iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61935-3:2009

(Main)

Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards

Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards

IEC 61935-3:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.

Prüfung der symmetrischen und koaxialen informationstechnischen Verkabelung - Teil 3: Installierte Verkabelung nach EN 50173-4 und entsprechenden Normen

Essais des câblages de technologies de l'information symétriques et coaxiaux - Partie 3: Câblages installés selon les spécifications de l'EN 50173-4 et des normes connexes

La CEI 61935:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.

Simetrično in koaksialno okablenje v informacijski tehnologiji - 3. del: Instalirano okablenje po specifikacijah iz ISO/IEC 15018 in sorodnih standardov (IEC 61935-3:2008, spremenjen)

Ta del IEC 61935 opredeljuje preskušanje skladnosti za domače okabljenje.  Ti preskusi skladnosti zajemajo vidni pregled, preskušanje potrditve in bodisi preskušanje kvalifikacij ali preskušanje certifikatov. Prav tako je  določena dokumentacija za rezultate preskusov.

General Information

Status
Published
Publication Date
22-Dec-2009
Withdrawal Date
31-May-2011
ICS
33.120.20 - Wires and symmetrical cables
Technical Committee
CLC/TC 46X - Communication cables
Drafting Committee
IEC/TC 46 - IEC_TC_46
Parallel Committee
IEC/TC 46 - IEC_TC_46
Current Stage
6060 - Document made available - Publishing
Start Date
23-Dec-2009
Completion Date
23-Dec-2009
Ref Project
SIST EN 61935-3:2010 - Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards (IEC 61935-3:2008, modified)

Buy Standard

EN 61935-3:2010 - BARVEEN 61935-3:2010 - BARVE
PreviousNext
Standard
EN 61935-3:2010 - BARVE
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61935-3:2010
01-marec-2010
6LPHWULþQRLQNRDNVLDOQRRNDEOHQMHYLQIRUPDFLMVNLWHKQRORJLMLGHO,QVWDOLUDQR
RNDEOHQMHSRVSHFLILNDFLMDKL],62,(&LQVRURGQLKVWDQGDUGRY ,(&
VSUHPHQMHQ
Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling
as specified in ISO/IEC 15018 and related standards (IEC 61935-3:2008, modified)
Prüfung der symmetrischen und koaxialen informationstechnischen Verkabelung - Teil 3:
Installierte Verkabelung nach ISO/IEC 15018 und entsprechenden Normen (IEC 61935-
3:2008, modifiziert)
Essais des câblages symétriques et coaxiaux dédiés aux technologies de l'information -
Partie 3: Câblages installés conformément à la ISO/CEI 15018 et normes connexes (CEI
61935-3:2008, modifiée)
Ta slovenski standard je istoveten z: EN 61935-3:2009
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 61935-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61935-3:2010

---------------------- Page: 2 ----------------------

SIST EN 61935-3:2010

EUROPEAN STANDARD
EN 61935-3

NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM

ICS 33.120.20


English version


Testing of balanced and coaxial information technology cabling -
Part 3: Installed cabling as specified in EN 50173-4
and related standards
(IEC 61935-3:2008, modified)


Essais des câblages de technologies  Prüfung der symmetrischen und koaxialen
de l'information symétriques et coaxiaux - informationstechnischen Verkabelung -
Partie 3: Câblages installés Teil 3: Installierte Verkabelung
selon les spécifications de l'EN 50173-4 nach EN 50173-4 und
et des normes connexes entsprechenden Normen
(CEI 61935-3:2008, modifiée) (IEC 61935-3:2008, modifiziert)




This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61935-3:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61935-3:2010
EN 61935-3:2009 - 2 -
Foreword
The text of document 46/261/FDIS, future edition 1 of IEC 61935-3, prepared by IEC TC 46, Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61935-3 on
2008-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-06-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________

---------------------- Page: 4 ----------------------

SIST EN 61935-3:2010
- 3 - EN 61935-3:2009
Endorsement notice
The text of the International Standard IEC 61935-3:2008 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS

Title page
Replace "ISO/IEC 15018" by "EN 50173-4".
Clause 2, Normative references
Replace the references to ISO/IEC 11801 and ISO/IEC 15018 by
EN 50173-1, Information technology - Generic cabling systems – Part 1: General requirements
EN 50173-4, Information technology - Generic cabling systems – Part 4: Homes
General
Replace all other occurrences of "ISO/IEC 11801" by "EN 50173-1". This replacement is to be made in
Subclauses 3.1 and 5.3.
Replace all other occurrences of "ISO/IEC 15018" by "E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50289-1-2:2023(Main)
Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
SIST EN 50289-1-2:2023

