EN 61326-2-2:2006

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

this part of IEC 61326 specifies more detailed test configurations, operational conditions and performance criteria for equipment which is used for testing, measuring or monitoring of protective measures in low-voltage distribution systems, and powered by battery and/or from the circuit measured, and portable The contents of the corrigendum of November 2007 have been included in this copy.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 2-2: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den Gebrauch in Niederspannungs-Stromversorgungsnetzen

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères d'aptitude à la fonction des matériels portatifs d'essai, de mesure et de surveillance utilisés dans des systèmes de distribution basse tension

donne des spécifications plus détaillées des configurations d'essai, des conditions fonctionnelles et des critères d'aptitude à la fonction pour les matériels qui sont utilisés dans des systèmes basse tension d'essai, de mesure ou de surveillance de protection et alimentés par batterie et/ou par le circuit mesuré, et portatifs Le contenu du corrigendum de novembre 2007 a été pris en considération dans cet exemplaire.

Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila za lastnosti prenosne preskušalne, merilne in monitoring opreme, ki se uporablja v nizkonapetostnih razdeljevalnih sistemih (IEC 61326-2-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 04-May-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Parallel Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 06-Nov-2015
• Completion Date: 06-Nov-2015
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Ref Project: SIST EN 61326-2-2:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

Relations

• Replaces: EN 61326:1997/A3:2003 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 29-Jan-2023
• Replaces: EN 61326:1997 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 29-Jan-2023
• Replaces: EN 61326:1997/A2:2001 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 29-Jan-2023
• Replaces: EN 61326:1997/A1:1998 - Electrical equipment for measurement, control and laboratory use - EMC requirements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61326-2-2:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61326-2-2:2007
01-januar-2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW(0&GHO3RVHEQH]DKWHYH3UHVNXVQH
NRQILJXUDFLMHREUDWRYDOQLSRJRMLLQPHULOD]DODVWQRVWLSUHQRVQHSUHVNXãDOQH
PHULOQHLQPRQLWRULQJRSUHPHNLVHXSRUDEOMDYQL]NRQDSHWRVWQLKUD]GHOMHYDOQLK
VLVWHPLK,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements --
Part 2-2: Particular requirements - Test configurations, operational conditions and
performance criteria for portable test, measuring and monitoring equipment used in low-
voltage distribution systems
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen -- Teil 2-2:
Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den
Gebrauch in Niederspannungs-Stromversorgungsnetzen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM -- Partie 2-2: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères d'aptitude à la fonction des matériels portatifs d'essai, de
mesure et de surveillance utilisés dans des systèmes de distribution basse tension
Ta slovenski standard je istoveten z: EN 61326-2-2:2006
ICS:
25.040.40
33.100.01
SIST EN 61326-2-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61326-2-2

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 25.040.40; 33.100 Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003

English version

Electrical equipment for measurement,
control and laboratory use –
EMC requirements
Part 2-2: Particular requirements –
Test configurations, operational conditions and performance criteria
for portable test, measuring and monitoring equipment
used in low-voltage distribution systems
(IEC 61326-2-2:2005)

Matériel électrique de mesure, de Elektrische Mess-, Steuer-, Regel-
commande et de laboratoire – und Laborgeräte –
Exigences relatives à la CEM EMV-Anforderungen
Partie 2-2: Exigences particulières – Teil 2-2: Besondere Anforderungen –
Configurations d'essai, conditions Prüfanordnung, Betriebsbedingungen
de fonctionnement et critères d'aptitude und Leistungsmerkmale
à la fonction des matériels portatifs für ortsveränderliche Prüf-, Mess- und
d'essai, de mesure et de surveillance Überwachungsgeräte für den Gebrauch
utilisés dans des systèmes in Niederspannungs-
de distribution basse tension Stromversorgungsnetzen
(CEI 61326-2-2:2005) (IEC 61326-2-2:2005)

This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-2:2006 E

---------------------- Page: 2 ----------------------

EN 61326-2-2:2006 - 2 -
Foreword
The text of document 65A/457/FDIS, future edition 1 of IEC 61326-2-2, prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61326-2-2 on 2005-12-01.
The EN 61326 series supersedes EN 61326:1997 + corrigendum September 1998 + A1:1998 + A2:2001
+ A3:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN h
...