EN 60811-2-1:1998 (partially) + A1:2001 (partially), EN 60811-3-1:1995
(partially) + A1:1996 (partially) + A2:2001 (partially), EN 60811-3-2:1995 (partially) + A2:2004 (partially),
EN 60811-4-1:2004 (partially), EN 60811-4-2:2004 (partially), EN 60811-5-1:1999 (partially) + A1:2004
(partially).
EN 60811-100:2012 collects together general matters that apply to the restructured EN 60811 series. A
detailed explanation is provided in the Introduction. Annex A provides full information on the relation
between the current and the previous ser
...