EN 62386-208:2009
(Main)Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7)
Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7)
IEC 62386-208:2009 specifies a protocol and test methods for the control by digital signals of electronic control gear that switches its output only on and off. This Part 208 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevant product type (control gear or control devices).
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 208: Besondere Anforderungen an Betriebsgeräte - Schaltfunktion (Gerätetyp 7)
Interface d'éclairage adressable numérique - Partie 208: Exigences particulières pour les appareillages de commande - Fonction de commutation (dispositifs de type 7)
La CEI 62386-208:2009 spécifie un protocole et des méthodes d'essai applicables aux appareillages électroniques commandés par des signaux numériques qui disposent uniquement des options de mise sous tension et de mise hors tension de la sortie. Cette partie 208 est destinée à être utilisée conjointement avec la CEI 62386-101 et la CEI 62386-102, qui contiennent les exigences générales relatives au type de produit concerné (appareillage ou dispositifs de commande).
Digitalni naslovljivi vmesnik za razsvetljavo - 208. del: Posebne zahteve za krmilja - Stikalna funkcija (naprava tipa 7) (IEC 62386-208:2009)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2009
Digitalni naslovljivi vmesnik za razsvetljavo - 208. del: Posebne zahteve za krmilja -
Stikalna funkcija (naprava tipa 7) (IEC 62386-208:2009)
Digital addressable lighting Interface - Part 208: Particular requirements for control gear -
Switching function (device type 7) (IEC 62386-208:2009)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 208: Besondere
Anforderungen an Betriebsgeräte - Schaltfunktion (Gerätetyp 7) (IEC 62386-208:2009)
Interface d'éclairage adressable numérique -- Partie 208: Exigences particulières pour
les appareillages de commande - Fonction de commutation (dispositifs de type 7) (CEI
62386-208:2009)
Ta slovenski standard je istoveten z: EN 62386-208:2009
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62386-208
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 29.140.50; 29.140.99
English version
Digital addressable lighting interface -
Part 208: Particular requirements for control gear -
Switching function (device type 7)
(IEC 62386-208:2009)
Interface d'éclairage Digital adressierbare Schnittstelle
adressable numérique - für die Beleuchtung -
Partie 208: Exigences particulières Teil 208: Besondere Anforderungen
pour les appareillages de commande - an Betriebsgeräte -
Fonction de commutation Schaltfunktion (Gerätetyp 7)
(dispositifs de type 7) (IEC 62386-208:2009)
(CEI 62386-208:2009)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-208:2009 E
Foreword
The text of document 34C/821/CDV, future edition 1 of IEC 62386-208, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62386-208 on 2009-07-01.
This Part 208 is intended to be used in conjunction with EN 62386-101 and EN 62386-102, which contain
general requirements for the relevant product type (control gear or control devices).
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62386-208:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (modified).
IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1:2004 (modified).
IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified).
IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified).
IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified).
IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified).
IEC 61347-1 NOTE Harmonized as EN 61347-1:2008 (modified).
IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified).
IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified).
CISPR 15 NOTE Harmonized as EN 55015:2006 (not modified).
