EN 60315-9:1996

Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception

Specifies the conditions, characteristics and methods of measurement to be used to determine the RDS reception characteristics of a sound-broadcasting receiver, so as to make possible the comparison of results of measurements made by different observers.

Meßverfahren für Funkempfänger für verschiedene Sendearten - Teil 9: Messungen von auf RDS(Radio-Daten-System)-Empfang bezogenen Eigenschaften

Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes d'émission - Partie 9: Méthodes de mesure des caractéristiques relatives à la réception du système de radiodiffusion de données (RDS)

Spécifie les conditions, caractéristiques et méthodes de mesure à utiliser pour déterminer les caractéristiques de réception RDS d'un récepteur de radiodiffusion sonore, afin de pouvoir comparer des résultats des mesures réalisées par différents observateurs.

Methods of measurement on radio receivers for various classes of emission -- Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception (IEC 60315-9:1996)

General Information

• Status: Withdrawn
• Publication Date: 17-Jul-1996
• Withdrawal Date: 31-Mar-1997
• ICS: 33.060.30 - Radio relay and fixed satellite communications systems
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Parallel Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Aug-2014
• Completion Date: 02-Aug-2014
• Ref Project: SIST EN 60315-9:1999 - Methods of measurement on radio receivers for various classes of emission -- Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception

Relations

• Replaced By: EN 62634:2011 - Radio data system (RDS) - Receiver products and characteristics - Methods of measurement
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60315-9:1999
01-april-1999
Methods of measurement on radio receivers for various classes of emission -- Part
9: Measurement of the characteristics relevant to radio data system (RDS)
reception (IEC 60315-9:1996)
Methods of measurement on radio receivers for various classes of emission -- Part 9:
Measurement of the characteristics relevant to radio data system (RDS) reception
Meßverfahren für Funkempfänger für verschiedene Sendearten -- Teil 9: Messungen von
auf RDS(Radio-Daten-System)-Empfang bezogenen Eigenschaften
Méthodes de mesure applicables aux récepteurs radioélectriques pour diverses classes
d'émission -- Partie 9: Méthodes de mesure des caractéristiques relatives à la réception
du système de radiodiffusion de données (RDS)
Ta slovenski standard je istoveten z: EN 60315-9:1996
ICS:
33.160.20 Radijski sprejemniki Radio receivers
SIST EN 60315-9:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999

---------------------- Page: 2 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999

---------------------- Page: 3 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999

---------------------- Page: 4 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999

---------------------- Page: 5 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999

---------------------- Page: 6 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999
NORME
CEI
INTERNATIONALE
IEC
315-9
INTERNATIONAL
Première édition
STANDARD
First edition
1996-05
Méthodes de mesure applicables
aux récepteurs radioélectriques pour
diverses classes d'émission —
Partie 9:
Méthodes de mesure des caractéristiques
relatives à la réception du système
de radiodiffusion de données (RDS)
Methods of measurement on radio
receivers for various classes of emission —
Part 9:
Measurement of the characteristics relevant
to radio data system (RDS) reception
© CEI 1996 Droits de reproduction réservés —Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de réditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève Suisse
Téléfax: [phone] e-mail: inmailiec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission PRICE CODE
IEC
Meai yHapopHaa 3nel rporexHHVectlaa tioMwccwfl
Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999
315-9 ©IEC:1996 – 3 –
CONTENTS
Page
FOREWORD 5
Clause
1 General 7
2 General notes on measurements 9
3 Characteristics and methods of measurement 11
Annexes
A The radio broadcast data system 27
B Bibliography 29

---------------------- Page: 8 ----------------------

SIST EN 60315-9:1999SIST EN 60315-9:1999
315-9 ©IEC:1996 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR
VARIOUS CLASSES OF EMISSION —
Part 9:
Measurement of the characteristics relevant to
radio data system (RDS) reception
FOREWORD
1)
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2)
The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3)
The documents produced have the form of recommendations for international use and are published in the
form of standards, technical repo rts or guides and they are accepted by the National Commit
...