EN 60127-1:2006
(Main)Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
This part of IEC 60127 covers the general requirements and tests applicable to all types of miniature fuse-links (e.g. cartridge fuse-links, sub-miniature fuse-links and universal modular fuse-links) for the protection of electric appliances, electronic equipment and component parts thereof normally intended to be used indoors.
Geräteschutzsicherungen - Teil 1: Begriffe für Geräteschutzsicherungen und allgemeine Anforderungen an G-Sicherungseinsätze
Coupe-circuit miniatures - Partie 1: Définitions pour coupe-circuit miniatures et prescriptions générales pour éléments de remplacement miniatures
Miniaturne varovalke - 1. del: Definicije za miniaturne varovalke in splošne zahteve za miniaturne taljive vložke (IEC 60127-1:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60127-1:2007
STANDARD
januar 2007
Miniaturne varovalke - 1. del: Definicije za miniaturne varovalke in splošne
zahteve za miniaturne taljive vložke (IEC 60127-1:2006)
(istoveten EN 60127-1:2006)
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements
for miniature fuse-links (IEC 60127-1:2006)
ICS 29.120.50 Referenčna številka
SIST EN 60127-1:2007(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60127-1
NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM
ICS 29.120.50 Supersedes EN 60127-1:1991 + A1:1999 + A2:2003
English version
Miniature fuses
Part 1: Definitions for miniature fuses and
general requirements for miniature fuse-links
(IEC 60127-1:2006)
Coupe-circuit miniatures Geräteschutzsicherungen
Partie 1: Définitions pour coupe-circuit Teil 1: Begriffe für
miniatures et prescriptions générales pour Geräteschutzsicherungen und
éléments de remplacement miniatures allgemeine Anforderungen an
(CEI 60127-1:2006) G-Sicherungseinsätze
(IEC 60127-1:2006)
This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60127-1:2006 E
---------------------- Page: 2 ----------------------
EN 60127-1:2006 - 2 -
Foreword
The text of document 32C/387/FDIS, future edition 2 of IEC 60127-1, prepared by SC 32C, Miniature
fuses, of IEC TC 32, Fuses, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60127-1 on 2006-07-01.
This European Standard supersedes EN 60127-1:1991 + A1:1999 + A2:2003.
The major technical changes concern Subclause 9.2.3 where the nature of the current source has been
clarified; in addition, IEC 60038: IEC standard voltages, has been added to the list of normative
references.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60127-1:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60062 NOTE Harmonized as EN 60062:2005 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60127-1:2006
Annex ZA
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2) 3)
IEC 60038 (mod) - IEC standard voltages HD 472 S1 1989
+ corr. February 2002
+ A1 1995
IEC 60127-6 1994 Miniature fuses EN 60127-6 1994
+ A1 1996 Part 6: Fuse-holders for miniature fuse-links + A1 1996
+ A2 2002 + A2 2003
1)
Undated reference.
2)
The title of HD 472 S1 i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.