EN IEC 60794-1-22:2018
(Main)Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
NEW!IEC 60794-1-22:2017 is available as IEC 60794-1-22:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60794-1-22:2017 defines test procedures to be used in establishing uniform requirements for the environmental performance of: - optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and - cables having a combination of both optical fibres and electrical conductors. Throughout this document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements and definitions. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition: - new test method designation F16 – Compound flow (drip) [E14 in IEC 60794-1-21]; - new test method F17 – Cable shrinkage test (fibre protrusion); - new test method F18 – Mid-span temperature cycling test. Keywords: optical fibre cables for use with telecommunication equipment
Lichtwellenleiterkabel - Teil 1-22: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Umweltprüfverfahren
Câbles à fibres optiques - Partie 1-22 : Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essai d’environnement
NEW!IEC 60794-1-22:2017 est disponible sous forme de IEC 60794-1-22:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
Optični kabli - 1-22. del: Splošne specifikacije - Osnovni preskusni postopki za optične kable - Okoljske preskusne metode (IEC 60794-1-22:2017)
Ta del standarda IEC 60794 opredeljuje preskusne postopke, ki jih je treba uporabljati pri določanju enotnih zahtev za okoljsko zmogljivost:
• optičnih kablov, namenjenih za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike; ter
• kablov, sestavljenih iz optičnih vlaken in električnih prevodnikov.
V tem dokumentu lahko izraz »optični kabel« zajema tudi optične enote, mikrokanale za optične enote itd.
Za navodila o preskusnih metodah za vse vrste ter za splošne zahteve in opredelitve glej standard IEC 60794-1-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2018
1DGRPHãþD
SIST EN 60794-1-22:2012
2SWLþQLNDEOLGHO 6SORãQHVSHFLILNDFLMH2VQRYQLSUHVNXVQLSRVWRSNL]D
RSWLþQHNDEOH2NROMVNHSUHVNXVQHPHWRGH ,(&
Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test
procedures - Environmental test methods (IEC 60794-1-22:2017)
Lichtwellenleiterkabel - Teil 1-22: Fachgrundspezifikation - Grundlegende Prüfverfahren
für Lichtwellenleiterkabel - Prüfverfahren zur Umweltprüfung (IEC 60794-1-22:2017)
Câbles à fibres optiques - Partie 1-22 : Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essai d’environnement (IEC
60794-1-22:2017)
Ta slovenski standard je istoveten z: EN IEC 60794-1-22:2018
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60794-1-22
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2018
ICS 33.180.10 Supersedes EN 60794-1-22:2012
English Version
Optical fibre cables - Part 1-22: Generic specification - Basic
optical cable test procedures - Environmental test methods
(IEC 60794-1-22:2017)
Câbles à fibres optiques - Partie 1-22 : Spécification Lichtwellenleiterkabel - Teil 1-22: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essai d'environnement Prüfverfahren zur Umweltprüfung
(IEC 60794-1-22:2017) (IEC 60794-1-22:2017)
This European Standard was approved by CENELEC on 2017-11-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-22:2018 E
European foreword
The text of document 86A/1813/FDIS, future edition 2 of IEC 60794-1-22, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-22:2018.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-08-09
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-11-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60794-1-22:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60794-1-22:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60794-1-2 NOTE Harmonized as EN 60794-1-2.
IEC 60794-1-21 NOTE Harmonized as EN 60794-1-21.
IEC 60794-1-22 NOTE Harmonized as EN 60794-1-22.
IEC 60794-1-23 NOTE Harmonized as EN 60794-1-23.
IEC 60794-1-24 NOTE Harmonized as EN 60794-1-24.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-14 2009 Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60304 - Standard colours for insulation for low- HD 402 S2 -
frequency cables and wires
IEC 60544-1 - Electrical insulating materials - EN 60544-1 -
Determination of the effects of ionizing
radiation -- Part 1: Radiation interaction
and dosimetry
IEC 60793-1-40 - Optical fibres -- Part 1-40: Measurement EN 60793-1-40 -
methods and test procedures - Attenuation
IEC 60793-1-46 - Optical fibres -- Part 1-46: Measurement EN 60793-1-46 -
methods and test procedures - Monitoring
of changes in optical transmittance
IEC 60793-1-54 - Optical fibres -- Part 1-54: Measurement EN 60793-1-54 -
methods and test procedures - Gamma
irradiation
IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic EN 60794-1-1 -
specification - General
IEC 60811-503 - Electric and optical fibre cables - Test EN 60811-503 -
methods for non-metallic materials -- Part
503: Mechanical tests - Shrinkage test for
sheaths
ISO 4892-2 - Plastics - Methods of exposure to EN ISO 4892-2 -
laboratory light sources - Part 2: Xenon-arc
lamps
ISO 4892-3 - Plastics - Methods of exposure to EN ISO 4892-3 -
laboratory light sources - Part 3:
Fluorescent UV lamps
IEC 60794-1-22 ®
Edition 2.0 2017-10
INTERNATIONAL
STANDARD
colour
inside
Optical fibre cables –
Part 1-22: Generic specification – Basic optical cable test procedures –
Environmental test methods
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.10 ISBN 978-2-8322-4864-5
– 2 – IEC 60794-1-22:2017 © IEC 2017
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Method F1 – Temperature cycling . 9
4.1 Object . 9
4.2 Sample . 9
4.3 Apparatus . 10
4.4 Procedure . 10
4.4.1 Initial measurement . 10
4.4.2 Pre-conditioning . 10
4.4.3 Conditioning . 10
4.4.4 Recovery . 13
4.5 Requirements . 13
4.6 Details to be specified . 13
4.7 Details to be reported . 14
5 Method F5 – Water penetration . 14
5.1 Object . 14
5.2 Sample . 14
5.2.1 Method F5A . 14
5.2.2 Method F5B . 14
5.2.3 Method F5C (for cables with swellable water blocking material) . 15
5.3 Apparatus . 15
5.3.1 Test fixtures and set-up . 15
5.3.2 Water . 15
5.3.3 Orifice (method F5C) . 15
5.4 Procedure . 15
5.4.1 Method F5A and F5B . 15
5.4.2 Method F5C . 16
5.5 Requirements . 16
5.6 Details to be specified . 16
5.7 Details to be reported . 16
6 Method F7 – Nuclear radiation . 19
6.1 Object . 19
6.2 Sample . 19
6.3 Apparatus . 19
6.4 Procedure . 19
6.4.1 Fibres . 19
6.4.2 Materials . 19
6.5 Requirements . 19
6.6 Details to be specified . 19
7 Method F8 – Pneumatic resistance . 19
7.1 Object . 19
7.2 Sample . 20
IEC 60794-1-22:2017 © IEC 2017 – 3 –
7.3 Apparatus . 20
7.4 Procedure . 20
7.5 Requirement . 20
7.6 Details to be specified . 20
8 Method F9 – Ageing . 21
8.1 Object . 21
8.2 Sample . 21
8.3 Apparatus . 21
8.4 Procedure . 21
8.5 Requirement .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.