EN 61010-2-012:2016
(Main)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
IEC 61010-2-012:2016 specifies safety requirements for electrical equipment and their accessories within the categories a) through c), wherever they are intended to be used, whenever that equipment incorporates one or more of the following characteristics: - A REFRIGERATING SYSTEM that is acted on or impacted by an integral heating function such that the combined heating and cooling system generates additional and/or more severe HAZARDS than those for the two systems if treated separately. - The materials being treated in the intended application introduce significant heat into the REFRIGERATING SYSTEM that the cooling system in the application yield additional and/or more severe HAZARDS than those for the cooling system if operated at the maximum RATED ambient alone. - An irradiation function for the materials being treated presenting additional HAZARDS. - A function to expose the materials being treated to excessive humidity, carbon dioxide, salt mist, or other substances which may result in additional HAZARDS. - A function of MECHANICAL MOVEMENT presenting additional HAZARDS. - Provision for an OPERATOR to walk-in to the operating area to load or unload the materials being treated. It has the status of a group safety publication in accordance with IEC Guide 104. This publication is to be read in conjunction with IEC 61010-1:2010.
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-012: Besondere Anforderungen an Klima- und Umwelttestgeräte und andere Temperatur-Konditionierungsgeräte
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-012: Exigences particulières pour les appareils d'essais climatiques et d'environnement, et autres appareils de conditionnement de température
L'IEC 61010-2-012:2016 spécifie les exigences de sécurité pour les appareils électriques et leurs accessoires relevant des catégories a) à c) quelle que soit l'utilisation à laquelle ils sont destinés, lorsque ces appareils comprennent une ou plusieurs des caractéristiques suivantes: - Un SYSTEME FRIGORIFIQUE affecté ou influencé par une fonction de chauffage intégrée de sorte que le système de chauffage et de refroidissement combiné engendre des DANGERS supplémentaires et/ou plus graves que ceux pour les deux systèmes s'ils sont traités séparément. - Les matières traitées dans l'application prévue génèrent une chaleur importante dans le SYSTEME FRIGORIFIQUE, de sorte que le système de refroidissement dans l'application engendre des DANGERS supplémentaires et/ou plus graves que ceux pour le système de refroidissement dans le cas où il est utilisé seul à la température ambiante ASSIGNEE maximale. - Une fonction d'exposition aux rayonnements pour les matières traitées qui présentent des DANGERS supplémentaires. - Une fonction dédiée à l'exposition des matières traitées à une humidité excessive, au dioxyde de carbone, au brouillard salin ou à d'autres substances qui peuvent engendrer des DANGERS supplémentaires. - Une fonction de MOUVEMENT MECANIQUE qui présente des DANGERS supplémentaires. - Un dispositif qui permet le déplacement de l'OPERATEUR vers la zone de manoeuvre afin de charger ou décharger les matières traitées. Elle a le statut d'une publication groupée de sécurité conformément au Guide IEC 104. Cette publication doit être lue conjointement avec la IEC 61010-1:2010
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-012. del: Posebne zahteve za opremo za klimatska in okoljska preskušanja ter drugo opremo za uravnavanje temperature (IEC 61010-2-012:2016)
Ta publikacija skupinske varnosti se uporablja predvsem kot standard o varnosti izdelka za izdelke, ki so omenjeni v okviru publikacije, vendar je namenjena tudi tehničnim odborom pri pripravi publikacij za izdelke, ki so podobni izdelkom, omenjenim v okviru tega standarda, skladno z načeli vodil IEC 104 in ISO/IEC 51
2. del standarda IEC 61010 določa varnostne zahteve za električno opremo in njene dodatke v kategorijah od a) do c), kadar so namenjeni uporabi z opremo z eno ali več spodaj navedenimi lastnostmi:
– HLADILNIM SISTEMOM, ki ga upravlja ali nanj vpliva vgrajena grelna funkcija tako, da skupni grelno-hladilni sistem ustvarja dodatne in/ali večje NEVARNOSTI, kot če bi bila sistema neodvisna;
– materiali, ki se obdelujejo pri namenski uporabi, vpeljejo znatno količino toplote v HLADILNI SISTEM, tako da hladilni sistem pri taki uporabi ustvarja dodatne in/ali večje NEVARNOSTI, kot če bi deloval le pri največji NAZIVNI temperaturi;
– funkcijo obsevanja obdelovanih materialov, ki predstavlja dodatne NEVARNOSTI;
– funkcijo, ki obdelovane materiale izpostavlja prekomerni vlažnosti, ogljikovemu dioksidu,
slani megli ali drugim snovem, ki lahko povzročijo dodatne NEVARNOSTI;
– funkcijo MEHANSKEGA GIBANJA, ki predstavlja dodatne NEVARNOSTI;
– določbo, ki UPRAVLJAVCU dovoljuje, da vstopi na območje delovanja, da naloži ali razloži obdelovane materiale.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61010-2-012:2017
01-junij-2017
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO 3RVHEQH]DKWHYH]DRSUHPR]DNOLPDWVNDLQRNROMVND
SUHVNXãDQMDWHUGUXJRRSUHPR]DXUDYQDYDQMHWHPSHUDWXUH ,(&
Safety requirements for electrical equipment for measurement, control, and laboratory
use - Part 2-012: Particular requirements for climatic and environmental testing and other
temperature conditioning equipment (IEC 61010-2-012:2016)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-012: Besondere Anforderungen an Klima- und Umwelttestgeräte und andere
Temperatur-Konditionierungsgeräte (IEC 61010-2-012:2016)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-012: Exigences particulières pour appareils d'essais climatiques et
d'environnement, et autres appareils de conditionnement de température
Ta slovenski standard je istoveten z: EN 61010-2-012:2016
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-2-012:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61010-2-012:2017
---------------------- Page: 2 ----------------------
SIST EN 61010-2-012:2017
EUROPEAN STANDARD EN 61010-2-012
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 19.080
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-012: Particular requirements
for climatic and environmental testing and other temperature
conditioning equipment
(IEC 61010-2-012:2016)
Règles de sécurité pour appareils électriques de mesurage, Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
de régulation et de laboratoire - Partie 2-012: Exigences Regel- und Laborgeräte - Teil 2-012: Besondere
particulières pour les appareils d'essais climatiques et Anforderungen an Klima- und Umwelttestgeräte und andere
d'environnement, et autres appareils de conditionnement de Temperatur-Konditionierungsgeräte
température (IEC 61010-2-012:2016)
(IEC 61010-2-012:2016)
This European Standard was approved by CENELEC on 2016-08-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61010-2-012:2016 E
---------------------- Page: 3 ----------------------
SIST EN 61010-2-012:2017
EN 61010-2-012:2016
European foreword
The text of document 66/590/FDIS, future edition 1 of IEC 61010-2-012, prepared by IEC/TC 66 "Safety of
measuring, control and laboratory equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61010-2-012:2016.
The following dates are fixed:
(dop) 2017-05-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-08-19
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61010-2-012:201
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.