Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-3:2015 is applicable to sub-miniature fuse-links adapted to printed circuits and used for the protection of electric appliances, electronic equipment and component parts thereof, normally intended to be used indoors. It does not apply to sub-miniature fuse-links for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere. This standard applies in addition to the requirements of IEC 60127-1. The object of this standard is to define special and additional test methods for sub-miniature fuse-links applying in addition to the requirements of IEC 60127-1. This third edition of IEC 60127-3 cancels and replaces the first edition published in 1988, its Amendment 1 (1991) and Amendment 2 (2002). This edition includes the following significant technical changes with respect to the previous edition: - add a rectangular shape fuse-link as alternative in standard sheets 3 and 4; - add a small cartridge fuse-link as alternative in standard sheets 2, 3 and 4; - add the rated currents up to 10A in standard sheets 2, 3 and 4; - add Subclause 6.5; - add Subclause 9.7; - the extra samples for termination test (E1 to E6) will be chosen by random and not sorted by voltage drop in Table 1, 2, 3, and 4. Keywords: sub-miniature fuse-links adapted to printed circuits, protection of electric appliances, electronic equipment and component parts This publication is to be read in conjunction with IEC 60127-1:2006.

Geräteschutzsicherungen - Teil 3: Kleinstsicherungseinsätze

Coupe-circuit miniatures - Partie 3: Éléments de remplacement subminiatures

L'IEC 60127-3:2015 est applicable à tous les éléments de remplacement subminiatures adaptés aux circuits imprimés et utilisés pour la protection d'appareils électriques, de matériels électroniques et de leurs éléments constitutifs, normalement destinés à être utilisés à l'intérieur de bâtiments. Elle n'est pas applicable aux éléments de remplacement subminiatures pour les appareils destinés à être utilisés dans des conditions particulières, telles que les atmosphères corrosives ou explosives. La présente norme s'applique en plus des exigences de l'IEC 60127-1. L'objet de la présente norme est de définir des méthodes d'essai particulières et supplémentaires applicables aux éléments de remplacement subminiatures, celles-ci venant s'ajouter aux exigences de l'IEC 60127-1. Cette troisième édition de l'IEC 60127-3 annule et remplace la première édition parue en 1988, son amendement 1 (1991) et l'amendement 2 (2002). La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout d'une forme rectangulaire de fusible comme solution alternative dans les feuilles de normes 3 et 4; - ajout d'une petite cartouche comme solution alternative dans les feuilles de normes 2, 3 et 4; - ajout de courants nominaux jusqu'à 10 A dans les feuilles de normes 2, 3 et 4; - ajout du paragraphe 6.5; - ajout du paragraphe 9.7; - les échantillons supplémentaires pour l'essai de sortie (E1 à E6) seront choisis par hasard et non par ordre de chute de tension dans les Tableaux 1, 2, 3, et 4. Mots clés: les éléments de remplacement subminiatures adaptés aux circuits imprimés, la protection d'appareils électriques, de matériels électroniques et de leurs éléments constitutifs Cette publication doit être lue conjointement avec la CEI 60127-1:2006.

Miniaturne varovalke - 3. del: Subminiaturni taljivi vložki (IEC 60127-3:2015)

Ta del standarda IEC 60127 se uporablja za subminiaturne taljive vložke, ki so prilagojeni tiskanim vezjem in se uporabljajo za zaščito električnih naprav in elektronske opreme ter njihovih sestavnih delov, ki so običajno namenjeni za uporabo v zaprtih prostorih. Ne velja za subminiaturne taljive vložke za naprave, namenjene za uporabo pod posebnimi pogoji, na primer v korozivnem ali eksplozivnem ozračju. Ta standard se poleg tega uporablja za zahteve iz standarda IEC 60127-1.
Cilj tega standarda je opredeliti posebne in dodatne preskusne postopke za subminiaturne taljive vložke, ki se uporabljajo skupaj z zahtevami standarda IEC 60127-1.

General Information

Status
Published
Publication Date
26-Feb-2015
Withdrawal Date
23-Feb-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
27-Feb-2015
Completion Date
27-Feb-2015

Relations

Buy Standard

Standard
EN 60127-3:2015
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60127-3:2015
01-maj-2015
1DGRPHãþD
SIST EN 60127-3:1999/A2:2004
Miniaturne varovalke - 3. del: Subminiaturni taljivi vložki (IEC 60127-3:2015)
Miniature fuses - Part 3: Sub-miniature fuse-links (IEC 60127-3:2015)
Geräteschutzsicherungen - Teil 3: Kleinstsicherungseinsätze (IEC 60127-3:2015)
Coupe-circuit miniatures - Partie 3: Eléments de remplacement subminiatures (IEC
60127-3:2015)
Ta slovenski standard je istoveten z: EN 60127-3:2015
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 60127-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60127-3:2015

---------------------- Page: 2 ----------------------

SIST EN 60127-3:2015


EUROPEAN STANDARD EN 60127-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 29.120.50 Supersedes EN 60127-3:1996
English Version
Miniature fuses - Part 3: Sub-miniature fuse-links
(IEC 60127-3:2015)
Coupe-circuit miniatures - Partie 3: Éléments de Geräteschutzsicherungen - Teil 3:
remplacement subminiatures Kleinstsicherungseinsätze
(IEC 60127-3:2015) (IEC 60127-3:2015)
This European Standard was approved by CENELEC on 2015-02-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60127-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60127-3:2015
EN 60127-3:2015 - 2 -
Foreword
The text of document 32C/501/FDIS, future edition 3 of IEC 60127-3, prepared by SC 32C "Miniature
fuses" of IEC/TC 32 "Fuses" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60127-3:2015.

The following dates are fixed:
(dop) 2015-11-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-02-24
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60127-3:1996.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60127-3:2015 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60127-3:2015
- 3 - EN 60127-3:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60068-2-21 -  Environmental testing -- Part 2-21: Tests - EN 60068-2-21 -
Test U: Robustness of terminations and
integral mounting devices
IEC 60127-1 2006 Miniature fuses -- Part 1: Definitions for EN 60127-1 2006
miniature fuses and general require
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.