EN 55011:2009
(Main)Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
Includes FprAA:2009 (pr=21593)
Industrielle, wissenschaftliche und medizinische Geräte - Funkstörungen - Grenzwerte und Messverfahren
Appareils industriels, scientifiques et médicaux - Caractéristiques des perturbations radioélectriques - Limites et méthodes de mesure
Industrijska, znanstvena in medicinska (ISM) radiofrekvenčna oprema - Karakteristike občutljivosti za radijske motnje - Mejne vrednosti in merilne metode (CISPR 11:2009, spremenjen)
Ta mednarodni standard velja za industrijsko, znanstveno in medicinsko električno opremo v frekvenčnem razponu od 0 Hz do 400 GHz in za hišne in podobne aparate načrtovane za generiranje in/ali uporabljanje radio-frekvenčne energije. Ta standard zajema zahteve emisij, povezane z radio-frekvenčnimi (RF) motnjami v frekvenčnem razponu od 9kHz do 400 GHz. Meritve je potrebno opraviti samo v frekvenčnem razponu, za katerega so meje določene v Klavzuli 6. Za ISM RF uporabo v pomenu opredelitve, ki se nahaja v radijskih predpisih ITU (glej opredelitev 3.1), ta standard zajema zahteve emisij, povezane z radio-frekvenčnimi motnjami v frekvenčnem razponu od 9kHz do 18 GHz. Zahteve za ISM RF aparat za razsvetljavo in UV sevalnike, ki delujejo na frekvencah znotraj ISM frekvenčnih razponov določenih z radio uredbami ITU, so vsebovane v tem standardu. Oprema, zajeta z ostalimi CISPR proizvodi in standardi emisij družin proizvodov, so izvzete iz področja tega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrielle, wissenschaftliche und medizinische Geräte - Funkstörungen - Grenzwerte und MessverfahrenAppareils industriels, scientifiques et médicaux - Caractéristiques des perturbations radioélectriques - Limites et méthodes de mesureIndustrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement33.100.10EmisijaEmissionICS:Ta slovenski standard je istoveten z:EN 55011:2009SIST EN 55011:2010en01-februar-2010SIST EN 55011:2010SLOVENSKI
STANDARDSIST EN 55011:20071DGRPHãþD
EUROPEAN STANDARD EN 55011 NORME EUROPÉENNE
EUROPÄISCHE NORM November 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55011:2009 E
ICS 33.100.10 Supersedes EN 55011:2007 + A2:2007
English version
Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics -
Limits and methods of measurement (CISPR 11:2009, modified)
Appareils industriels,
scientifiques et médicaux -
Caractéristiques
des perturbations radioélectriques -
Limites et méthodes de mesure (CISPR 11:2009, modifiée)
Industrielle, wissenschaftliche
und medizinische Geräte -
Funkstörungen -
Grenzwerte und Messverfahren
(CISPR 11:2009, modifiziert)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2010-09-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2012-09-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2004/108/EC. See Annex ZZ. Annexes ZA, ZB and ZZ have been added by CENELEC. ____________ SIST EN 55011:2010
– 3 – EN 55011:2009 The main content of this standard is based on CISPR Recommendation No. 39/2 given below: RECOMMENDATION No. 39/2 Limits and methods of measurement of electromagnetic disturbance characteristics
of industrial, scientific and medical (ISM) radio-frequency equipment The CISPR CONSIDERING a)
that ISM RF equipment is an important source of disturbance; b) that methods of measuring such disturbances have been prescribed by the CISPR; c)
that certain frequencies are designated by the International Telecommunication Union (ITU) for unrestricted radiation from ISM equipment, RECOMMENDS that the latest edition of EN 55011 be used for the application of limits and methods of measurement of ISM equipment. SIST EN 55011:2010
for use as fundamental ISM frequencies Centre frequency MHz Frequency range MHz Maximum radiation limit a Number of appropriate footnote to the table of frequency allocation of the ITU Radio Regulations b 6,780 6,765 – 6,795 Under consideration 5.138 13,560 13,553 – 13,567 Unrestricted 5.150 27,120 26,957 – 27,283 Unrestricted 5.150 40,680 40,66 – 40,70 Unrestricted 5.150 433,920 433,05 – 434,79 Under consideration 5.138 in Region 1, except countries mentioned in 5.280 915,000 902 – 928 Unrestricted 5.150 in Region 2 only 2 450 2 400 – 2 500 Unrestricted 5.150 5 800 5 725 – 5 875 Unrestricted 5.150 24 125 24 000 – 24 250 Unrestricted 5.150 61 250 61 000 – 61 500 Under consideration 5.138 122 500 122 000 – 123 000 Under consideration 5.138 245 000 244 000 – 246 000 Under consideration 5.138 a The term “unrestricted” applies to the fundamental and all other frequency components falling within the designated band. Outside of ITU designated ISM bands the limits for the disturbance voltage and radiation disturbance in this standard apply. b Resolution No. 63 of the ITU Radio Regulations applies. In some CENELEC countries different or additional frequencies may be designated for use with ISM RF applications in the meaning of the definition found in the ITU Radio Regulations, see definition 3.1. These frequencies are listed in Table ZB.1 (see Annex ZB). The limits for the disturbance voltage and radiation disturbance defined in this standard do also not apply to the fundamental ISM frequencies listed in Table ZB.1. If ISM RF applications use fundamental frequencies other than the ITU or nationally designated frequencies, then the limits for the disturbance voltage and radiation disturbance of this standard apply also to these fundamental frequencies. SIST EN 55011:2010
– 5 – EN 55011:2009 Bibliography In the official version, for Bibliography, the following notes have to be added for the standards indicated: CISPR 15 NOTE
Harmonized as EN 55015:2006 (not modified). IEC 60364-5-51 NOTE
Harmonized as HD 60364-5-51:2009 (modified). IEC 60705 NOTE
Harmonized as EN 60705:1999 (not modified). IEC 61308 NOTE
Harmonized as EN 61308:2006 (not modified). IEC 61689 NOTE
Harmonized as EN 61689:2007 (not modified). IEC 61922 NOTE
Harmonized as EN 61922:2002 (not modified).
