EN IEC 62442-1:2018
(Main)Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
NEW!IEC 62442-1:2018 is available as IEC 62442-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62442-1:2018 defines a measurement and calculation method of the total input power for controlgear-lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency of the lamp controlgear is also defined. This document applies to electrical controlgear-lamp circuits consisting only of the controlgear and the lamp(s). It is intended for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision and has been harmonized with IEC 62442-2 and IEC 624423.
Energieeffizienz von Lampenbetriebsgeräten - Teil 1: Betriebsgeräte für Leuchtstofflampen - Messverfahren zur Bestimmung der Gesamteingangsleistung von Betriebsgeräteschaltungen und des Wirkungsgrades von Betriebsgeräten
Performance énergétique des appareillages de lampes - Partie 1: Appareillages des lampes à fluorescence - Méthode de mesure pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages
NEW!IEC 62442-1:2018 est disponible sous forme de IEC 62442-1:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 62442-1:2018 définit une méthode de mesure et de calcul de la puissance d'entrée totale pour les circuits d’appareillage-lampe fonctionnant avec la ou les lampes à fluorescence qui leur sont associées. La méthode de calcul du rendement des appareillages de lampe est également définie. Le présent document s'applique aux circuits électriques d’appareillage de lampe constitués exclusivement de l'appareillage et de(s) lampe(s). Il s'applique à des alimentations en courant continu jusqu’à 1 000 V et/ou à des alimentations en courant alternatif de 1 000 V au maximum, à 50 Hz ou 60 Hz. Cette deuxième édition annule et remplace la première édition parue en 2011. Cette édition constitue une révision technique et a été harmonisée avec l’IEC 62442-2 et l’IEC 62442-3.
Energijske lastnosti krmilne naprave sijalke - 1. del: Krmilna naprava za fluorescentne sijalke - Merilna metoda za ugotavljanje celotne vhodne moči krmilnih vezij in izkoristka krmilne naprave (IEC 62442-1:2018)
Ta del standarda IEC 62442 določa metodo za meritev in izračun celotne vhodne moči krmilnih vezij sijalk, kadar delujejo s fluorescenčnimi sijalkami. Opredeljena je tudi računska metoda za izkoristek krmilne naprave. Ta dokument se uporablja za električna krmilna vezja sijalk, ki jih sestavljajo le krmilna naprava in sijalke. Namenjen je za uporabo z enosmerno napajalno napetostjo do vključno 1000 V in/ali izmenično napajalno napetostjo do vključno 1000 V pri frekvenci 50 Hz ali 60 Hz.
OPOMBA: Zahteve za preskušanje posameznih delov krmilne opreme med proizvodnjo niso vključene.
Ta dokument določa merilno metodo za skupno vhodno moč in metodo za izračun učinkovitosti krmilnih naprav za vse krmilne naprave, ki se uporabljajo za domačo uporabo in običajne komercialne namene ter delujejo z naslednjimi fluorescentnimi sijalkami:
– linearne fluorescentne sijalke;
– fluorescentne sijalke z enojno vijačnico (kompaktne);
– ostale fluorescentne sijalke za splošne namene.
Ta dokument se ne uporablja za:
– krmilno napravo, ki je sestavni del sijalke;
– krmiljeno magnetno krmilno napravo z žičnim navitjem;
– svetilke, ki so odvisne od dodatnih vidikov optične učinkovitosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2019
1DGRPHãþD
SIST EN 62442-1:2012
SIST EN 62442-1:2012/A11:2018
SIST EN 62442-1:2012/AC:2012
(QHUJLMVNHODVWQRVWLNUPLOQHQDSUDYHVLMDONHGHO .UPLOQDQDSUDYD]D
IOXRUHVFHQWQHVLMDONH0HULOQDPHWRGD]DXJRWDYOMDQMHFHORWQHYKRGQHPRþL
NUPLOQLKYH]LMLQL]NRULVWNDNUPLOQHQDSUDYH ,(&
Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps -
Method of measurement to determine the total input power of controlgear circuits and the
efficiency of the controlgear (IEC 62442-1:2018)
Energieeffizienz von Lampenbetriebsgeräten - Teil 1: Betriebsgeräte für
Leuchtstofflampen - Messverfahren zur Bestimmung der Gesamteingangsleistung von
Betriebsgeräteschaltungen und des Wirkungsgrades von Betriebsgeräten (IEC 62442-
1:2018)
Performance énergétique des appareillages de lampes - Partie 1: Appareillages des
lampes à fluorescence - Méthode de mesure pour la détermination de la puissance
d'entrée totale des circuits d'appareillage et du rendement des appareillages (IEC 62442-
1:2018)
Ta slovenski standard je istoveten z: EN IEC 62442-1:2018
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62442-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 29.140.99 Supersedes EN 62442-1:2011
English Version
Energy performance of lamp controlgear - Part 1: Controlgear for
fluorescent lamps - Method of measurement to determine the
total input power of controlgear circuits and the efficiency of the
controlgear
(IEC 62442-1:2018)
Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 1:
