EN IEC 62442-1:2022

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear

IEC 62442-1:2022 is available as IEC 62442-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62442-1:2022 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency of the lamp controlgear is also defined. This document applies to electrical controlgear-lamp circuits consisting only of the controlgear and the lamp(s). It is intended for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This third edition cancels and replaces the second edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - this edition has been harmonized with IEC 62442-2 and IEC 62442­-3; - the reference to and use of the measurement methods for non-active power consumption in accordance with IEC 63103 have been added.

Energieeffizienz von Lampenbetriebsgeräten - Teil 1: Betriebsgeräte für Leuchtstofflampen - Messverfahren zur Bestimmung der Gesamteingangsleistung von Betriebsgeräteschaltungen und des Wirkungsgrades von Betriebsgeräten

Performance énergétique des appareillages de lampes - Partie 1 : Appareillages des lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages

IEC 62442-1:2022 est disponible sous forme de IEC 62442-1:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62442-1:2022 définit une méthode de mesurage et de calcul de la puissance d'entrée totale pour les circuits appareillage-lampe qui fonctionnent avec la ou les lampes à fluorescence qui leur sont associées. La méthode de calcul du rendement des appareillages de lampes est également définie. Le présent document s'applique aux circuits appareillage-lampe électriques constitués exclusivement de l'appareillage et de la ou des lampes. Il s'applique aux alimentations en courant continu jusqu'à 1 000 V et/ou aux alimentations en courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz. Cette troisième édition annule et remplace la deuxième édition parue en 2018. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - cette édition a été harmonisée avec l'IEC 62442-2 et l'IEC 62442-3; - des références à l'IEC 63103 ont été ajoutées afin d'appliquer les méthodes de mesurage de la consommation de puissance en mode non actif. La version française de cette norme n'a pas été soumise au vote.

Energijske lastnosti krmilne naprave sijalke - 1. del: Krmilna naprava za fluorescenčne sijalke - Merilna metoda za ugotavljanje celotne vhodne moči krmilnih vezij in izkoristka krmilne naprave (IEC 62442-1:2022)

Ta del standarda IEC 62442 določa metodo za meritev in izračun celotne vhodne moči krmilnih vezij sijalk, kadar delujejo s fluorescenčnimi sijalkami. Opredeljena je tudi računska metoda za izkoristek krmilne naprave. Ta dokument se uporablja za električna krmilna vezja sijalk, ki jih sestavljajo le krmilna naprava in sijalke. Namenjen je za uporabo z enosmerno napajalno napetostjo do vključno 1000 V in/ali izmenično napajalno napetostjo do vključno 1000 V pri frekvenci 50 Hz ali 60 Hz. OPOMBA: Zahteve za preskušanje posameznih delov krmilne opreme med proizvodnjo niso vključene. Ta dokument določa merilno metodo za skupno vhodno moč in metodo za izračun učinkovitosti krmilnih naprav za vse krmilne naprave, ki se uporabljajo za domačo uporabo in običajne komercialne namene ter delujejo z naslednjimi fluorescenčnimi sijalkami: – fluorescenčne sijalke z dvema vznožkoma (IEC 60081); – fluorescenčne sijalke z enim vznožkom (IEC 60901); – ostale nizkotlačne živosrebrne fluorescenčne sijalke za splošne namene. Ta dokument se ne uporablja za: – krmilno napravo, ki je sestavni del sijalke; – krmiljeno magnetno krmilno napravo z žičnim navitjem.

General Information

• Status: Published
• Publication Date: 24-Mar-2022
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 25-Mar-2022
• Completion Date: 25-Mar-2022
• Ref Project: SIST EN IEC 62442-1:2022 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (IEC 62442-1:2022)

Relations

• Replaces: EN IEC 62442-1:2018 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
• Effective Date: 29-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2022
Nadomešča:
SIST EN IEC 62442-1:2019
Energijske lastnosti krmilne naprave sijalke - 1. del: Krmilna naprava za
fluorescenčne sijalke - Merilna metoda za ugotavljanje celotne vhodne moči
krmilnih vezij in izkoristka krmilne naprave (IEC 62442-1:2022)
Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps -
Method of measurement to determine the total input power of controlgear circuits and the
efficiency of controlgear (IEC 62442-1:2022)
Energieeffizienz von Lampenbetriebsgeräten - Teil 1: Betriebsgeräte für
Leuchtstofflampen - Messverfahren zur Bestimmung der Gesamteingangsleistung von
Betriebsgeräteschaltungen und des Wirkungsgrades von Betriebsgeräten (IEC 62442-
1:2022)
Performance énergétique des appareillages de lampes - Partie 1 : Appareillages des
lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance
d'entrée totale des circuits d'appareillage et du rendement des appareillages (IEC 62442
-1:2022)
Ta slovenski standard je istoveten z: EN IEC 62442-1:2022
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62442-1

NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 29.140.99 Supersedes EN IEC 62442-1:2018 and all of its
amendments and corrigenda (if any)
English Version
Energy performance of lamp controlgear - Part 1: Controlgear for
fluorescent lamps - Method of measurement to determine the
total input power of controlgear circuits and the efficiency of
controlgear
(IEC 62442-1:2022)
Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 1:
Partie 1 : Appareillages des lampes à fluorescence - Betriebsgeräte für Leuchtstofflampen - Messverfahren zur
Méthode de mesurage pour la détermination de la Bestimmung der Gesamteingangsleistung von
puissance d'entrée totale des circuits d'appareillage et du Betriebsgeräteschaltungen und des Wirkungsgrades von
rendement des appareillages Betriebsgeräten
(IEC 62442-1:2022) (IEC 62442-1:2022)
This European Standard was approved by CENELEC on 2022-03-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62442-1:2022 E

European foreword
The text of document 34C/1545/FDIS, future edition 3 of IEC 62442-1, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62442-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-03-16
document have to be withdrawn
This document supersedes EN IEC 62442-1:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62442-1:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62442-2 NOTE Harmonized as EN IEC 62442-2
IEC 62442-3 NOTE Harmonized as EN IEC 62442-3
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-845 - International Electrotechnical Vocabulary - -
(IEV) – Part 845: Lighting
IEC 60081 1997 Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
+ A4 2010  + A4 2010
- -  + A11 2018
IEC 60901 1996 Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
+ A5 2011  + A5 2012
IEC 60921 2004 Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
IEC 60929 2011 AC and/or DC-supplied electronic control EN 60929 2011
gear for tubular fluorescent lamps -
Performance requirements
- -  + AC 2011
IEC 63103 2020 Lighting equipment - Non-active mode EN IEC 63103 2020
power measurement
IEC TS 63105  Lighting systems and related equipment - - -
Vocabulary
IEC 62442-1 ®
Edition 3.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Energy performance of lamp controlgear –

Part 1: Controlgear for fluorescent lamps – Method of measurement to

determine the total input power of controlgear circuits and the efficiency of

controlgear
Performance énergétique des appareillages de lampes –

Partie 1: Appareillages des lampes à fluorescence – Méthode de mesurage pour

la détermination de la puissance d'entrée totale des circuits d'appareillage et du

rendement des appareillages
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-1077-0

– 2 – IEC 62442-1:2022 © IEC 2022
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 9
4.1 Ballast lumen factor . 9
4.2 Dimmable controlgear . 10
4.3 Multi-power and/or multi-number-lamp controlgear . 10
4.4 General notes on tests . 10
4.5 Sampling of controlgear for testing . 10
4.6 Size of the test sample. 10
4.7 Conditioning of lamps . 10
4.8 Test voltages and frequencies . 10
4.9 Sensor and network connections . 11
5 Method of measurement and calculation of total input power of controlgear-lamp
circuits and the efficiency of controlgear . 11
5.1 Correction for ballast lumen factor . 11
5.2 Method of measurement . 11
5.3 Measurement and calculation of the total input power of magnetic
controlgear-lamp circuits . 12
5.4 Calculation of the efficiency of electromagnetic controlgear . 12
5.5 Measurement and calculation of the total input power of electronic
controlgear-lamp circuits . 12
5.6 Calculation of the efficiency of electronic controlgear . 14
5.7 Measuring the standby power . 14
5.8 Measuring the networked standby power . 14
5.9 Reporting of power measurements . 14
Annex A (normative) Energy performance measurement set-up . 15
A.1 Measurement set-up for electromagnetic controlgear . 15
A.2 Measurement set-up for electronic controlgear . 15
A.2.1 Measurement of the total input power . 15
A.2.2 Light output measurement . 16
A.2.3 Distance to lamp related to lamp length: explanations . 17
Annex B (informative) Application of the reference ballast when assessing lamps in
electronic operation . 19
B.1 Calculation of the reference ballast impedance . 19
B.2 Method of adjusting the lamp power . 19
Bibliography . 20

Figure A.1 – Measurement of electromagnetic controlgear-lamp circuits . 15
Figure A.2 – Measurement of AC supplied electronic controlgear-lamp circuits . 16
Figure A.3 – Side view of light output measurement system . 16
Figure A.4 – Top view of light output measurement system . 17
Figure A.5 – Configuration of lamp and photocell sensor . 18

IEC 62442-1:2022 © IEC 2022 – 3 –
Table 1 – Typical nominal electricity supply details for some regions . 11

– 4 – IEC 62442-1:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY PERFORMANCE OF LAMP CONTROLGEAR –

Part 1: Controlgear for fluorescent lamps –
Method of measurement to determine the total input power
of controlgear circuits and the efficiency of controlgear

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditi
...