EN 61131-5:2001

Programmable controllers - Part 5: Communications

Specifies communication aspects of a programmable controller.

Speicherprogrammierbare Steuerungen - Teil 5: Kommunikation

Contrôleurs programmables - Partie 5: Communications

La CEI 61131-5:2000 spécifie les aspects des automates programmables (AP) relatifs à la communication. Elle spécifie, du point de vue d'un AP, la manière dont chaque périphérique peut communiquer avec un AP en tant que serveur et la manière dont l'AP peut communiquer avec chaque périphérique. Elle spécifie, en particulier, le comportement de l'AP lorsqu'il fournit des services pour le compte d'autres périphériques et les services que le programme application de l'AP peut demander aux autres périphériques. La présente version bilingue (2012-08) correspond à la version anglaise monolingue publiée en 2000-11. Cette publication doit être lue conjointement avec la série CEI 61131.

Programmable controllers - Part 5: Communications

General Information

• Status: Published
• Publication Date: 08-Feb-2001
• Withdrawal Date: 31-Dec-2003
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Parallel Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Feb-2001
• Completion Date: 09-Feb-2001
• Ref Project: SIST EN 61131-5:2002 - Programmable controllers -- Part 5: Communications

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61131-5:2002
01-september-2002
Programmable controllers - Part 5: Communications
Programmable controllers -- Part 5: Communications
Speicherprogrammierbare Steuerungen -- Teil 5: Kommunikation
Contrôleurs programmables -- Partie 5: Communications
Ta slovenski standard je istoveten z: EN 61131-5:2001
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61131-5:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61131-5:2002

---------------------- Page: 2 ----------------------

SIST EN 61131-5:2002
EUROPEAN STANDARD EN 61131-5
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 25.040.40;25.240.50
English version
Programmable controllers
Part 5: Communications
(IEC 61131-5:2000)
Contrôleurs programmables Speicherprogrammierbare Steuerungen
Partie 5: Communications Teil 5: Kommunikation
(CEI 61131-5:2000) (IEC 61131-5:2000)
This European Standard was approved by CENELEC on 2001-01-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61131-5:2001 E

---------------------- Page: 3 ----------------------

SIST EN 61131-5:2002
EN 61131-5:2001 - 2 -
Foreword
The text of document 65B/411/FDIS, future edition 1 of IEC 61131-5, prepared by SC 65B, Devices,
of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61131-5 on 2001-01-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-01-01
This part is to be read in conjunction with the other parts of EN 61131.
Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A, B and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61131-5:2000 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61131-5:2002
- 3 - EN 61131-5:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-351 1998 International Electrotechnical Vocabulary--
Part 351: Automatic control
IEC 61131-1 1992 Programmable controllers EN 61131-1 1994
Part 1: General information
IEC 61131-2 1992 Part 2: Equipment requirements and tests EN 61131-2 1994
+ corr. December 1997
+ A11 1996
+ corr. December 1997
+ A12 2000
IEC 61131-3 1993 Part 3: Programming languages EN 61131-3 1993
ISO/IEC 2382-1 1993 Information technology - Vocabulary --
Part 1: Fundamental terms
ISO/IEC 9506-1 1990 Industrial automation systems - EN 29506-1 1993
Manufacturing message specification
Part
...