Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables

EN 50288-3-3 is a sectional specification for unscreened cables, characterised from 1 MHz up to 100 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centre cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics of the cables, when tested in accordance with the referenced test methods.. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 3-2: Rahmenspezifikation für ungeschirmte Kabel bis 100 MHz - Geräteanschlusskabel und Schaltkabel

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 3-2: Spécification intermédiaire pour les câbles non blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de brassage

Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje - 3-2. del: Področna specifikacija za nezaslonjene kable z lastnostmi do 100 MHz - Kabli za delovna območja in povezovalne vrvice

Standard EN 50288-3-2 je področna specifikacija za nezaslonjene kable, ki se lahko uporabljajo za pasovne širine od 1 MHz do 100 MHz kot kabli na delovnem območju za povezavo telekomunikacijske vtičnice s terminalsko opremo, ter za povezovalne vrvice za vzpostavljanje povezav na povezovalni plošči, kot je določeno v EN 50173. Kabli delovnega območja in podatkovnega centra se lahko uporabljajo tudi kot povezovalne vrvice v katerem koli razdelilniku generičnega stavbnega sistema ožičenja za povezavo z opremo ali navzkrižno povezavo med kabelskimi sistemi. Ta področna specifikacija vsebuje električne, mehanske, prenosne in okoljske karakteristike delovanja kablov pri preskušanju v skladu z navedenimi preskusnimi metodami. Ta področna specifikacija se uporablja skupaj s standardom EN 50288-1, ki vsebuje bistvene določbe za njeno uporabo. Kabli, zajeti v tej področni specifikaciji, so namenjeni za delovanje pri napetostih in tokovih, ki so običajni v komunikacijskih sistemih. Ti kabli niso namenjeni za uporabo z viri z nizko impedanco, na primer z električnim napajanjem javnih omrežij.

General Information

Status
Published
Publication Date
23-May-2013
Withdrawal Date
17-Mar-2016
Current Stage
6060 - Document made available - Publishing
Start Date
24-May-2013
Completion Date
24-May-2013

Relations

Buy Standard

Standard
EN 50288-3-2:2013
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 3-2: Rahmenspezifikation für ungeschirmte Kabel bis 100 MHz - Geräteanschlusskabel und SchaltkabelCâbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 3-2: Spécification intermédiaire pour les câbles non blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de brassageMulti-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables33.120.20Wires and symmetrical cablesICS:Ta slovenski standard je istoveten z:EN 50288-3-2:2013SIST EN 50288-3-2:2013en01-oktober-2013SIST EN 50288-3-2:2013SLOVENSKI
STANDARD



SIST EN 50288-3-2:2013



EUROPEAN STANDARD EN 50288-3-2 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-3-2:2013 E
ICS 33.120.20 Supersedes EN 50288-3-2:2003
English version
Multi-element metallic cables used in analogue and digital communication and control -
Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz -
Work area and patch cord cables
Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques -
Partie 3-2: Spécification intermédiaire pour les câbles non blindés pour applications jusqu'à 100 MHz -
Câbles de zone de travail et de brassage
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung -
Teil 3-2: Rahmenspezifikation für ungeschirmte Kabel bis 100 MHz -
Geräteanschlusskabel und Schaltkabel
This European Standard was approved by CENELEC on 2013-03-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 50288-3-2:2013



EN 50288-3-2:2013 - 2 -
Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms, definitions, symbols and abbreviations . 4 3.1 Terms and definitions . 4 3.2 Symbols and abbreviations . 4 4 Cable construction . 5 4.1 Conductor . 5 4.2 Insulation . 5 4.3 Cabling elements . 5 4.4 Identification of cabling elements . 5 4.5 Screening of cabling elements . 5 4.6 Cable make-up .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.