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
CISPR 16-1-1 A1 A2 2006 2006 2007 Specification for radio disturbance and immunity measuring apparatus and methods -Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus EN 55016-1-1 A1 A2 2007 2007 2008
CISPR 16-1-2 A1 A2 2003 2004 2006 Specification for radio disturbance and immunity measuring apparatus and methods -Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances EN 55016-1-2 A1 A2 2004 2005 2006
CISPR 16-1-4 A1 A2 2007 2007 2008 Specification for radio disturbance and immunity measuring apparatus and methods -Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances EN 55016-1-4 A1 A2 2007 2008 2009
CISPR 16-2-3 2006 Specification for radio disturbance and immunity measuring apparatus and methods -Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements EN 55016-2-3 2006
CISPR 16-4-2 2003 Specification for radio disturbance and immunity measuring apparatus and methods -Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurementsEN 55016-4-2 2004
IEC 60050-161 A1 A2 1990 1997 1998 International Electrotechnical Vocabulary
(IEV) -
Chapter 161: Electromagnetic compatibility – –
IEC 60601-1-2 (mod) 2007 Medical electrical equipment -
Part 1-2: General requirements for basic safetyand essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests EN 60601-1-2 2007
IEC 60601-2-2 2009 Medical electrical equipment -
Part 2-2: Particular requirements for basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories EN 60601-2-2 2009
IEC 60974-10 2007 Arc welding equipment -
Part 10: Electromagnetic compatibility (EMC) requirements EN 60974-10 2007
IEC 61307 2006 Industrial microwave heating installations - Test methods for the determination of power output EN 61307 2006
– 7 – EN 55011:2009 Publication Year Title EN/HD Year
IEC 62135-2 2007 Resistance welding equipment -
Part 2: Electromagnetic compatibility (EMC) requirements EN 62135-2 2008
ITU Radio Regulations 2008 Radio Regulations, Volume 3 - Resolutions and recommendations, resolution no. 63 - -
for use as fundamental ISM frequencies Table ZB.1 - Frequencies designated on a national basis in CENELEC countries
for use as fundamental ISM frequencies Frequency MHz Maximum radiation limit
Notes 0,009 - 0,010 83,996 - 84,004 167,992 - 168,008 886,000 - 906,000 Not limited Not limited Not limited Not limited Germany only United Kingdom only a United Kingdom only a United Kingdom only a a Radio communication services must accept harmful interference from ISM apparatus operating in accordance with the WT (Control of Interference from RF Heating Apparatus) Regulations 1971. The WT (Control of Interference from RF Heating Apparatus) Regulations 1971 specify the limits of levels of radiation permitted outside the ISM bands.
– 9 – EN 55011:2009 Annex ZZ (informative)
Coverage of Essential Requirements of EC Directives This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers protection requirements as given in Article 1(a) of Annex I of the EC Directive 2004/108/EC. Compliance with this standard provides presumption of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard. ____________ SIST EN 55011:2010
CISPR 11Edition 5.0 2009-05INTERNATIONAL STANDARD NORME INTERNATIONALEIndustrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
Appareils industriels, scientifiques et médicaux – Caractéristiques de perturbations radioélectriques – Limites et méthodes de mesure
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XAICS 33.100.10 PRICE CODECODE PRIXISBN 2-8318-1042-1INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES ® Registered trademark of the International Electrotechnical Commission
– 2 – CISPR 11 © IEC:2009
CONTENTS FOREWORD.5 INTRODUCTION.8 1 Scope.9 2 Normative references.9 3 Terms and definitions.10 4 Frequencies designated for ISM use.11 5 Classification of ISM equipment.12 5.1 Information for the user.12 5.2 Separation into groups.12 5.3 Division into classes.12 6 Limits of electromagnetic disturbances.13 6.1 General.13 6.2 Group 1 equipment measured o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.