iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60730-2-2:1991

(Main)

Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors

Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors

Applies to the partial evaluation of thermal motor protectors and their inherent safety. Applies also to thermal motor protectors within the scope of EN 60335-1.

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2: Besondere Anforderungen an thermisch wirkende Motorschutzeinrichtungen

Dispositifs de commande électrique automatiques à usage domestique et analogue - Partie 2: Règles particulières pour les dispositifs thermiques de protection des moteurs

S'applique à l'évaluation partielle des dispositifs thermiques de protection des moteurs ainsi qu'à leur sécurité intrinsèque et les dispositifs thermiques de protection des moteurs entrant dans le domaine d'application de la EN 60335-1.

Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors (IEC 730-2-2:1990, modified)

General Information

Status
Withdrawn
Publication Date
21-Oct-1991
Withdrawal Date
31-Dec-1995
ICS
97.120 - Automatic controls for household use
Technical Committee
CLC/TC 72 - Automatic controls for household use
Drafting Committee
IEC/TC 72 - IEC_TC_72
Parallel Committee
IEC/TC 72 - IEC_TC_72
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2009
Completion Date
01-Mar-2009
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60730-2-2:1995 - Automatic electrical controls for household and similar use -- Part 2: Particular requirements for thermal motor protectors

Relations

Replaced By
EN 60730-2-2:2002 - Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors
Effective Date
29-Jan-2023
Amended By
EN 60730-2-2:1991/A1:1997 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors
Effective Date
29-Jan-2023
Amended By
EN 60730-2-2:1991/A11:1995 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors
Effective Date
28-Jan-2023
Amended By
EN 60730-2-2:1991/A2:1997 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors
Effective Date
28-Jan-2023

Buy Standard

EN 60730-2-2:1995EN 60730-2-2:1995
PreviousNext
Standard
EN 60730-2-2:1995
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60730-2-2:1995
01-avgust-1995
Automatic electrical controls for household and similar use - Part 2: Particular
requirements for thermal motor protectors (IEC 730-2-2:1990, modified)
Automatic electrical controls for household and similar use -- Part 2: Particular
requirements for thermal motor protectors
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen -- Teil 2: Besondere Anforderungen an thermisch wirkende
Motorschutzeinrichtungen
Dispositifs de commande électrique automatiques à usage domestique et analogue --
Partie 2: Règles particulières pour les dispositifs thermiques de protection des moteurs
Ta slovenski standard je istoveten z: EN 60730-2-2:1991
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN 60730-2-2:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 2 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 3 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 4 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 5 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 6 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 7 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 8 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 9 ----------------------

SIST EN 60730-2-2:1995

---------------------- Page: 10 ----------------------

SIST EN 60730-2-2:1995

-------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60730-2-14:2019/A1:2022(Amendment)
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
SIST EN IEC 60730-2-14:2019/A1:2024
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-1:2016/A2:2022(Amendment)
Automatic electrical controls - Part 1: General requirements
SIST EN 60730-1:2016/A2:2022

2022-04-07: This EN has no DOW.
NEXT ACTION: TC ACTION by 2022-06-01
2021-12-16: DOW removed from A1 further to  D170/C058. Mother EN has no DOW (justification in foreword)
2021-09-24: prAA including common mods to this A2 will be presented soon to BT
NEXT ACTION: TC ACTION by 2021-12-01
2020-08-19: NEXT ACTION BY TC: to deliver Annexes for FV assessment.

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-8:2020/A1:2021(Amendment)
Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
SIST EN IEC 60730-2-8:2021/A1:2022

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-14:2019/A2:2021(Amendment)
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
SIST EN IEC 60730-2-14:2019/A2:2022
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-2-5:2015/A2:2021(Amendment)
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
SIST EN 60730-2-5:2015/A2:2021

2020-01-16 PeC: Annexes ZZ for LVD and EMC are pending on part 1

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-9:2019/A2:2020(Amendment)
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
SIST EN IEC 60730-2-9:2019/A2:2020

2019-03-19: to contact PM before proceeding with any assessment request.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60730-2-6:2016/A1:2020(Amendment)
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
SIST EN 60730-2-6:2016/A1:2021

NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2020-03
2020-01-17 PeC: to pe published un-harmonized
2019-12-12 PeC: DOW to be set to DOR + 36 months
2019-10-23 PC: submission pending on the result of Part1
2019-06-13 PC: TC to updade EMC and LVD Annex ZZ
2019-03-19: to contact PM before proceeding with any assessment request.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-8:2020(Main)
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
SIST EN IEC 60730-2-8:2021

NEW!IEC 60730-2-8:2018 is available as IEC 60730-2-8:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-8:2018 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use, including heating, air-conditioning and similar applications. The equipment can use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This document is applicable to electrically operated water valves for building automation within the scope of ISO 16484. This document also applies to automatic electrically operated water valves for equipment that can be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This document does not apply to electrically operated water valves intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This document applies to electrically operated water valves powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V. This document does not cover the prevention of contamination of drinking water as a result of contact with materials. This document applies to the inherent safety, to the operating values, operating times and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical control devices used in, on or in association with, household and similar equipment. This document contains requirements for electrical features of water valves and requirements for mechanical features of valves that affect their intended operation. This document is also applicable to electrically operated water valves for appliances within the scope of the IEC 60335 series of standards. This document does not apply to: - electrically operated water valves of nominal connection size above DN 50; - electrically operated water valves for admissible nominal pressure rating above 1,6 MPa; - food dispensers; - detergent dispensers; - steam valves; - electrically operated water valves designed exclusively for industrial applications. This document applies to electrically operated water valves, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof. This document also applies to actuators and to valve bodies which are designed to be fitted to each other. This document applies to individual valves, valves utilized as part of a system and valves mechanically integral with multi-functional controls having non-electrical outputs. This document applies to AC or DC powered electrically operated water valves with a rated voltage not exceeding 690 V AC or 600 V DC. This document does not take into account the response value of an automatic action of a valve, if such a response value is dependent upon the method of mounting the valve in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. This document applies also to electrically operated water valves incorporating electronic devices, requirements for which are contained in

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-7:2020(Main)
Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches
SIST EN IEC 60730-2-7:2021

IEC 60730-2-7:2015(E) applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outputs. This standard does not apply to time-delay switches (TDS) within the scope of IEC 60669-2-3. This standard applies to the inherent safety, to the operating characteristics where such are associated with equipment protection and to the testing of timers used in appliances and other apparatus, electrical and non-electrical, for household and similar purposes, but also extended to industrial purposes when no dedicated product standards exist, such as that for central heating, air conditioning, process heating, etc. Timers for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This third edition cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. This new edition revises the compliance criteria of type 1.S and 2.S action, revises the requirements for filament lamp loads, adds requirements for abnormal operation in Annex H, removes some special requirements for single countries as well as updates the standard to IEC 60730-1:2010, fourth edition. Key words: Timers, Time Switches

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60730-2-11:2020(Main)
Automatic electrical controls - Part 2-11: Particular requirements for energy regulators
SIST EN IEC 60730-2-11:2021

IEC 60730-2-11:2019 is available as IEC 60730-2-11:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word “equipment” means “appliance and equipment”. This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to equipment that are specifically within the scope of building automation equipment. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision to the title to remove “for household and similar use”; b) changes to the scope and related modifications; c) changes to definitions in Annex H. This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1. Keywords: Automatic Controls, Energy Regulators, Control Systems

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day