EN 61326-2-2:2013
(Main)Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-2:2012 specifies more detailed test configurations, operational conditions and performance criteria for equipment covered by Annex A of IEC 61326-1 which is used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and; powered by battery and/or from the circuit measured, and portable. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. The main technical changes are: Update with respect to IEC 61326-1:2012.
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den Gebrauch in Niederspannungs-Stromversorgungsnetzen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et de surveillance utilisés dans des systèmes de distribution basse tension
La CEI 61326-2-2:2012 donne des spécifications plus détaillées des configurations d'essai, des conditions fonctionnelles et des critères de performance pour les matériels couverts par l'Annexe A de la CEI 61326-1, qui sont: utilisés pour le contrôle, la mesure ou la surveillance de mesures de protection dans les réseaux de distribution basse tension, et; alimentés par batterie et/ou par le circuit mesuré, et portatifs. Cette deuxième édition annule et remplace la première édition parue en 2005. Cette édition constitue une révision technique. Les principaux changements techniques sont: Mise à jour par rapport à la CEI 61326-1:2012.
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila za lastnosti prenosne preskuševalne, merilne in nadzorne opreme, ki se uporablja v nizkonapetostnih razdeljevalnih sistemih (IEC 61326-2-2:2012)
Poleg področja uporabe standarda IEC 61326-1 ta del standarda IEC 61326 določa podrobnejše preskusne konfiguracije, obratovalne pogoje in merila za lastnosti opreme iz dodatka A standarda IEC 61326-1, za katero velja: – uporablja se za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov v nizkonapetostnih razdeljevalnih sistemih; – napaja jo baterija in/ali merjeni tokokrog in – je prenosna. Primeri take preskušane opreme med drugim vključujejo detektorje napetosti, naprave za preskušanje izolacije, naprave za preskušanje ozemljitvene neprekinjenosti, naprave za preskušanje ozemljitvene upornosti, naprave za preskušanje impedance zanke, naprave za preskušanje naprav na diferenčni tok (naprave za preskušanje RCD) in naprave za preskušanje faznega zaporedja, kot je opredeljeno v standardu IEC 61557. Proizvajalec določi okolje, v katerem naj bi se izdelek uporabljal, in/ali izbere ustrezne specifikacije preskusne ravni iz standarda IEC 61326-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2013
1DGRPHãþD
SIST EN 61326-2-2:2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW (0& GHO 3RVHEQH]DKWHYH3UHVNXVQH
NRQILJXUDFLMHREUDWRYDOQLSRJRMLLQPHULOD]DODVWQRVWLSUHQRVQHSUHVNXãHYDOQH
PHULOQHLQQDG]RUQHRSUHPHNLVHXSRUDEOMDYQL]NRQDSHWRVWQLKUD]GHOMHYDOQLK
VLVWHPLK ,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and
performance criteria for portable test, measuring and monitoring equipment used in low-
voltage distribution systems (IEC 61326-2-2:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen – Teil 2-2:
Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den
Gebrauch in Niederspannungs-Stromversorgungsnetzen (IEC 61326-2-2:2012)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères d'aptitude à la fonction des matériels portatifs d'essai, de
mesure et de surveillance utilisés dans des systèmes de distribution basse tension (CEI
61326-2-2:2012)
Ta slovenski standard je istoveten z: EN 61326-2-2:2013
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61326-2-2
NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM
ICS 17.220; 25.040.40; 33.100 Supersedes EN 61326-2-2:2006
English version
Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 2-2: Particular requirements -
Test configurations, operational conditions and performance criteria for
portable test, measuring and monitoring equipment used in low-voltage
distribution systems
(IEC 61326-2-2:2012)
Matériel électrique de mesure, de Elektrische Mess-, Steuer-, Regel- und
commande et de laboratoire - Laborgeräte – EMV-Anforderungen – Teil
Exigences relatives à la CEM - 2-2: Besondere Anforderungen –
Partie 2-2: Exigences particulières - Prüfanordnung, Betriebsbedingungen und
Configurations d'essai, conditions de Leistungsmerkmale für ortsveränderliche
fonctionnement et critères d'aptitude à la Prüf-, Mess- und Überwachungsgeräte für
fonction des matériels portatifs d'essai, de den Gebrauch in Niederspannungs-
mesure et de surveillance utilisés dans Stromversorgungsnetzen
des systèmes de distribution basse (IEC 61326-2-2:2012)
tension
(CEI 61326-2-2:2012)
This European Standard was approved by CENELEC on 2012-11-06. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-2:2013 E
Foreword
The text of document 65A/642/FDIS, future edition 2 of IEC 61326-2-2, prepared by SC 65A, "System
aspects", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61326-2-2:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-08-06
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-11-06
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61326-2-2:2006.
2:2006:
– Update with respect to EN 61326-1:2013.
of clauses, subclauses, tables and figures.
When a particular subclause of EN 61326-1 is not mentioned in this part, that subclause applies as far as
is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in
EN 61326-1 is to be adapted accordingly.
NOTE The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in EN 61326-1;
– unless notes are in a new subclause or involve notes in EN 61326-1, they are numbered starting from 101 including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61326-2-2:2012 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 61326-2-2:2013
Annex ZA
(normative)
Normative references to i nternational publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Annex ZA of EN 61326-1:2013 applies, except as follows:
Publication Year Title EN/HD Year
Addition:
IEC 61326-1 2012 Electrical equipment for measurement, control EN 61326-1 2013
and laboratory use - EMC requirements -
Part 1: General requirements
IEC 61557 Series Electrical safety in low voltage distribution EN 61557 Series
systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or
monitoring of protective measures
Annex ZZ
(informative)
Coverage of Essential Requirements of EU Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers
protection requirements of Annex I, Article 1 of the EC Directive 2004/108/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive[s] concerned.
NOTE Other requirements and other EU Directives may be applicable to the products falling within the scope of
this standard.
IEC 61326-2-2 ®
Edition 2.0 2012-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical equipment for measurement, control and laboratory use –
EMC requirements –
Part 2-2: Particular requirements – Test configurations, operational conditions
and performance criteria for portable test, measuring and monitoring equipment
used in low-voltage distribution systems
Matériel électrique de mesure, de commande et de laboratoire – Exigences
relatives à la CEM –
Partie 2-2: Exigences particulières – Configurations d’essai, conditions de
fonctionnement et critères de performance des matériels portatifs d’essai, de
mesure et de surveillance utilisés dans des systèmes de distribution basse
tension
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 17.220; 25.040.40; 33.100 ISBN 978-2-83220-397-2
– 2 – 61326-2-2 © IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 6
5 EMC test plan . 6
5.1 General . 6
5.2 Configuration of EUT during testing . 6
5.3 Operation conditions of EUT during testing . 8
5.4 Specification of functional performance . 8
5.5 Test description . 8
6 Immunity requirements . 8
6.1 Conditions during the tests . 8
6.2 Immunity test requirements . 8
6.3 Random aspects. 9
6.4 Performance criteria . 9
7 Emission requirements . 9
8 Test results and test report . 9
9 Instructions for use . 9
Figure 101 – Test set-up for portable test, measuring and monitoring equipment based
on IEC 61000-4-3 . 7
Figure 102 – Example of connection details for voltage measurements . 7
Figure 103 – Example of connection details for current measurements . 8
61326-2-2 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL EQUIPMENT FOR MEASUREMENT,
CONTROL AND LABORATORY USE –
EMC REQUIREMENTS –
Part 2-2: Particular requirements –
Test configurations, operational conditions and
performance criteria for portable test, measuring and
monitoring equipment used in low-voltage distribution systems
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.