EN IEC 61300-2-2:2026
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
General Information
- Abstract
This part of IEC 61300 evaluates the effects of a number of successive cycles of mating and un-mating of fibre optic connectors or other interconnecting devices on optical performance and mechanical degradation of the component under normal usage conditions.
- Status
- Published
- Publication Date
- 10-Sep-2026
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 11-Sep-2026
- Due Date
- 30-Jun-2026
- Completion Date
- 11-Sep-2026
Overview
EN IEC 61300-2-2:2026 specifies the mating durability test methods for fibre optic interconnecting devices and passive components. Developed by CLC and IEC, this international standard provides essential procedures for assessing the mechanical and optical performance of fibre optic connectors, adapters, and related passive components subjected to repeated cycles of mating and un-mating. The goal is to ensure reliable performance and durability of fibre optic connections in real-world applications.
Consistent application of mating durability tests is critical as fibre optic networks expand in complexity and scale. This standard helps manufacturers, network operators, and quality assurance professionals verify that devices can withstand the physical stress and potential degradation resulting from frequent handling and connector usage.
Key Topics
- Purpose of Mating Durability Testing: Evaluates the effects of repeated mating/un-mating on optical and mechanical performance of components under typical conditions.
- Test Configurations: Includes both plug-adapter-plug and plug-socket connector arrangements, reflecting common use cases in fibre optic infrastructure.
- Test Apparatus and Conditions: Specifies appropriate fixtures, manual or alternative force application methods, and measurement protocols.
- Measurement of Performance: Attenuation and return loss are monitored throughout cycles using equipment as per IEC 61300-3-3.
- Cleaning and Inspection Criteria: Provides guidance on connector inspection, cleaning intervals, and procedures during testing (referencing IEC TR 62627-01).
- Severity Levels: Introduces performance categories with defined test cycles for connectors and passive components, including hardened connectors.
- Reporting Requirements: Outlines essential reporting elements, such as coupling mechanisms, severity level, initial and final performance, cleaning occurrences, and deviations from standard procedures.
Applications
EN IEC 61300-2-2:2026 is particularly valuable in:
- Fibre Optic Component Manufacturing: Ensures products meet required durability and performance benchmarks, supporting quality control and market acceptance.
- Telecom and Data Network Deployment: Assists installers and operators in selecting connectors proven to endure repeated handling without compromising network reliability.
- Compliance and Testing Laboratories: Enables verification processes according to internationally recognized standards, enhancing credibility for tested products.
- R&D and Product Development: Guides engineers in the design and evaluation of new connector types and passive components to ensure robust long-term field performance.
Implementing this standard in product testing protocols minimizes the risk of network downtime and costly connector failures.
Related Standards
For comprehensive fibre optic component evaluation, EN IEC 61300-2-2:2026 should be considered alongside:
- IEC 61300-3-1: Visual examination of fibre optic connectors and components.
- IEC 61300-3-3: Procedures for monitoring changes in attenuation and return loss.
- IEC 61753 Series: Performance standards for fibre optic interconnecting devices and passive components.
- IEC 62005 Series: Reliability standards for fibre optic components.
- IEC TR 62627-01: Guidelines on cleaning fibre optic connectors for optimal optical performance.
Applying these related standards with EN IEC 61300-2-2:2026 ensures a holistic approach to testing, reliability assessment, and performance validation in fibre optic systems.
Keywords: fibre optic mating durability, connector reliability, EN IEC 61300-2-2:2026, passive components, optical performance testing, connector cycling, test standards, CLC, IEC, telecommunications, network infrastructure, measurement procedures.
Relations
- Effective Date
- 12-Dec-2023
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 11-Aug-2026
- Effective Date
- 15-Sep-2026
- Effective Date
- 15-Sep-2026
- Effective Date
- 15-Sep-2026
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
EN IEC 61300-2-2:2026 is a standard published by CLC. Its full title is "Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability". This standard covers: This part of IEC 61300 evaluates the effects of a number of successive cycles of mating and un-mating of fibre optic connectors or other interconnecting devices on optical performance and mechanical degradation of the component under normal usage conditions.
This part of IEC 61300 evaluates the effects of a number of successive cycles of mating and un-mating of fibre optic connectors or other interconnecting devices on optical performance and mechanical degradation of the component under normal usage conditions.
EN IEC 61300-2-2:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.20 - Fibre optic interconnecting devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN IEC 61300-2-2:2026 has the following relationships with other standards: It is inter standard links to EN 61300-2-2:2009, EN IEC 61753-021-06:2023, EN 61300-3-1:2005, EN IEC 61300-1:2022, EN 62005-4:1999, EN IEC 61753-021-02:2023, EN IEC 61753-021-03:2026, EN 61300-3-3:2009, EN 62005-7:2004, EN 62005-2:2001, EN 62005-1:2001, EN 62005-3:2001, EN 50377-3-1:2008, EN 50377-10-1:2007, EN 50377-11-1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN IEC 61300-2-2:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2026
Nadomešča:
SIST EN 61300-2-2:2009
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-2. del: Preskusi - Mehanično trajanje (IEC 61300-2-2:2026)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-2: Tests - Mating durability (IEC 61300-2-2:2026)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-2: Prüfungen - Garantierte minimale Steckzyklenanzahl (IEC
61300-2-2:2026)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-2: Essais - Durabilité de l'accouplement
(IEC 61300-2-2:2026)
Ta slovenski standard je istoveten z: EN IEC 61300-2-2:2026
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61300-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2026
ICS 33.180.20 Supersedes EN 61300-2-2:2009; EN 61300-2-
2:2009/corrigendum May 2009
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-2: Tests -
Mating durability
(IEC 61300-2-2:2026)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-
mesures - Partie 2-2: Essais - Durabilité de l'accouplement 2: Prüfungen - Garantierte minimale Steckzyklenanzahl
(IEC 61300-2-2:2026) (IEC 61300-2-2:2026)
This European Standard was approved by CENELEC on 2026-08-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-2-2:2026 E
European foreword
The text of document 86B/5225/FDIS, future edition 4 of IEC 61300-2-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-2:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-09-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-09-30
document have to be withdrawn
This document supersedes EN 61300-2-2:2009 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-2-2:2026 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-1 - Fibre optic interconnecting devices and EN IEC 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures - Part 3-1:
Examinations and measurements - Visual
examination
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61753 series Fibre optic interconnecting devices and EN IEC 61753 series
passive components - Performance
standard
IEC 62005 series Reliability of fibre optic interconnecting EN 62005 series
devices and passive components
IEC 61300-2-2 ®
Edition 4.0 2026-07
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability
ICS 33.180.20 ISBN 978-2-8327-1374-7
IEC 61300-2-2:2026-07(en)
IEC 61300-2-2:2026 © IEC 2026
CONTENTS
FOREWORD . 2
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General description . 4
5 Apparatus . 4
5.1 Fixture . 4
5.2 Application of force . 5
5.3 Measuring equipment . 5
6 Procedure . 5
6.1 Preconditioning . 5
6.2 Initial inspection . 5
6.3 Cycling . 5
6.4 Measurements . 6
6.4.1 General . 6
6.4.2 Measurement and cleaning conditions . 6
6.4.3 Final examinations and measurements . 6
7 Severity . 6
8 Details to be specified and reported . 7
Bibliography . 8
Figure 1 – Mating durability test for a plug-adaptor-plug configuration . 5
Figure 2 – Mating durability test for a plug-receptacle configuration . 5
Table 1 – Recommended severity values . 6
IEC 61300-2-2:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-2: Tests - Mating durability
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible f
...