EN 60745-2-17:2003/A11:2007
(Amendment)Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers
Superseded by EN 60745-2-17:2010
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-17: Besondere Anforderungen für Oberfräsen und Kantenfräsen
Outils électroportatifs à moteur - Sécurité - Partie 2-17: Règles particulières pour les défonceuses et affleureuses
Ročna električna orodja - Varnost - 2-17. del: Posebne zahteve za rezkalnike in obrezovalnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-17:2003/A11:2007
01-oktober-2007
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DUH]NDOQLNHLQ
REUH]RYDOQLNH
Hand-held motor-operated electric tools - Safety -- Part 2-17: Particular requirements for
routers and trimmers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-17: Besondere
Anforderungen für Oberfräsen und Kantenfräsen
Outils électroportatifs à moteur - Sécurité -- Partie 2-17: Règles particulières pour les
défonceuses et affleureuses
Ta slovenski standard je istoveten z: EN 60745-2-17:2003/A11:2007
ICS:
25.080.20 Frezalniki Boring and milling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-17:2003/A11:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-17:2003/A11:2007
---------------------- Page: 2 ----------------------
SIST EN 60745-2-17:2003/A11:2007
EUROPEAN STANDARD
EN 60745-2-17/A11
NORME EUROPÉENNE
April 2007
EUROPÄISCHE NORM
ICS 25.140.20
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-17: Particular requirements for routers and trimmers
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-17: Règles particulières Sicherheit -
pour les défonceuses et affleureuses Teil 2-17: Besondere Anforderungen
für Oberfräsen und Kantenfräsen
This amendment A11 modifies the European Standard EN 60745-2-17:2003; it was approved by CENELEC on
2007-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-17:2003/A11:2007 E
---------------------- Page: 3 ----------------------
SIST EN 60745-2-17:2003/A11:2007
EN 60745-2-17:2003/A11:2007 - 2 -
Foreword
This amendment to the European Standard EN 60745-2-17:2003 was prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A11 to EN 60745-2-17:2003 on 2007-02-01.
This amendment was prepared to align the Subclause 6.2 with the new Subclause 6.2 in
EN 60745-1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.