Partie 1: Appareillages des lampes à fluorescence - Betriebsgeräte für Leuchtstofflampen - Messverfahren zur
Méthode de mesure pour la détermination de la puissance Bestimmung der Gesamteingangsleistung von
d'entrée totale des circuits d'appareillage et du rendement Betriebsgeräteschaltungen und des Wirkungsgrades von
des appareillages Betriebsgeräten
(IEC 62442-1:2018) (IEC 62442-1:2018)
This European Standard was approved by CENELEC on 2018-10-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62442-1:2018 E
European foreword
The text of document 34C/1335A/CDV, future edition 2 of IEC 62442-1, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62442-1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-03-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-09-28
document have to be withdrawn
This document supersedes EN 62442-1:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62442-1:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62442-1 NOTE Harmonized as EN 62442-1
IEC 62442-3 NOTE Harmonized as EN IEC 62442-3
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60081 1997 Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
+ A4 2010 + A4 2010
- - + A11 2018
IEC 60901 1996 Single-capped fluorescent lamps - EN 60901 1996
Performance specifications
+ A5 2011 + A5 2012
IEC 60921 2004 Ballasts for tubular fluorescent lamps - EN 60921 2004
Performance requirements
IEC 60929 2011 AC and/or DC-supplied electronic control EN 60929 2011
gear for tubular fluorescent lamps -
Performance requirements
- - + AC 2011
IEC 61347-2-3 - Lamp control gear - Part 2-3: Particular EN 61347-2-3 -
requirements for a.c. and/or d.c. supplied
electronic control gear for fluorescent
lamps
IEC 61347-2-8 - Lamp controlgear - Part 2-8: Particular EN 61347-2-8 -
requirements for ballasts for fluorescent
lamps
IEC 62442-1 ®
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Energy performance of lamp controlgear –
Part 1: Controlgear for fluorescent lamps – Method of measurement to determine
the total input power of controlgear circuits and the efficiency of controlgear
Performance énergétique des appareillages de lampes –
Partie 1: Appareillages des lampes à fluorescence – Méthode de mesure pour la
détermination de la puissance d'entrée totale des circuits d'appareillage et du
rendement des appareillages
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-5641-1
– 2 – IEC 62442-1:2018 © IEC 2018
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 9
4.1 Applicability . 9
4.2 Ballast lumen factor . 9
4.3 Dimmable controlgear . 10
4.4 Multi-power and/or multi-number-lamp controlgear . 10
4.5 General notes on tests . 10
4.6 Sampling of controlgear for testing . 10
4.7 Size of the test sample. 10
4.8 Conditioning of lamps . 10
4.9 Test voltages and frequencies . 10
4.10 Sensor and network connections . 11
5 Method of measurement and calculation of total input power of controlgear-lamp
circuits and the efficiency of controlgear . 11
5.1 Correction for ballast lumen factor . 11
5.2 Method of measurement . 11
5.3 Measurement and calculation of the total input power of magnetic
controlgear-lamp circuits . 12
5.4 Calculation of the efficiency of electromagnetic controlgear . 12
5.5 Measurement and calculation of the total input power of electronic
controlgear-lamp circuits . 12
5.6 Calculation of the efficiency of electronic controlgear . 13
5.7 Measuring the standby power . 13
Annex A (normative) Energy performance measurement setup . 14
A.1 Measurement setup for electromagnetic controlgear . 14
A.2 Measurement setup for electronic controlgear . 14
A.2.1 Measurement of the total input power . 14
A.2.2 Measuring method of standby power . 15
A.2.3 Light output measurement . 15
A.2.4 Distance to lamp related to lamp length: explanations . 17
Annex B (informative) Application of the reference ballast when assessing lamps in
electronic operation . 19
B.1 Calculation of the reference ballast impedance . 19
B.2 Method of adjusting the lamp power . 19
Bibliography . 20
Figure A.1 – Measurement of electromagnetic controlgear-lamp circuits . 14
Figure A.2 – Measurement of AC supplied electronic controlgear-lamp circuits . 15
Figure A.3 – Test setup for measuring standby power . 15
Figure A.4 – Side view of light output measurement system . 16
Figure A.5 – Top view of light output measurement system . 16
Figure A.6 – Configuration of lamp and photocell sensor . 18
IEC 62442-1:2018 © IEC 2018 – 3 –
Table 1 – Typical nominal electricity supply details for some regions . 11
– 4 – IEC 62442-1:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY PERFORMANCE OF LAMP CONTROLGEAR –
Part 1: Controlgear for fluorescent lamps –
Method of measurement to determine the total input power
of controlgear circuits and the efficiency of controlgear
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.