__________
- 3 - EN 62386-208:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 62386-101 2009 Digital addressable lighting interface - EN 62386-101 2009
Part 101: General requirements - System
IEC 62386-102 2009 Digital addressable lighting interface - EN 62386-102 2009
Part 102: General requirements - Control gear
IEC 62386-208 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –
Part 208: Particular requirements for control gear – Switching function
(device type 7)
Interface d’éclairage adressable numérique –
Partie 208: Exigences particulières pour les appareillages de commande –
Fonction de commutation (dispositif de type 7)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XB
CODE PRIX
ICS 29.140.50; 29.140.99 ISBN 2-8318-1013-7
– 2 – 62386-208 © IEC:2009
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms and definitions .8
4 General description .8
5 Electrical specification.9
6 Interface power supply .9
7 Transmission protocol structure.9
8 Timing .9
9 Method of operation .9
10 Declaration of variables .11
11 Definition of commands .12
12 Test procedures .18
Annex A (informative) Examples of algorithms .70
Bibliography.71
Figure 1 – Example of a possible configuration .11
Figure 2 – Application extended configuration command sequence example.13
Figure 3 – Test sequence QUERY FEATURES .19
Figure 4 – Test sequence Reset State / Persistent Memory .20
Figure 5 – Test sequence QUERY LOAD ERROR.22
Figure 6 – Test sequence QUERY LOAD ERROR with HOLD-OFF TIME .23
Figure 7 – Test sequence QUERY LOAD ERROR with indefinitely HOLD-OFF TIME .24
Figure 8 – Test sequence QUERY Control Gear Information .25
Figure 9 – Test sequence REFERENCE SYSTEM POWER.26
Figure 10 – Test sequence REFERENCE SYSTEM POWER: 100 ms-timeout.27
Figure 11 – Test sequence REFERENCE SYSTEM POWER: Command in-between .28
Figure 12 – Test sequence REFERENCE SYSTEM POWER: 15 min timer.29
Figure 13 – Test sequence REFERENCE SYSTEM POWER: failed .30
Figure 14 – Test sequence THRESHOLDS: Configuration Sequence .31
Figure 15 – Test sequence ERROR HOLD-OFF TIME: Configuration Sequence .33
Figure 16 – Test sequence STORE DTR AS THRESHOLD X .34
Figure 17 – Test sequence STORE DTR AS MIN / MAX LEVEL .35
Figure 18 – Test sequence STORE DTR AS ERROR HOLD-OFF TIME .36
Figure 19 – Test sequence ENABLE DEVICE TYPE: Appl. extended query commands.37
Figure 20 – Test sequence ENABLE DEVICE TYPE: Reference System Power .38
Figure 21 – Test sequence ENABLE DEVICE TYPE: Other Application Extended
Configuration Commands.39
Figure 22 – Test sequence ENABLE DEVICE TYPE: Error Hold-Off Time .41
Figure 23 – Test sequence ENABLE DEVICE TYPE: Application Extended
Configuration Commands 2.42
62386-208 © IEC:2009 – 3 –
Figure 24 – Test sequence DEFAULT ON AND OFF .44
Figure 25 – Test sequence DEFAULT OFF WITH FADING .45
Figure 26 – Test sequence SWITCHING ON AND OFF – FULL RANGE.47
Figure 27 – Test sequence SWITCHING ON AND OFF – LIMITED RANGE .51
Figure 28 – Test sequence VIRTUAL DIMMING – FADE TIME.54
Figure 29 – Test sequence VIRTUAL DIMMING – FADE RATE.56
Figure 30 – Test sequence SWITCHING ON AND OFF – IAPC .57
Figure 31 – Test sequence SWITCHING ON AND OFF – ADJUSTING THRESHOLDS .58
Figure 32 – Test sequence SWITCHING ON AND OFF – ADJUSTING MIN/MAX .60
Figure 33 – Test sequence SWITCHING ON AND OFF – DEFAULT POL/SYS.62
Figure 34 – Test sequence SWITCHING ON AND OFF – POWER ON .64
Figure 35 – Test sequence SWITCHING ON AND OFF – SYSTEM FAILURE.66
Figure 36 – Test sequence QUERY EXTENDED VERSION NUMBER .68
Figure 37 – Test sequence RESERVED APPLICATION EXTENDED COMMANDS.69
Figure A.1 – Examples of switching characteristics .70
Table 1 – virtual arc power level (VAPL) .11
Table 2 – Declaration of variables.12
Table 3 – Summary of the application extended command set .18
Table 4 – Parameters for the test sequence State / Persistent Memory.21
Table 5 – Test step QUERY LOAD ERROR with HOLD-OFF TIME.23
Table 6 – Test steps REFERENCE SYSTEM POWER: Command in-between.28
Table 7 – Test parameter and test steps 1 THRESHOLDS: Configuration Sequence.31
Table 8 – Test parameter and test steps 2 THRESHOLDS: Configuration Sequence.32
Table 9 – Test parameter and test steps 3 THRESHOLDS: Configuration Sequence.32
Table 10 – Test steps ERROR HOLD-OFF TIME: Configuration Sequence .33
Table 11 – Test steps STORE DTR AS THRESHOLD X.34
Table 12 – Test steps STORE DTR AS MIN / MAX LEVEL.35
Table 13 – Test steps STORE DTR AS ERROR HOLD-OFF TIME .36
Table 14 – Test steps ENABLE DEVICE TYPE: Appl. extended query commands.37
Table 15 – Test steps ENABLE DEVICE TYPE: Reference System Power .38
Table 16 – Test steps 1 ENABLE DEVICE TYPE: Other Application Extended
Configuration Commands.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.