EN IEC 63182-1:2020

Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

IEC 63182-1:202 (E) specifies the dimensions of magnetic powder cores. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities. It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each powder core will appear with the part within the IEC 63182 series.

Magnetische Pulverkerne – Leitlinien zu Maßen und Grenzen von Oberflächenbeschädigungen – Teil 1: Allgemeine Festlegung

Noyaux en poudre magnétique comprimée - Lignes directrices concernant les dimensions et les limites des irrégularités de surface - Partie 1: Spécification générale

L'IEC 63182-1:2020 spécifie les dimensions des noyaux en poudre magnétique. Le présent document spécifie également des lignes directrices concernant les limites admissibles des irrégularités de surface des noyaux en poudre magnétique. Il convient de considérer ces lignes directrices comme une spécification générale utile dans le dialogue entre les fabricants et les utilisateurs des noyaux en poudre magnétique portant sur les irrégularités de surface. Il est prévu que le présent document inclue les noyaux en poudre magnétique largement utilisés et référencés dans le secteur industriel, soit parce qu’ils sont inclus dans des normes nationales, soit du fait de leur emploi réputé généralisé dans ledit secteur. Le cas échéant, il convient que le nom industriel existant pour chaque noyau en poudre magnétique apparaisse avec la partie dans la série de normes IEC 63182.

Jedra iz magnetnega prahu - Smernice o merah in mejnih vrednostih površinskih nepravilnosti - 1. del: Splošne specifikacije

General Information

• Status: Published
• Publication Date: 23-Jul-2020
• ICS: 29.100.10 - Magnetic components
• Technical Committee: CLC/SR 51 - Magnetic components and ferrite materials
• Drafting Committee: IEC/TC 51 - IEC_TC_51
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Jul-2020
• Completion Date: 24-Jul-2020
• Ref Project: SIST EN IEC 63182-1:2020 - Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part1: General specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63182-1:2020
01-september-2020
Jedra iz magnetnega prahu - Smernice o merah in mejnih vrednostih površinskih
nepravilnosti - 1. del: Splošne specifikacije
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities
- Part1: General specification
Ta slovenski standard je istoveten z: EN IEC 63182-1:2020
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 63182-1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63182-1:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 63182-1:2020


EUROPEAN STANDARD EN IEC 63182-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2020
ICS 29.100.10

English Version
Magnetic powder cores - Guidelines on dimensions and the
limits of surface irregularities - Part 1: General specification
(IEC 63182-1:2020)
Noyaux en poudre magnétique comprimée - Lignes Magnetische Pulverkerne - Leitlinien zu Maßen und
directrices concernant les dimensions et les limites des Grenzen von Oberflächenbeschädigungen - Teil 1:
irrégularités de surface - Partie 1: Spécification générale Allgemeine Festlegung
(IEC 63182-1:2020) (IEC 63182-1:2020)
This European Standard was approved by CENELEC on 2020-07-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63182-1:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63182-1:2020
EN IEC 63182-1:2020 (E)
European foreword
The text of document 51/1324/CDV, future edition 1 of IEC 63182-1, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 63182-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-07-01
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63182-1:2020 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 63182-1:2020
EN IEC 63182-1:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60401-1 - Terms and nomenclature for cores made of EN IEC 60401-1 -
magnetically soft ferrites - Part 1: Terms used
for physical irregularities and reference of
dimensions



3

---------------------
...