This document details the test methods to determine the DC resistance characteristics of the conductors of cables used in analogue and digital communication systems. These characteristics are described by the conductor resistance, loop resistance and resistance unbalance.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50289-1-1:2017(Main)
Communication cables - Specifications for test methods - Part 1-1: Electrical test methods - General requirements
SIST EN 50289-1-1:2017

The draft European Standard specifies the electrical test methods for cables used in analogue and digital communication systems. Part 1 of EN 50289 consists of the following documents: - Part 1-1 General requirements - Part 1-2 DC resistance - Part 1-3 Dielectric strength - Part 1-4 Insulation resistance - Part 1-5 Capacitance - Part 1-6 Electromagnetic performance - Part 1-7 Velocity of propagation - Part 1-8 Attenuation - Part 1-9 Unbalance attenuation (longitudinal conversation loss, longitudinal conversion transfer loss) - Part 1-10 Crosstalk - Part 1-11 Characteristic impedance, input impedance, return loss - Part 1-12 Inductance - Part 1-13 Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables - Part 1-14 Coupling attenuation or screening attenuation of connecting hardware - Part 1-15 Coupling attenuation of links and channels (Laboratory conditions) - Part 1-16 Coupling attenuation of cable assemblies (Field conditions) - Part 1-17 Exogenous Crosstalk ExNEXT and ExFEXT Further test details (e.g. temperature, duration) and/or test requirements are given in the relevant cable standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50289-1-9:2017(Main)
Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
SIST EN 50289-1-9:2017

This European Standard details the test methods to determine the attenuation of converted differential-mode signals into common-mode signals, and vice versa, due to balance characteristics of cables used in analogue and digital communication systems by using the transmission measurement method. The unbalance attenuation is measured in, respectively converted to, standard operational conditions. If not otherwise specified, e.g. by product specifications, the standard operational conditions are a differential-mode which is matched with its nominal characteristic impedance (e.g. 100 Ω) and a common-mode which is loaded with 50 Ω. The difference between the (image) unbalance attenuation (matched conditions in the differential and common-mode) to the operational (Betriebs) unbalance attenuation (matched conditions in differential-mode and 50 Ω reference load in the common-mode) is small provided the common-mode impedance Zcom is in the range of 25 Ω to 75 Ω. For cables having a nominal impedance of 100 Ω, the value of the common-mode impedance Zcom is about 75 Ω for up to 25 pair- count unscreened pair cables, 50 Ω for common screened pair cables and more than 25 pair- count unscreened pair cables, and 25 Ω for individually screened pair cables. The impedance of the common-mode circuit Zcom can be measured more precisely either with a time domain reflectometer (TDR) or a network analyser. The two conductors of the pair are connected together at both ends and the impedance is measured between these conductors and the return path. This European Standard is bound to be read in conjunction with EN 50289 1 1, which contains essential provisions for its application.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50289-1-8:2017(Main)
Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation
SIST EN 50289-1-8:2017

This draft European Standard details the test methods to determine attenuation of finished cables used in analogue and digital communication systems. It is bound to be read in conjunction with EN 50289-1-1, which contains essential provisions for its application.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50289-1-11:2016(Main)
Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
SIST EN 50289-1-11:2017

This Part of EN 50289 details the test methods to determine characteristic impedance, input impedance and return loss of cables used in analogue and digital communication systems. It is to be read in conjunction with EN 50289-1-1, which contains essential provisions for its application.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50288-10-2:2015(Main)
Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications
SIST EN 50288-10-2:2016

EN 50288-10-1 is a sectional specification for screened cables, characterised from 1 MHz up to 500 MHz, to be as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centres cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics and requirements of the cables when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288-1, which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communications systems. These cables are not intended to be used in conjunction with low impedance sources, for example the electrical power supplies of public utility mains.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50288-9-2:2015(Main)
Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications
SIST EN 50288-9-2:2016

This sectional specification covers screened cables, characterised from 1 MHz up to 1 000 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centres cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics and requirement of the cables when tested in accordance with the referenced test methods. This sectional specification should be read in conjunction with EN 50288-1, which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50288-2-2:2013(Main)
Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
SIST EN 50288-2-2:2013

EN 50288-2-2 is a sectional specification for screened cables, characterised from 1 MHz up to 100 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centres cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics of the cables, when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50288-3-2:2013(Main)
Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables
SIST EN 50288-3-2:2013

EN 50288-3-3 is a sectional specification for unscreened cables, characterised from 1 MHz up to 100 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centre cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics of the cables, when tested in accordance with the referenced test methods.. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50288-5-1:2013(Main)
Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
SIST EN 50288-5-1:2013

EN 50288-5-1 is a sectional specification for screened cables, characterised from 1 MHz up to 250 MHz, to be used in horizontal and building backbone wiring as defined in EN 50173. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics of the cables, when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288-1 that contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day